openwrt/target/linux/bcm27xx/patches-5.15/950-0589-input-edt-ft5x06-Only-look-at-the-number-of-points-r.patch

From 066255aaae527ace73f85d698a6668a752785d1c Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Tue, 30 Nov 2021 17:28:50 +0000
Subject: [PATCH] input: edt-ft5x06: Only look at the number of points
 reported

Register 0x02 in the FT5x06 is TD_STATUS containing the number
of valid touch points being reported.

Iterate over that number of points rather than all that are
supported on the device.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 drivers/input/touchscreen/edt-ft5x06.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -205,6 +205,7 @@ static irqreturn_t edt_ft5x06_ts_isr(int
 	unsigned int active_ids = 0, known_ids = tsdata->known_ids;
 	long released_ids;
 	int b = 0;
+	unsigned int num_points;
 
 	switch (tsdata->version) {
 	case EDT_M06:
@@ -252,9 +253,15 @@ static irqreturn_t edt_ft5x06_ts_isr(int
 
 		if (!edt_ft5x06_ts_check_crc(tsdata, rdbuf, datalen))
 			goto out;
+		num_points = tsdata->max_support_points;
+	} else {
+		/* Register 2 is TD_STATUS, containing the number of touch
+		 * points.
+		 */
+		num_points = min(rdbuf[2] & 0xf, tsdata->max_support_points);
 	}
 
-	for (i = 0; i < tsdata->max_support_points; i++) {
+	for (i = 0; i < num_points; i++) {
 		u8 *buf = &rdbuf[i * tplen + offset];
 
 		type = buf[0] >> 6;