openwrt/target/linux/layerscape/patches-4.14/812-flexspi-support-layerscape.patch

From 9875df1e872eb2b0f9d2d72c9a761a5f03400d9f Mon Sep 17 00:00:00 2001
From: Biwen Li <biwen.li@nxp.com>
Date: Fri, 19 Apr 2019 13:23:01 +0800
Subject: [PATCH] flexspi: support layerscape

This is an integrated patch of flexspi for layerscape

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
---
 .../devicetree/bindings/mtd/nxp-flexspi.txt   |   41 +
 drivers/mtd/spi-nor/Kconfig                   |   10 +
 drivers/mtd/spi-nor/Makefile                  |    1 +
 drivers/mtd/spi-nor/nxp-flexspi.c             | 1404 +++++++++++++++++
 drivers/mtd/spi-nor/spi-nor.c                 |   13 +-
 include/linux/mtd/cfi.h                       |    1 +
 include/linux/mtd/spi-nor.h                   |    3 +-
 7 files changed, 1470 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mtd/nxp-flexspi.txt
 create mode 100644 drivers/mtd/spi-nor/nxp-flexspi.c

--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/nxp-flexspi.txt
@@ -0,0 +1,41 @@
+* NXP Flex Serial Peripheral Interface(FlexSPI)
+
+Required properties:
+  - compatible : Should be "nxp,lx2160a-fspi"
+  - reg : the first contains the register location and length,
+          the second contains the memory mapping address and length
+  - reg-names: Should contain the reg names "FSPI" and "FSPI-memory"
+  - interrupts : Should contain the interrupt for the device
+  - clocks : The clocks needed by the FlexSPI controller
+  - clock-names : Should contain the name of the clocks: "fspi_en" and "fspi"
+
+Optional properties:
+  - nxp,fspi-has-second-chip: The controller has two buses, bus A and bus B.
+			      Each bus can be connected with two NOR flashes.
+			      Most of the time, each bus only has one NOR flash
+			      connected, this is the default case.
+			      But if there are two NOR flashes connected to the
+			      bus, you should enable this property.
+			      (Please check the board's schematic.)
+Example:
+fspi0: flexspi@20c0000 {
+	compatible = "nxp,lx2160a-fspi";
+	reg = <0x0 0x20c0000 0x0 0x10000>, <0x0 0x20000000 0x0 0x10000000>;
+	reg-names = "FSPI", "FSPI-memory";
+	interrupts = <0 25 0x4>; /* Level high type */
+	clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+	clock-names = "fspi_en", "fspi";
+
+	status = "okay";
+	nxp,fspi-has-second-chip;
+	flash0: mt35xu512aba@0 {
+		reg = <0>;
+		....
+	};
+
+	flash1: mt35xu512aba@1 {
+		reg = <1>;
+		....
+	};
+
+};
--- a/drivers/mtd/spi-nor/Kconfig
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -97,6 +97,16 @@ config SPI_NXP_SPIFI
 	  Flash. Enable this option if you have a device with a SPIFI
 	  controller and want to access the Flash as a mtd device.
 
+config	SPI_NXP_FLEXSPI
+	 tristate "NXP Flex SPI controller"
+	 help
+	   This enables support for the Flex SPI controller in master mode.
+	   Up to four slave devices can be connected on two buses with two
+	   chipselects each.
+	   This controller does not support generic SPI messages and only
+	   supports the high-level SPI memory interface using SPI-NOR
+	   framework.
+
 config SPI_INTEL_SPI
 	tristate
 
--- a/drivers/mtd/spi-nor/Makefile
+++ b/drivers/mtd/spi-nor/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_SPI_FSL_QUADSPI)	+= fsl-qua
 obj-$(CONFIG_SPI_HISI_SFC)	+= hisi-sfc.o
 obj-$(CONFIG_MTD_MT81xx_NOR)    += mtk-quadspi.o
 obj-$(CONFIG_SPI_NXP_SPIFI)	+= nxp-spifi.o
+obj-$(CONFIG_SPI_NXP_FLEXSPI)	+= nxp-flexspi.o
 obj-$(CONFIG_SPI_INTEL_SPI)	+= intel-spi.o
 obj-$(CONFIG_SPI_INTEL_SPI_PCI)	+= intel-spi-pci.o
 obj-$(CONFIG_SPI_INTEL_SPI_PLATFORM)	+= intel-spi-platform.o
--- /dev/null
+++ b/drivers/mtd/spi-nor/nxp-flexspi.c
@@ -0,0 +1,1404 @@
+/*
+ * NXP FSPI(FlexSPI controller) driver.
+ *
+ * Copyright 2018 NXP
+ * Author: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/timer.h>
+#include <linux/jiffies.h>
+#include <linux/completion.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/spi-nor.h>
+#include <linux/mutex.h>
+#include <linux/pm_qos.h>
+#include <linux/pci.h>
+
+/* The registers */
+#define FSPI_MCR0			0x00
+#define FSPI_MCR0_AHB_TIMEOUT_SHIFT	24
+#define FSPI_MCR0_AHB_TIMEOUT_MASK	(0xFF << FSPI_MCR0_AHB_TIMEOUT_SHIFT)
+#define FSPI_MCR0_IP_TIMEOUT_SHIFT	16
+#define FSPI_MCR0_IP_TIMEOUT_MASK	(0xFF << FSPI_MCR0_IP_TIMEOUT_SHIFT)
+#define FSPI_MCR0_LEARN_EN_SHIFT	15
+#define FSPI_MCR0_LEARN_EN_MASK		(1 << FSPI_MCR0_LEARN_EN_SHIFT)
