openwrt/target/linux/ath79/dts/qca9558_netgear_ex7300.dtsi

219 lines
3.7 KiB
Plaintext
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca9557.dtsi"
/ {
aliases {
led-boot = &power_green;
led-failsafe = &power_amber;
led-running = &power_green;
led-upgrade = &power_amber;
};
led_spi {
compatible = "spi-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpio-sck = <&gpio 18 GPIO_ACTIVE_HIGH>;
gpio-mosi = <&gpio 15 GPIO_ACTIVE_HIGH>;
num-chipselects = <0>;
led_gpio: led_gpio@0 {
compatible = "nxp,74lvc594";
reg = <0>;
gpio-controller;
#gpio-cells = <2>;
registers-number = <1>;
lines-initial-states = /bits/ 8 <0xff>;
spi-max-frequency = <500000>;
gpio_latch_bit {
gpio-hog;
gpios = <4 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "gpio-latch-bit";
};
};
};
leds {
compatible = "gpio-leds";
power_green: power_green {
label = "netgear:green:power";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
power_amber: power_amber {
label = "netgear:amber:power";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
left_blue {
label = "netgear:blue:left";
gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
};
right_blue {
label = "netgear:blue:right";
gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
};
wps_green {
label = "netgear:green:wps";
gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
};
client_red {
label = "netgear:red:client";
gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
};
client_green {
label = "netgear:green:client";
gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
};
router_red {
label = "netgear:red:router";
gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
};
router_green {
label = "netgear:green:router";
gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
wps {
label = "WPS button";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
extender_apmode {
label = "EXTENDER/APMODE switch";
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
debounce-interval = <60>;
};
};
};
&pcie0 {
status = "okay";
};
&uart {
status = "okay";
};
&pll {
clocks = <&extosc>;
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
caldata: partition@50000 {
label = "caldata";
reg = <0x050000 0x010000>;
read-only;
};
partition@60000 {
label = "caldata-backup";
reg = <0x060000 0x010000>;
read-only;
};
partition@70000 {
label = "config";
reg = <0x070000 0x010000>;
};
partition@80000 {
label = "pot";
reg = <0x080000 0x010000>;
};
partition@90000 {
label = "firmware";
reg = <0x090000 0xf30000>;
compatible = "denx,uimage";
};
partition@fc0000 {
label = "language";
reg = <0xfc0000 0x040000>;
};
};
};
};
&wmac {
status = "okay";
mtd-cal-data = <&caldata 0x1000>;
mtd-mac-address = <&caldata 0x06>;
};
&mdio0 {
status = "okay";
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "rgmii";
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&caldata 0x00>;
phy-handle = <&phy4>;
phy-mode = "rgmii-rxid";
pll-data = <0x86000000 0x80000101 0x80001313>;
};