openwrt/target/linux/ramips/patches-4.3/0008-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch

From 0fd52df8bce3be9edbc195b120bc9a68f970d9e5 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Mon, 4 Aug 2014 20:43:25 +0200
Subject: [PATCH 08/53] MIPS: ralink: mt7620: fix usb issue during frequency
 scaling

 If the USB HCD is running and the cpu is scaled too low, then the USB stops
 working. Increase the idle speed of the core to fix this if the kernel is
 built with USB support.

 The values are taken from the Ralink SDK Kernel.

 Signed-off-by: John Crispin <blogic@openwrt.org>
---
 arch/mips/ralink/mt7620.c |   19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -40,6 +40,12 @@
 /* is this a MT7620 or a MT7628 */
 enum mt762x_soc_type mt762x_soc;
 
+/* clock scaling */
+#define CLKCFG_FDIV_MASK	0x1f00
+#define CLKCFG_FDIV_USB_VAL	0x0300
+#define CLKCFG_FFRAC_MASK	0x001f
+#define CLKCFG_FFRAC_USB_VAL	0x0003
+
 /* does the board have sdram or ddram */
 static int dram_type;
 
@@ -423,6 +429,19 @@ void __init ralink_clk_init(void)
 	ralink_clk_add("10000b00.spi", sys_rate);
 	ralink_clk_add("10000c00.uartlite", periph_rate);
 	ralink_clk_add("10180000.wmac", xtal_rate);
+
+	if (IS_ENABLED(CONFIG_USB)) {
+		/*
+		 * When the CPU goes into sleep mode, the BUS clock will be too low for
+		 * USB to function properly
+		 */
+		u32 val = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
+
+		val &= ~(CLKCFG_FDIV_MASK | CLKCFG_FFRAC_MASK);
+		val |= CLKCFG_FDIV_USB_VAL | CLKCFG_FFRAC_USB_VAL;
+
+		rt_sysc_w32(val, SYSC_REG_CPU_SYS_CLKCFG);
+	}
 }
 
 void __init ralink_of_remap(void)