+#define FSPI_MCR0_SCRFRUN_EN_SHIFT	14
+#define FSPI_MCR0_SCRFRUN_EN_MASK	(1 << FSPI_MCR0_SCRFRUN_EN_SHIFT)
+#define FSPI_MCR0_OCTCOMB_EN_SHIFT	13
+#define FSPI_MCR0_OCTCOMB_EN_MASK	(1 << FSPI_MCR0_OCTCOMB_EN_SHIFT)
+#define FSPI_MCR0_DOZE_EN_SHIFT		12
+#define FSPI_MCR0_DOZE_EN_MASK		(1 << FSPI_MCR0_DOZE_EN_SHIFT)
+#define FSPI_MCR0_HSEN_SHIFT		11
+#define FSPI_MCR0_HSEN_MASK		(1 << FSPI_MCR0_HSEN_SHIFT)
+#define FSPI_MCR0_SERCLKDIV_SHIFT	8
+#define FSPI_MCR0_SERCLKDIV_MASK	(7 << FSPI_MCR0_SERCLKDIV_SHIFT)
+#define FSPI_MCR0_ATDF_EN_SHIFT		7
+#define FSPI_MCR0_ATDF_EN_MASK		(1 << FSPI_MCR0_ATDF_EN_SHIFT)
+#define FSPI_MCR0_ARDF_EN_SHIFT		6
+#define FSPI_MCR0_ARDF_EN_MASK		(1 << FSPI_MCR0_ARDF_EN_SHIFT)
+#define FSPI_MCR0_RXCLKSRC_SHIFT	4
+#define FSPI_MCR0_RXCLKSRC_MASK		(3 << FSPI_MCR0_RXCLKSRC_SHIFT)
+#define FSPI_MCR0_END_CFG_SHIFT		2
+#define FSPI_MCR0_END_CFG_MASK		(3 << FSPI_MCR0_END_CFG_SHIFT)
+#define FSPI_MCR0_MDIS_SHIFT		1
+#define FSPI_MCR0_MDIS_MASK		(1 << FSPI_MCR0_MDIS_SHIFT)
+#define FSPI_MCR0_SWRST_SHIFT		0
+#define FSPI_MCR0_SWRST_MASK		(1 << FSPI_MCR0_SWRST_SHIFT)
+
+#define FSPI_MCR1			0x04
+#define FSPI_MCR1_SEQ_TIMEOUT_SHIFT	16
+#define FSPI_MCR1_SEQ_TIMEOUT_MASK	\
+	(0xFFFF << FSPI_MCR1_SEQ_TIMEOUT_SHIFT)
+#define FSPI_MCR1_AHB_TIMEOUT_SHIFT	0
+#define FSPI_MCR1_AHB_TIMEOUT_MASK	\
+	(0xFFFF << FSPI_MCR1_AHB_TIMEOUT_SHIFT)
+
+#define FSPI_MCR2			0x08
+#define FSPI_MCR2_IDLE_WAIT_SHIFT	24
+#define FSPI_MCR2_IDLE_WAIT_MASK	(0xFF << FSPI_MCR2_IDLE_WAIT_SHIFT)
+#define FSPI_MCR2_SAMEFLASH_SHIFT	15
+#define FSPI_MCR2_SAMEFLASH_MASK	(1 << FSPI_MCR2_SAMEFLASH_SHIFT)
+#define FSPI_MCR2_CLRLRPHS_SHIFT	14
+#define FSPI_MCR2_CLRLRPHS_MASK		(1 << FSPI_MCR2_CLRLRPHS_SHIFT)
+#define FSPI_MCR2_ABRDATSZ_SHIFT	8
+#define FSPI_MCR2_ABRDATSZ_MASK		(1 << FSPI_MCR2_ABRDATSZ_SHIFT)
+#define FSPI_MCR2_ABRLEARN_SHIFT	7
+#define FSPI_MCR2_ABRLEARN_MASK		(1 << FSPI_MCR2_ABRLEARN_SHIFT)
+#define FSPI_MCR2_ABR_READ_SHIFT	6
+#define FSPI_MCR2_ABR_READ_MASK		(1 << FSPI_MCR2_ABR_READ_SHIFT)
+#define FSPI_MCR2_ABRWRITE_SHIFT	5
+#define FSPI_MCR2_ABRWRITE_MASK		(1 << FSPI_MCR2_ABRWRITE_SHIFT)
+#define FSPI_MCR2_ABRDUMMY_SHIFT	4
+#define FSPI_MCR2_ABRDUMMY_MASK		(1 << FSPI_MCR2_ABRDUMMY_SHIFT)
+#define FSPI_MCR2_ABR_MODE_SHIFT	3
+#define FSPI_MCR2_ABR_MODE_MASK		(1 << FSPI_MCR2_ABR_MODE_SHIFT)
+#define FSPI_MCR2_ABRCADDR_SHIFT	2
+#define FSPI_MCR2_ABRCADDR_MASK		(1 << FSPI_MCR2_ABRCADDR_SHIFT)
+#define FSPI_MCR2_ABRRADDR_SHIFT	1
+#define FSPI_MCR2_ABRRADDR_MASK		(1 << FSPI_MCR2_ABRRADDR_SHIFT)
+#define FSPI_MCR2_ABR_CMD_SHIFT		0
+#define FSPI_MCR2_ABR_CMD_MASK		(1 << FSPI_MCR2_ABR_CMD_SHIFT)
+
+#define FSPI_AHBCR			0x0c
+#define FSPI_AHBCR_RDADDROPT_SHIFT	6
+#define FSPI_AHBCR_RDADDROPT_MASK	(1 << FSPI_AHBCR_RDADDROPT_SHIFT)
+#define FSPI_AHBCR_PREF_EN_SHIFT	5
+#define FSPI_AHBCR_PREF_EN_MASK		(1 << FSPI_AHBCR_PREF_EN_SHIFT)
+#define FSPI_AHBCR_BUFF_EN_SHIFT	4
+#define FSPI_AHBCR_BUFF_EN_MASK		(1 << FSPI_AHBCR_BUFF_EN_SHIFT)
+#define FSPI_AHBCR_CACH_EN_SHIFT	3
+#define FSPI_AHBCR_CACH_EN_MASK		(1 << FSPI_AHBCR_CACH_EN_SHIFT)
+#define FSPI_AHBCR_CLRTXBUF_SHIFT	2
+#define FSPI_AHBCR_CLRTXBUF_MASK	(1 << FSPI_AHBCR_CLRTXBUF_SHIFT)
+#define FSPI_AHBCR_CLRRXBUF_SHIFT	1
+#define FSPI_AHBCR_CLRRXBUF_MASK	(1 << FSPI_AHBCR_CLRRXBUF_SHIFT)
+#define FSPI_AHBCR_PAR_EN_SHIFT		0
+#define FSPI_AHBCR_PAR_EN_MASK		(1 << FSPI_AHBCR_PAR_EN_SHIFT)
+
+#define FSPI_INTEN			0x10
+#define FSPI_INTEN_SCLKSBWR_SHIFT	9
+#define FSPI_INTEN_SCLKSBWR_MASK	(1 << FSPI_INTEN_SCLKSBWR_SHIFT)
+#define FSPI_INTEN_SCLKSBRD_SHIFT	8
+#define FSPI_INTEN_SCLKSBRD_MASK	(1 << FSPI_INTEN_SCLKSBRD_SHIFT)
+#define FSPI_INTEN_DATALRNFL_SHIFT	7
+#define FSPI_INTEN_DATALRNFL_MASK	(1 << FSPI_INTEN_DATALRNFL_SHIFT)
+#define FSPI_INTEN_IPTXWE_SHIFT		6
+#define FSPI_INTEN_IPTXWE_MASK		(1 << FSPI_INTEN_IPTXWE_SHIFT)
+#define FSPI_INTEN_IPRXWA_SHIFT		5
+#define FSPI_INTEN_IPRXWA_MASK		(1 << FSPI_INTEN_IPRXWA_SHIFT)
+#define FSPI_INTEN_AHBCMDERR_SHIFT	4
+#define FSPI_INTEN_AHBCMDERR_MASK	(1 << FSPI_INTEN_AHBCMDERR_SHIFT)
+#define FSPI_INTEN_IPCMDERR_SHIFT	3
+#define FSPI_INTEN_IPCMDERR_MASK	(1 << FSPI_INTEN_IPCMDERR_SHIFT)
+#define FSPI_INTEN_AHBCMDGE_SHIFT	2
+#define FSPI_INTEN_AHBCMDGE_MASK	(1 << FSPI_INTEN_AHBCMDGE_SHIFT)
+#define FSPI_INTEN_IPCMDGE_SHIFT	1
+#define FSPI_INTEN_IPCMDGE_MASK		(1 << FSPI_INTEN_IPCMDGE_SHIFT)
+#define FSPI_INTEN_IPCMDDONE_SHIFT	0
+#define FSPI_INTEN_IPCMDDONE_MASK	(1 << FSPI_INTEN_IPCMDDONE_SHIFT)
+
+#define FSPI_INTR			0x14
+#define FSPI_INTR_SCLKSBWR_SHIFT	9
+#define FSPI_INTR_SCLKSBWR_MASK		(1 << FSPI_INTR_SCLKSBWR_SHIFT)
+#define FSPI_INTR_SCLKSBRD_SHIFT	8
+#define FSPI_INTR_SCLKSBRD_MASK		(1 << FSPI_INTR_SCLKSBRD_SHIFT)
+#define FSPI_INTR_DATALRNFL_SHIFT	7
+#define FSPI_INTR_DATALRNFL_MASK	(1 << FSPI_INTR_DATALRNFL_SHIFT)
+#define FSPI_INTR_IPTXWE_SHIFT		6
+#define FSPI_INTR_IPTXWE_MASK		(1 << FSPI_INTR_IPTXWE_SHIFT)
+#define FSPI_INTR_IPRXWA_SHIFT		5
+#define FSPI_INTR_IPRXWA_MASK		(1 << FSPI_INTR_IPRXWA_SHIFT)
+#define FSPI_INTR_AHBCMDERR_SHIFT	4
+#define FSPI_INTR_AHBCMDERR_MASK	(1 << FSPI_INTR_AHBCMDERR_SHIFT)
+#define FSPI_INTR_IPCMDERR_SHIFT	3
+#define FSPI_INTR_IPCMDERR_MASK		(1 << FSPI_INTR_IPCMDERR_SHIFT)
+#define FSPI_INTR_AHBCMDGE_SHIFT	2
+#define FSPI_INTR_AHBCMDGE_MASK		(1 << FSPI_INTR_AHBCMDGE_SHIFT)
+#define FSPI_INTR_IPCMDGE_SHIFT		1
+#define FSPI_INTR_IPCMDGE_MASK		(1 << FSPI_INTR_IPCMDGE_SHIFT)
+#define FSPI_INTR_IPCMDDONE_SHIFT	0
+#define FSPI_INTR_IPCMDDONE_MASK	(1 << FSPI_INTR_IPCMDDONE_SHIFT)
+
+#define FSPI_LUTKEY			0x18
+#define FSPI_LUTKEY_VALUE		0x5AF05AF0
+
+#define FSPI_LCKCR			0x1C
+#define FSPI_LCKER_LOCK			0x1
+#define FSPI_LCKER_UNLOCK		0x2
+
+#define FSPI_BUFXCR_INVALID_MSTRID	0xe
+#define FSPI_AHBRX_BUF0CR0		0x20
+#define FSPI_AHBRX_BUF1CR0		0x24
+#define FSPI_AHBRX_BUF2CR0		0x28
+#define FSPI_AHBRX_BUF3CR0		0x2C
+#define FSPI_AHBRX_BUF4CR0		0x30
+#define FSPI_AHBRX_BUF5CR0		0x34
+#define FSPI_AHBRX_BUF6CR0		0x38
+#define FSPI_AHBRX_BUF7CR0		0x3C
+#define FSPI_AHBRXBUF0CR7_PREF_SHIFT	31
+#define FSPI_AHBRXBUF0CR7_PREF_MASK	(1 << FSPI_AHBRXBUF0CR7_PREF_SHIFT)
+
+#define FSPI_AHBRX_BUF0CR1		0x40
+#define FSPI_AHBRX_BUF1CR1		0x44
+#define FSPI_AHBRX_BUF2CR1		0x48
+#define FSPI_AHBRX_BUF3CR1		0x4C
+#define FSPI_AHBRX_BUF4CR1		0x50
+#define FSPI_AHBRX_BUF5CR1		0x54
+#define FSPI_AHBRX_BUF6CR1		0x58
+#define FSPI_AHBRX_BUF7CR1		0x5C
+#define FSPI_BUFXCR1_MSID_SHIFT		0
+#define FSPI_BUFXCR1_MSID_MASK		(0xF << FSPI_BUFXCR1_MSID_SHIFT)
+#define FSPI_BUFXCR1_PRIO_SHIFT		8
+#define FSPI_BUFXCR1_PRIO_MASK		(0x7 << FSPI_BUFXCR1_PRIO_SHIFT)
+
+#define FSPI_FLSHA1CR0			0x60
+#define FSPI_FLSHA2CR0			0x64
+#define FSPI_FLSHB1CR0			0x68
+#define FSPI_FLSHB2CR0			0x6C
+#define FSPI_FLSHXCR0_SZ_SHIFT		10
+#define FSPI_FLSHXCR0_SZ_MASK		(0x3FFFFF << FSPI_FLSHXCR0_SZ_SHIFT)
+
+#define FSPI_FLSHA1CR1			0x70
+#define FSPI_FLSHA2CR1			0x74
+#define FSPI_FLSHB1CR1			0x78
+#define FSPI_FLSHB2CR1			0x7C
+#define FSPI_FLSHXCR1_CSINTR_SHIFT	16
+#define FSPI_FLSHXCR1_CSINTR_MASK	\
+		(0xFFFF << FSPI_FLSHXCR1_CSINTR_SHIFT)
+#define FSPI_FLSHXCR1_CAS_SHIFT		11
+#define FSPI_FLSHXCR1_CAS_MASK		(0xF << FSPI_FLSHXCR1_CAS_SHIFT)
+#define FSPI_FLSHXCR1_WA_SHIFT		10
+#define FSPI_FLSHXCR1_WA_MASK		(1 << FSPI_FLSHXCR1_WA_SHIFT)
+#define FSPI_FLSHXCR1_TCSH_SHIFT	5
+#define FSPI_FLSHXCR1_TCSH_MASK		(0x1F << FSPI_FLSHXCR1_TCSH_SHIFT)
+#define FSPI_FLSHXCR1_TCSS_SHIFT	0
+#define FSPI_FLSHXCR1_TCSS_MASK		(0x1F << FSPI_FLSHXCR1_TCSS_SHIFT)
+
+#define FSPI_FLSHA1CR2			0x80
+#define FSPI_FLSHA2CR2			0x84
+#define FSPI_FLSHB1CR2			0x88
+#define FSPI_FLSHB2CR2			0x8C
+#define FSPI_FLSHXCR2_CLRINSP_SHIFT	24
+#define FSPI_FLSHXCR2_CLRINSP_MASK	(1 << FSPI_FLSHXCR2_CLRINSP_SHIFT)
+#define FSPI_FLSHXCR2_AWRWAIT_SHIFT	16
+#define FSPI_FLSHXCR2_AWRWAIT_MASK	(0xFF << FSPI_FLSHXCR2_AWRWAIT_SHIFT)
+#define FSPI_FLSHXCR2_AWRSEQN_SHIFT	13
+#define FSPI_FLSHXCR2_AWRSEQN_MASK	(0x7 << FSPI_FLSHXCR2_AWRSEQN_SHIFT)
+#define FSPI_FLSHXCR2_AWRSEQI_SHIFT	8
+#define FSPI_FLSHXCR2_AWRSEQI_MASK	(0xF << FSPI_FLSHXCR2_AWRSEQI_SHIFT)
+#define FSPI_FLSHXCR2_ARDSEQN_SHIFT	5
+#define FSPI_FLSHXCR2_ARDSEQN_MASK	(0x7 << FSPI_FLSHXCR2_ARDSEQN_SHIFT)
+#define FSPI_FLSHXCR2_ARDSEQI_SHIFT	0
+#define FSPI_FLSHXCR2_ARDSEQI_MASK	(0xF << FSPI_FLSHXCR2_ARDSEQI_SHIFT)
+
+#define FSPI_IPCR0			0xA0
+
+#define FSPI_IPCR1			0xA4
+#define FSPI_IPCR1_IPAREN_SHIFT		31
+#define FSPI_IPCR1_IPAREN_MASK		(1 << FSPI_IPCR1_IPAREN_SHIFT)
+#define FSPI_IPCR1_SEQNUM_SHIFT		24
+#define FSPI_IPCR1_SEQNUM_MASK		(0xF << FSPI_IPCR1_SEQNUM_SHIFT)
+#define FSPI_IPCR1_SEQID_SHIFT		16
+#define FSPI_IPCR1_SEQID_MASK		(0xF << FSPI_IPCR1_SEQID_SHIFT)
+#define FSPI_IPCR1_IDATSZ_SHIFT		0
+#define FSPI_IPCR1_IDATSZ_MASK		(0xFFFF << FSPI_IPCR1_IDATSZ_SHIFT)
+
+#define FSPI_IPCMD			0xB0
+#define FSPI_IPCMD_TRG_SHIFT		0
+#define FSPI_IPCMD_TRG_MASK		(1 << FSPI_IPCMD_TRG_SHIFT)
+
+#define FSPI_DLPR			0xB4
+
+#define FSPI_IPRXFCR			0xB8
+#define FSPI_IPRXFCR_CLR_SHIFT		0
+#define FSPI_IPRXFCR_CLR_MASK		(1 << FSPI_IPRXFCR_CLR_SHIFT)
+#define FSPI_IPRXFCR_DMA_EN_SHIFT	1
+#define FSPI_IPRXFCR_DMA_EN_MASK	(1 << FSPI_IPRXFCR_DMA_EN_SHIFT)
+#define FSPI_IPRXFCR_WMRK_SHIFT		2
+#define FSPI_IPRXFCR_WMRK_MASK		(0x1F << FSPI_IPRXFCR_WMRK_SHIFT)
+
+#define FSPI_IPTXFCR			0xBC
+#define FSPI_IPTXFCR_CLR_SHIFT		0
+#define FSPI_IPTXFCR_CLR_MASK		(1 << FSPI_IPTXFCR_CLR_SHIFT)
+#define FSPI_IPTXFCR_DMA_EN_SHIFT	1
+#define FSPI_IPTXFCR_DMA_EN_MASK	(1 << FSPI_IPTXFCR_DMA_EN_SHIFT)
+#define FSPI_IPTXFCR_WMRK_SHIFT		2
+#define FSPI_IPTXFCR_WMRK_MASK		(0x1F << FSPI_IPTXFCR_WMRK_SHIFT)
+
+#define	FSPI_DLLACR			0xC0
+#define	FSPI_DLLACR_OVRDEN_SHIFT	8
+#define	FSPI_DLLACR_OVRDEN_MASK		(1 << FSPI_DLLACR_OVRDEN_SHIFT)
+
+#define	FSPI_DLLBCR			0xC4
+#define	FSPI_DLLBCR_OVRDEN_SHIFT	8
+#define	FSPI_DLLBCR_OVRDEN_MASK		(1 << FSPI_DLLBCR_OVRDEN_SHIFT)
+
+#define FSPI_STS0			0xE0
+#define FSPI_STS0_DLPHA_SHIFT		9
+#define FSPI_STS0_DLPHA_MASK		(0x1F << FSPI_STS0_DLPHA_SHIFT)
+#define FSPI_STS0_DLPHB_SHIFT		4
+#define FSPI_STS0_DLPHB_MASK		(0x1F << FSPI_STS0_DLPHB_SHIFT)
+#define FSPI_STS0_CMD_SRC_SHIFT		2
+#define FSPI_STS0_CMD_SRC_MASK		(3 << FSPI_STS0_CMD_SRC_SHIFT)
+#define FSPI_STS0_ARB_IDLE_SHIFT	1
+#define FSPI_STS0_ARB_IDLE_MASK		(1 << FSPI_STS0_ARB_IDLE_SHIFT)
+#define FSPI_STS0_SEQ_IDLE_SHIFT	0
+#define FSPI_STS0_SEQ_IDLE_MASK		(1 << FSPI_STS0_SEQ_IDLE_SHIFT)
+
+#define FSPI_STS1			0xE4
+#define FSPI_STS1_IP_ERRCD_SHIFT	24
+#define FSPI_STS1_IP_ERRCD_MASK		(0xF << FSPI_STS1_IP_ERRCD_SHIFT)
+#define FSPI_STS1_IP_ERRID_SHIFT	16
+#define FSPI_STS1_IP_ERRID_MASK		(0xF << FSPI_STS1_IP_ERRID_SHIFT)
+#define FSPI_STS1_AHB_ERRCD_SHIFT	8
+#define FSPI_STS1_AHB_ERRCD_MASK	(0xF << FSPI_STS1_AHB_ERRCD_SHIFT)
+#define FSPI_STS1_AHB_ERRID_SHIFT	0
+#define FSPI_STS1_AHB_ERRID_MASK	(0xF << FSPI_STS1_AHB_ERRID_SHIFT)
+
+#define FSPI_AHBSPNST			0xEC
+#define FSPI_AHBSPNST_DATLFT_SHIFT	16
+#define FSPI_AHBSPNST_DATLFT_MASK	\
+		(0xFFFF << FSPI_AHBSPNST_DATLFT_SHIFT)
+#define FSPI_AHBSPNST_BUFID_SHIFT	1
+#define FSPI_AHBSPNST_BUFID_MASK	(7 << FSPI_AHBSPNST_BUFID_SHIFT)
+#define FSPI_AHBSPNST_ACTIVE_SHIFT	0
+#define FSPI_AHBSPNST_ACTIVE_MASK	(1 << FSPI_AHBSPNST_ACTIVE_SHIFT)
+
+#define FSPI_IPRXFSTS			0xF0
+#define FSPI_IPRXFSTS_RDCNTR_SHIFT	16
+#define FSPI_IPRXFSTS_RDCNTR_MASK	\
+		(0xFFFF << FSPI_IPRXFSTS_RDCNTR_SHIFT)
+#define FSPI_IPRXFSTS_FILL_SHIFT	0
+#define FSPI_IPRXFSTS_FILL_MASK		(0xFF << FSPI_IPRXFSTS_FILL_SHIFT)
+
+#define FSPI_IPTXFSTS			0xF4
+#define FSPI_IPTXFSTS_WRCNTR_SHIFT	16
+#define FSPI_IPTXFSTS_WRCNTR_MASK	\
+		(0xFFFF << FSPI_IPTXFSTS_WRCNTR_SHIFT)
+#define FSPI_IPTXFSTS_FILL_SHIFT	0
+#define FSPI_IPTXFSTS_FILL_MASK		(0xFF << FSPI_IPTXFSTS_FILL_SHIFT)
+
+#define FSPI_RFDR			0x100
+#define FSPI_TFDR			0x180
+
+#define FSPI_LUT_BASE			0x200
+
+/* register map end */
+
+/*
+ * The definition of the LUT register shows below:
+ *
+ *  ---------------------------------------------------
+ *  | INSTR1 | PAD1 | OPRND1 | INSTR0 | PAD0 | OPRND0 |
+ *  ---------------------------------------------------
+ */
+#define OPRND0_SHIFT		0
+#define PAD0_SHIFT		8
+#define INSTR0_SHIFT		10
+#define OPRND1_SHIFT		16
+
+/* Instruction set for the LUT register. */
+
+#define LUT_STOP		0x00
+#define LUT_CMD			0x01
+#define LUT_ADDR		0x02
+#define LUT_CADDR_SDR		0x03
+#define LUT_MODE		0x04
+#define LUT_MODE2		0x05
+#define LUT_MODE4		0x06
+#define LUT_MODE8		0x07
+#define LUT_NXP_WRITE		0x08
+#define LUT_NXP_READ		0x09
+#define LUT_LEARN_SDR		0x0A
+#define LUT_DATSZ_SDR		0x0B
+#define LUT_DUMMY		0x0C
+#define LUT_DUMMY_RWDS_SDR	0x0D
+#define LUT_JMP_ON_CS		0x1F
+#define LUT_CMD_DDR		0x21
+#define LUT_ADDR_DDR		0x22
+#define LUT_CADDR_DDR		0x23
+#define LUT_MODE_DDR		0x24
+#define LUT_MODE2_DDR		0x25
+#define LUT_MODE4_DDR		0x26
+#define LUT_MODE8_DDR		0x27
+#define LUT_WRITE_DDR		0x28
+#define LUT_READ_DDR		0x29
+#define LUT_LEARN_DDR		0x2A
+#define LUT_DATSZ_DDR		0x2B
+#define LUT_DUMMY_DDR		0x2C
+#define LUT_DUMMY_RWDS_DDR	0x2D
+
+
+/*
+ * The PAD definitions for LUT register.
+ *
+ * The pad stands for the lines number of IO[0:3].
+ * For example, the Quad read need four IO lines, so you should
+ * set LUT_PAD4 which means we use four IO lines.
+ */
+#define LUT_PAD1		0
+#define LUT_PAD2		1
+#define LUT_PAD4		2
+#define LUT_PAD8		3
+
+/* Oprands for the LUT register. */
+#define ADDR24BIT		0x18
+#define ADDR32BIT		0x20
+
+/* Macros for constructing the LUT register. */
+#define LUT0(ins, pad, opr)						\
+		(((opr) << OPRND0_SHIFT) | ((LUT_##pad) << PAD0_SHIFT) | \
+		((LUT_##ins) << INSTR0_SHIFT))
+
+#define LUT1(ins, pad, opr)	(LUT0(ins, pad, opr) << OPRND1_SHIFT)
+
+/* other macros for LUT register. */
+#define FSPI_LUT(x)		(FSPI_LUT_BASE + (x) * 4)
+#define FSPI_LUT_NUM		128
+
+/* SEQID -- we can have 32 seqids at most. */
+#define SEQID_READ		0
+#define SEQID_WREN		1
+#define SEQID_WRDI		2
+#define SEQID_RDSR		3
+#define SEQID_SE		4
+#define SEQID_CHIP_ERASE	5
+#define SEQID_PP		6
+#define SEQID_RDID		7
+#define SEQID_WRSR		8
+#define SEQID_RDCR		9
+#define SEQID_EN4B		10
+#define SEQID_BRWR		11
+#define SEQID_RD_EVCR		12
+#define SEQID_WD_EVCR		13
+#define SEQID_RDFSR		14
+
+#define FSPI_MIN_IOMAP		SZ_4M
+
+#define FSPI_RX_MAX_IPBUF_SIZE		0x200 /* 64 * 64bits  */
+#define FSPI_TX_MAX_IPBUF_SIZE		0x400 /* 128 * 64bits */
+#define FSPI_RX_MAX_AHBBUF_SIZE		0x800 /* 256 * 64bits */
+#define FSPI_TX_MAX_AHBBUF_SIZE		0x40  /* 8 * 64bits   */
+
+#define TX_IPBUF_SIZE		FSPI_TX_MAX_IPBUF_SIZE
+#define RX_IPBUF_SIZE		FSPI_RX_MAX_IPBUF_SIZE
+#define RX_AHBBUF_SIZE		FSPI_RX_MAX_AHBBUF_SIZE
+#define TX_AHBBUF_SIZE		FSPI_TX_MAX_AHBBUF_SIZE
+
+#define FSPI_SINGLE_MODE	1
+#define FSPI_OCTAL_MODE		8
+
+#define FSPINOR_OP_READ_1_1_8_4B	0x7c
+
+enum nxp_fspi_devtype {
+	NXP_FSPI_LX2160A,
+};
+
+struct nxp_fspi_devtype_data {
+	enum nxp_fspi_devtype devtype;
+	int rxfifo;
+	int txfifo;
+	int ahb_buf_size;
+	int driver_data;
+};
+
+static struct nxp_fspi_devtype_data lx2160a_data = {
+	.devtype = NXP_FSPI_LX2160A,
+	.rxfifo = RX_IPBUF_SIZE,
+	.txfifo = TX_IPBUF_SIZE,
+	.ahb_buf_size = RX_AHBBUF_SIZE,
+	.driver_data = 0,
+};
+
+#define NXP_FSPI_MAX_CHIP	4
+struct nxp_fspi {
+	struct mtd_info mtd[NXP_FSPI_MAX_CHIP];
+	struct spi_nor nor[NXP_FSPI_MAX_CHIP];
+	void __iomem *iobase;
+	void __iomem *ahb_addr;
+	u32 memmap_phy;
+	u32 memmap_offs;
+	u32 memmap_len;
+	struct clk *clk, *clk_en;
+	struct device *dev;
+	struct completion c;
+	struct nxp_fspi_devtype_data *devtype_data;
+	u32 nor_size;
+	u32 nor_num;
+	u32 clk_rate;
+	u32 spi_rx_bus_width;
+	u32 spi_tx_bus_width;
+	unsigned int chip_base_addr; /* We may support two chips. */
+	bool has_second_chip;
+	struct mutex lock;
+	struct pm_qos_request pm_qos_req;
+};
+
+static inline void nxp_fspi_unlock_lut(struct nxp_fspi *fspi)
+{
+	writel(FSPI_LUTKEY_VALUE, fspi->iobase + FSPI_LUTKEY);
+	writel(FSPI_LCKER_UNLOCK, fspi->iobase + FSPI_LCKCR);
+}
+
+static inline void nxp_fspi_lock_lut(struct nxp_fspi *fspi)
+{
+	writel(FSPI_LUTKEY_VALUE, fspi->iobase + FSPI_LUTKEY);
+	writel(FSPI_LCKER_LOCK, fspi->iobase + FSPI_LCKCR);
+}
+
+static irqreturn_t nxp_fspi_irq_handler(int irq, void *dev_id)
+{
+	struct nxp_fspi *fspi = dev_id;
+	u32 reg;
+
+	reg = readl(fspi->iobase + FSPI_INTR);
+	writel(FSPI_INTR_IPCMDDONE_MASK, fspi->iobase + FSPI_INTR);
+	if (reg & FSPI_INTR_IPCMDDONE_MASK)
+		complete(&fspi->c);
+
+	return IRQ_HANDLED;
+}
+
+static void nxp_fspi_init_lut(struct nxp_fspi *fspi)
+{
+	void __iomem *base = fspi->iobase;
+	struct spi_nor *nor = &fspi->nor[0];
+	u8 addrlen = (nor->addr_width == 3) ? ADDR24BIT : ADDR32BIT;
+	u32 lut_base;
+	u8 op, dm;
+	int i;
+
+	nxp_fspi_unlock_lut(fspi);
+
+	/* Clear all the LUT table */
+	for (i = 0; i < FSPI_LUT_NUM; i++)
+		writel(0, base + FSPI_LUT_BASE + i * 4);
+
+	/* Read */
+	lut_base = SEQID_READ * 4;
+	op = nor->read_opcode;
+	dm = nor->read_dummy;
+
+	if (fspi->spi_rx_bus_width == FSPI_OCTAL_MODE) {
+		dm = 8;
+		op = FSPINOR_OP_READ_1_1_8_4B;
+		writel(LUT0(CMD, PAD1, op) | LUT1(ADDR, PAD1, addrlen),
+				base + FSPI_LUT(lut_base));
+		writel(LUT0(DUMMY, PAD8, dm) | LUT1(NXP_READ, PAD8, 0),
+				base + FSPI_LUT(lut_base + 1));
+	} else {
+		if ((op == SPINOR_OP_READ_FAST_4B) ||
+		     (op == SPINOR_OP_READ_FAST) ||
+		     (op == SPINOR_OP_READ) ||
+		     (op == SPINOR_OP_READ_4B)) {
+			dm = 8;
+			writel(LUT0(CMD, PAD1, op) | LUT1(ADDR, PAD1, addrlen),
+					base + FSPI_LUT(lut_base));
+			writel(LUT0(DUMMY, PAD1, dm) | LUT1(NXP_READ, PAD1, 0),
+					base + FSPI_LUT(lut_base + 1));
+		} else if (nor->read_proto == SNOR_PROTO_1_4_4) {
+			dev_dbg(nor->dev, "Unsupported opcode : 0x%.2x\n", op);
+			/* TODO Add support for other Read ops. */
+		} else {
+			dev_dbg(nor->dev, "Unsupported opcode : 0x%.2x\n", op);
+		}
+	}
+
+	/* Write enable */
+	lut_base = SEQID_WREN * 4;
+	writel(LUT0(CMD, PAD1, SPINOR_OP_WREN), base + FSPI_LUT(lut_base));
+
+	/* Page Program */
+	lut_base = SEQID_PP * 4;
+	writel(LUT0(CMD, PAD1, nor->program_opcode) | LUT1(ADDR, PAD1, addrlen),
+			base + FSPI_LUT(lut_base));
+	writel(LUT0(NXP_WRITE, PAD1, 0), base + FSPI_LUT(lut_base + 1));
+
+	/* Read Status */
+	lut_base = SEQID_RDSR * 4;
+	writel(LUT0(CMD, PAD1, SPINOR_OP_RDSR) | LUT1(NXP_READ, PAD1, 0x1),
+			base + FSPI_LUT(lut_base));
+
+	/* Erase a sector */
+	lut_base = SEQID_SE * 4;
+	writel(LUT0(CMD, PAD1, nor->erase_opcode) | LUT1(ADDR, PAD1, addrlen),
+			base + FSPI_LUT(lut_base));
+
+	/* Erase the whole chip */
+	lut_base = SEQID_CHIP_ERASE * 4;
+	writel(LUT0(CMD, PAD1, SPINOR_OP_CHIP_ERASE),
+			base + FSPI_LUT(lut_base));
+
+	/* READ ID */
+	lut_base = SEQID_RDID * 4;
+	writel(LUT0(CMD, PAD1, SPINOR_OP_RDID) | LUT1(NXP_READ, PAD1, 0x8),
+			base + FSPI_LUT(lut_base));
+
+	/* Write Register */
+	lut_base = SEQID_WRSR * 4;
+	writel(LUT0(CMD, PAD1, SPINOR_OP_WRSR) | LUT1(NXP_WRITE, PAD1, 0x2),
+			base + FSPI_LUT(lut_base));
+
+	/* Read Configuration Register */
+	lut_base = SEQID_RDCR * 4;
+	writel(LUT0(CMD, PAD1, SPINOR_OP_RDCR) | LUT1(NXP_READ, PAD1, 0x1),
+			base + FSPI_LUT(lut_base));
+
+	/* Write disable */
+	lut_base = SEQID_WRDI * 4;
+	writel(LUT0(CMD, PAD1, SPINOR_OP_WRDI), base + FSPI_LUT(lut_base));
+
+	/* Enter 4 Byte Mode (Micron) */
+	lut_base = SEQID_EN4B * 4;
+	writel(LUT0(CMD, PAD1, SPINOR_OP_EN4B), base + FSPI_LUT(lut_base));
+
+	/* Enter 4 Byte Mode (Spansion) */
+	lut_base = SEQID_BRWR * 4;
+	writel(LUT0(CMD, PAD1, SPINOR_OP_BRWR), base + FSPI_LUT(lut_base));
+
+	/* Read EVCR register */
+	lut_base = SEQID_RD_EVCR * 4;
+	writel(LUT0(CMD, PAD1, SPINOR_OP_RD_EVCR),
+	       base + FSPI_LUT(lut_base));
+
+	/* Write EVCR register */
+	lut_base = SEQID_WD_EVCR * 4;
+	writel(LUT0(CMD, PAD1, SPINOR_OP_WD_EVCR),
+	       base + FSPI_LUT(lut_base));
+
+	/* Read Flag Status */
+	lut_base = SEQID_RDFSR * 4;
+	writel(LUT0(CMD, PAD1, SPINOR_OP_RDFSR) | LUT1(NXP_READ, PAD1, 0x1),
+			base + FSPI_LUT(lut_base));
+
+	nxp_fspi_lock_lut(fspi);
+}
+
+/* Get the SEQID for the command */
+static int nxp_fspi_get_seqid(struct nxp_fspi *fspi, u8 cmd)
+{
+
+	switch (cmd) {
+	case SPINOR_OP_READ_1_1_4_4B:
+	case SPINOR_OP_READ_1_1_4:
+	case SPINOR_OP_READ:
+	case SPINOR_OP_READ_4B:
+	case SPINOR_OP_READ_FAST:
+	case SPINOR_OP_READ_FAST_4B:
+		return SEQID_READ;
+	case SPINOR_OP_WREN:
+		return SEQID_WREN;
+	case SPINOR_OP_WRDI:
+		return SEQID_WRDI;
+	case SPINOR_OP_RDSR:
+		return SEQID_RDSR;
+	case SPINOR_OP_RDFSR:
+		return SEQID_RDFSR;
+	case SPINOR_OP_BE_4K:
+	case SPINOR_OP_SE:
+	case SPINOR_OP_SE_4B:
+	case SPINOR_OP_BE_4K_4B:
+		return SEQID_SE;
+	case SPINOR_OP_CHIP_ERASE:
+		return SEQID_CHIP_ERASE;
+	case SPINOR_OP_PP:
+	case SPINOR_OP_PP_4B:
+		return SEQID_PP;
+	case SPINOR_OP_RDID:
+		return SEQID_RDID;
+	case SPINOR_OP_WRSR:
+		return SEQID_WRSR;
+	case SPINOR_OP_RDCR:
+		return SEQID_RDCR;
+	case SPINOR_OP_EN4B:
+		return SEQID_EN4B;
+	case SPINOR_OP_BRWR:
+		return SEQID_BRWR;
+	case SPINOR_OP_RD_EVCR:
+		return SEQID_RD_EVCR;
+	case SPINOR_OP_WD_EVCR:
+		return SEQID_WD_EVCR;
+	default:
+		dev_err(fspi->dev, "Unsupported cmd 0x%.2x\n", cmd);
+		break;
+	}
+	return -EINVAL;
+}
+
+static int
+nxp_fspi_runcmd(struct nxp_fspi *fspi, u8 cmd, unsigned int addr, int len)
+{
+	void __iomem *base = fspi->iobase;
+	int seqid;
+	int seqnum = 0;
+	u32 reg;
+	int err;
+	int iprxfcr = 0;
+
+	iprxfcr = readl(fspi->iobase + FSPI_IPRXFCR);
+	/* invalid RXFIFO first */
+	iprxfcr &= ~FSPI_IPRXFCR_DMA_EN_MASK;
+	iprxfcr = iprxfcr | FSPI_IPRXFCR_CLR_MASK;
+	writel(iprxfcr, fspi->iobase + FSPI_IPRXFCR);
+
+	init_completion(&fspi->c);
+	dev_dbg(fspi->dev, "to 0x%.8x:0x%.8x, len:%d, cmd:%.2x\n",
+			fspi->chip_base_addr, addr, len, cmd);
+
+	/* write address */
+	writel(fspi->chip_base_addr + addr, base + FSPI_IPCR0);
+
+	seqid = nxp_fspi_get_seqid(fspi, cmd);
+
+	writel((seqnum << FSPI_IPCR1_SEQNUM_SHIFT) |
+			(seqid << FSPI_IPCR1_SEQID_SHIFT) | len,
+			base + FSPI_IPCR1);
+
+	/* wait till controller is idle */
+	do {
+		reg = readl(base + FSPI_STS0);
+		if ((reg & FSPI_STS0_ARB_IDLE_MASK) &&
+		    (reg & FSPI_STS0_SEQ_IDLE_MASK))
+			break;
+		udelay(1);
+		dev_dbg(fspi->dev, "The controller is busy, 0x%x\n", reg);
+	} while (1);
+
+	/* trigger the LUT now */
+	writel(1, base + FSPI_IPCMD);
+
+	/* Wait for the interrupt. */
+	if (!wait_for_completion_timeout(&fspi->c, msecs_to_jiffies(1000))) {
+		dev_err(fspi->dev,
+			"cmd 0x%.2x timeout, addr@%.8x, Status0:0x%.8x, Status1:0x%.8x\n",
+			cmd, addr, readl(base + FSPI_STS0),
+			readl(base + FSPI_STS1));
+		err = -ETIMEDOUT;
+	} else {
+		err = 0;
+		dev_dbg(fspi->dev, "FSPI Intr done,INTR:<0x%.8x>\n",
+			 readl(base + FSPI_INTR));
+	}
+
+	return err;
+}
+
+/* Read out the data from the FSPI_RBDR buffer registers. */
+static void nxp_fspi_read_data(struct nxp_fspi *fspi, int len, u8 *rxbuf)
+{
+	int i = 0, j = 0, tmp_size = 0;
+	int size;
+	u32 tmp = 0;
+
+	while (len > 0) {
+
+		size = len / 8;
+
+		for (i = 0; i < size; ++i) {
+			/* Wait for RXFIFO available*/
+			while (!(readl(fspi->iobase + FSPI_INTR)
+				 & FSPI_INTR_IPRXWA_MASK))
+				;
+
+			j = 0;
+			tmp_size = 8;
+			while (tmp_size > 0) {
+				tmp = 0;
+				tmp = readl(fspi->iobase + FSPI_RFDR + j * 4);
+				memcpy(rxbuf, &tmp, 4);
+				tmp_size -= 4;
+				j++;
+				rxbuf += 4;
+			}
+
+			/* move the FIFO pointer */
+			writel(FSPI_INTR_IPRXWA_MASK,
+			       fspi->iobase + FSPI_INTR);
+			len -= 8;
+		}
+
+		size = len % 8;
+
+		j = 0;
+		if (size) {
+			/* Wait for RXFIFO available*/
+			while (!(readl(fspi->iobase + FSPI_INTR)
+				 & FSPI_INTR_IPRXWA_MASK))
+				;
+
+			while (len > 0) {
+				tmp = 0;
+				size = (len < 4) ? len : 4;
+				tmp = readl(fspi->iobase + FSPI_RFDR + j * 4);
+				memcpy(rxbuf, &tmp, size);
+				len -= size;
+				j++;
+				rxbuf += size;
+			}
+		}
+
+		/* invalid the RXFIFO */
+		writel(FSPI_IPRXFCR_CLR_MASK,
+		       fspi->iobase + FSPI_IPRXFCR);
+
+		writel(FSPI_INTR_IPRXWA_MASK,
+		       fspi->iobase + FSPI_INTR);
+	}
+}
+
+static inline void nxp_fspi_invalid(struct nxp_fspi *fspi)
+{
+	u32 reg;
+
+	reg = readl(fspi->iobase + FSPI_MCR0);
+	writel(reg | FSPI_MCR0_SWRST_MASK, fspi->iobase + FSPI_MCR0);
+
+	/*
+	 * The minimum delay : 1 AHB + 2 SFCK clocks.
+	 * Delay 1 us is enough.
+	 */
+	while (readl(fspi->iobase + FSPI_MCR0) & FSPI_MCR0_SWRST_MASK)
+		;
+}
+
+static ssize_t nxp_fspi_nor_write(struct nxp_fspi *fspi,
+				     struct spi_nor *nor, u8 opcode,
+				     unsigned int to, u32 *txbuf,
+				     unsigned int count)
+{
+	int ret, i, j;
+	int size, tmp_size;
+	u32 data = 0;
+
+	dev_dbg(fspi->dev, "nor write to 0x%.8x:0x%.8x, len : %d\n",
+		fspi->chip_base_addr, to, count);
+
+	/* clear the TX FIFO. */
+	writel(FSPI_IPTXFCR_CLR_MASK, fspi->iobase + FSPI_IPTXFCR);
+
+	size = count / 8;
+	for (i = 0; i < size; i++) {
+		/* Wait for TXFIFO empty*/
+		while (!(readl(fspi->iobase + FSPI_INTR)
+			 & FSPI_INTR_IPTXWE_MASK))
+			;
+		j = 0;
+		tmp_size = 8;
+		while (tmp_size > 0) {
+			data = 0;
+			memcpy(&data, txbuf, 4);
+			writel(data, fspi->iobase + FSPI_TFDR + j * 4);
+			tmp_size -= 4;
+			j++;
+			txbuf += 1;
+		}
+
+		writel(FSPI_INTR_IPTXWE_MASK, fspi->iobase + FSPI_INTR);
+	}
+
+	size = count % 8;
+	if (size) {
+		/* Wait for TXFIFO empty*/
+		while (!(readl(fspi->iobase + FSPI_INTR)
+			 & FSPI_INTR_IPTXWE_MASK))
+			;
+
+		j = 0;
+		tmp_size = 0;
+		while (size > 0) {
+			data = 0;
+			tmp_size = (size < 4) ? size : 4;
+			memcpy(&data, txbuf, tmp_size);
+			writel(data, fspi->iobase + FSPI_TFDR + j * 4);
+			size -= tmp_size;
+			j++;
+			txbuf += 1;
+		}
+
+		writel(FSPI_INTR_IPTXWE_MASK, fspi->iobase + FSPI_INTR);
+	}
+
+	/* Trigger it */
+	ret = nxp_fspi_runcmd(fspi, opcode, to, count);
+
+	if (ret == 0)
+		return count;
+
+	return ret;
+}
+
+static void nxp_fspi_set_map_addr(struct nxp_fspi *fspi)
+{
+	int nor_size = fspi->nor_size >> 10;
+	void __iomem *base = fspi->iobase;
+
+	/*
+	 * Supporting same flash device as slaves on different chip-select.
+	 * As SAMEDEVICEEN bit set, by default, in mcr2 reg then need not to
+	 * configure FLSHA2CRx/FLSHB1CRx/FLSHB2CRx register as setting for
+	 * these would be ignored.
+	 * Need to Reset SAMEDEVICEEN bit in mcr2 reg, when require to add
+	 * support for different flashes.
+	 */
+	writel(nor_size, base + FSPI_FLSHA1CR0);
+	writel(0, base + FSPI_FLSHA2CR0);
+	writel(0, base + FSPI_FLSHB1CR0);
+	writel(0, base + FSPI_FLSHB2CR0);
+}
+
+static void nxp_fspi_init_ahb_read(struct nxp_fspi *fspi)
+{
+	void __iomem *base = fspi->iobase;
+	struct spi_nor *nor = &fspi->nor[0];
+	int i = 0;
+	int seqid;
+
+	/* AHB configuration for access buffer 0~7. */
+	for (i = 0; i < 7; i++)
+		writel(0, base + FSPI_AHBRX_BUF0CR0 + 4 * i);
+
+	/*
+	 * Set ADATSZ with the maximum AHB buffer size to improve the read
+	 * performance.
+	 */
+	writel((fspi->devtype_data->ahb_buf_size / 8 |
+		FSPI_AHBRXBUF0CR7_PREF_MASK), base + FSPI_AHBRX_BUF7CR0);
+
+	/* prefetch and no start address alignment limitation */
+	writel(FSPI_AHBCR_PREF_EN_MASK | FSPI_AHBCR_RDADDROPT_MASK,
+		    base + FSPI_AHBCR);
+
+
+	/* Set the default lut sequence for AHB Read. */
+	seqid = nxp_fspi_get_seqid(fspi, nor->read_opcode);
+	writel(seqid, base + FSPI_FLSHA1CR2);
+}
+
+/* This function was used to prepare and enable FSPI clock */
+static int nxp_fspi_clk_prep_enable(struct nxp_fspi *fspi)
+{
+	int ret;
+
+	ret = clk_prepare_enable(fspi->clk_en);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(fspi->clk);
+	if (ret) {
+		clk_disable_unprepare(fspi->clk_en);
+		return ret;
+	}
+
+	return 0;
+}
+
+/* This function was used to disable and unprepare FSPI clock */
+static void nxp_fspi_clk_disable_unprep(struct nxp_fspi *fspi)
+{
+	clk_disable_unprepare(fspi->clk);
+	clk_disable_unprepare(fspi->clk_en);
+}
+
+/* We use this function to do some basic init for spi_nor_scan(). */
+static int nxp_fspi_nor_setup(struct nxp_fspi *fspi)
+{
+	void __iomem *base = fspi->iobase;
+	u32 reg;
+
+	/* Reset the module */
+	writel(FSPI_MCR0_SWRST_MASK, base + FSPI_MCR0);
+	do {
+		udelay(1);
+	} while (0x1 & readl(base + FSPI_MCR0));
+
+	/* Disable the module */
+	writel(FSPI_MCR0_MDIS_MASK, base + FSPI_MCR0);
+
+	/* Reset the DLL register to default value */
+	writel(FSPI_DLLACR_OVRDEN_MASK, base + FSPI_DLLACR);
+	writel(FSPI_DLLBCR_OVRDEN_MASK, base + FSPI_DLLBCR);
+
+	/* enable module */
+	writel(FSPI_MCR0_AHB_TIMEOUT_MASK | FSPI_MCR0_IP_TIMEOUT_MASK,
+	       base + FSPI_MCR0);
+
+	/* Read the register value */
+	reg = readl(base + FSPI_MCR0);
+
+	/* Init the LUT table. */
+	nxp_fspi_init_lut(fspi);
+
+	/* enable the interrupt */
+	writel(FSPI_INTEN_IPCMDDONE_MASK, fspi->iobase + FSPI_INTEN);
+	return 0;
+}
+
+static int nxp_fspi_nor_setup_last(struct nxp_fspi *fspi)
+{
+	unsigned long rate = fspi->clk_rate;
+	int ret;
+
+	/* disable and unprepare clock to avoid glitch pass to controller */
+	nxp_fspi_clk_disable_unprep(fspi);
+
+	ret = clk_set_rate(fspi->clk, rate);
+	if (ret)
+		return ret;
+
+	ret = nxp_fspi_clk_prep_enable(fspi);
+	if (ret)
+		return ret;
+
+	/* Init the LUT table again. */
+	nxp_fspi_init_lut(fspi);
+
+	/* Init for AHB read */
+	nxp_fspi_init_ahb_read(fspi);
+
+	return 0;
+}
+
+static void nxp_fspi_set_base_addr(struct nxp_fspi *fspi,
+				      struct spi_nor *nor)
+{
+	fspi->chip_base_addr = fspi->nor_size * (nor - fspi->nor);
+}
+
+static int nxp_fspi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
+				int len)
+{
+	int ret;
+	struct nxp_fspi *fspi = nor->priv;
+
+	ret = nxp_fspi_runcmd(fspi, opcode, 0, len);
+	if (ret)
+		return ret;
+
+	nxp_fspi_read_data(fspi, len, buf);
+	return 0;
+}
+
+static int nxp_fspi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
+				 int len)
+{
+	struct nxp_fspi *fspi = nor->priv;
+	int ret;
+
+	if (!buf) {
+		ret = nxp_fspi_runcmd(fspi, opcode, 0, 1);
+		if (ret)
+			return ret;
+
+		if (opcode == SPINOR_OP_CHIP_ERASE)
+			nxp_fspi_invalid(fspi);
+
+	} else if (len > 0) {
+		ret = nxp_fspi_nor_write(fspi, nor, opcode, 0,
+					(u32 *)buf, len);
+	} else {
+		dev_err(fspi->dev, "invalid cmd %d\n", opcode);
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static ssize_t nxp_fspi_write(struct spi_nor *nor, loff_t to,
+		size_t len, const u_char *buf)
+{
+	struct nxp_fspi *fspi = nor->priv;
+	ssize_t tx_size = 0, act_wrt = 0, ret = 0;
+
+	while (len > 0) {
+		tx_size = (len > TX_IPBUF_SIZE) ? TX_IPBUF_SIZE : len;
+
+		act_wrt = nxp_fspi_nor_write(fspi, nor, nor->program_opcode, to,
+					(u32 *)buf, tx_size);
+		len -= tx_size;
+		to  += tx_size;
+		ret += act_wrt;
+	}
+
+	/* invalid the data in the AHB buffer. */
+	nxp_fspi_invalid(fspi);
+	return ret;
+}
+
+static ssize_t nxp_fspi_read(struct spi_nor *nor, loff_t from,
+		size_t len, u_char *buf)
+{
+	struct nxp_fspi *fspi = nor->priv;
+
+	/* if necessary, ioremap buffer before AHB read, */
+	if (!fspi->ahb_addr) {
+		fspi->memmap_offs = fspi->chip_base_addr + from;
+		fspi->memmap_len = len > FSPI_MIN_IOMAP ?
+				   len : FSPI_MIN_IOMAP;
+
+		fspi->ahb_addr = ioremap_nocache(
+					fspi->memmap_phy + fspi->memmap_offs,
+					fspi->memmap_len);
+		if (!fspi->ahb_addr) {
+			dev_err(fspi->dev, "ioremap failed\n");
+			return -ENOMEM;
+		}
+	/* ioremap if the data requested is out of range */
+	} else if (fspi->chip_base_addr + from < fspi->memmap_offs
+			|| fspi->chip_base_addr + from + len >
+			fspi->memmap_offs + fspi->memmap_len) {
+		iounmap(fspi->ahb_addr);
+
+		fspi->memmap_offs = fspi->chip_base_addr + from;
+		fspi->memmap_len = len > FSPI_MIN_IOMAP ?
+				   len : FSPI_MIN_IOMAP;
+		fspi->ahb_addr = ioremap_nocache(
+					fspi->memmap_phy + fspi->memmap_offs,
+					fspi->memmap_len);
+		if (!fspi->ahb_addr) {
+			dev_err(fspi->dev, "ioremap failed\n");
+			return -ENOMEM;
+		}
+	}
+
+	dev_dbg(fspi->dev, "cmd [%x],read from %p, len:%zd\n",
+		nor->read_opcode, fspi->ahb_addr + fspi->chip_base_addr
+		+ from - fspi->memmap_offs, len);
+
+	/* Read out the data directly from the AHB buffer.*/
+	memcpy_toio(buf, fspi->ahb_addr + fspi->chip_base_addr
+		+ from - fspi->memmap_offs, len);
+
+	return len;
+}
+
+static int nxp_fspi_erase(struct spi_nor *nor, loff_t offs)
+{
+	struct nxp_fspi *fspi = nor->priv;
+	int ret;
+
+	dev_dbg(nor->dev, "%dKiB at 0x%08x:0x%08x\n",
+		nor->mtd.erasesize / 1024, fspi->chip_base_addr, (u32)offs);
+
+	ret = nxp_fspi_runcmd(fspi, nor->erase_opcode, offs, 0);
+	if (ret)
+		return ret;
+
+	nxp_fspi_invalid(fspi);
+	return 0;
+}
+
+static int nxp_fspi_prep(struct spi_nor *nor, enum spi_nor_ops ops)
+{
+	struct nxp_fspi *fspi = nor->priv;
+	int ret;
+
+	mutex_lock(&fspi->lock);
+
+	ret = nxp_fspi_clk_prep_enable(fspi);
+	if (ret)
+		goto err_mutex;
+
+	nxp_fspi_set_base_addr(fspi, nor);
+	return 0;
+
+err_mutex:
+	mutex_unlock(&fspi->lock);
+	return ret;
+}
+
+static void nxp_fspi_unprep(struct spi_nor *nor, enum spi_nor_ops ops)
+{
+	struct nxp_fspi *fspi = nor->priv;
+
+	nxp_fspi_clk_disable_unprep(fspi);
+	mutex_unlock(&fspi->lock);
+}
+
+static const struct of_device_id nxp_fspi_dt_ids[] = {
+	{ .compatible = "nxp,lx2160a-fspi", .data = (void *)&lx2160a_data, },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, nxp_fspi_dt_ids);
+
+static int nxp_fspi_probe(struct platform_device *pdev)
+{
+	struct spi_nor_hwcaps hwcaps = {
+		.mask = SPINOR_OP_READ_FAST_4B |
+			SPINOR_OP_READ_4B |
+			SNOR_HWCAPS_PP
+	};
+	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	struct nxp_fspi *fspi;
+	struct resource *res;
+	struct spi_nor *nor;
+	struct mtd_info *mtd;
+	int ret, i = 0;
+	int find_node = 0;
+
+	const struct of_device_id *of_id =
+			of_match_device(nxp_fspi_dt_ids, &pdev->dev);
+
+	fspi = devm_kzalloc(dev, sizeof(*fspi), GFP_KERNEL);
+	if (!fspi)
+		return -ENOMEM;
+
+	fspi->nor_num = of_get_child_count(dev->of_node);
+	if (!fspi->nor_num || fspi->nor_num > 4)
+		return -ENODEV;
+
+	fspi->dev = dev;
+	fspi->devtype_data = (struct nxp_fspi_devtype_data *)of_id->data;
+	platform_set_drvdata(pdev, fspi);
+
+	/* find the resources */
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "FSPI");
+	if (!res) {
+		dev_err(dev, "FSPI get resource IORESOURCE_MEM failed\n");
+		return -ENODEV;
+	}
+
+	fspi->iobase = devm_ioremap_resource(dev, res);
+	if (IS_ERR(fspi->iobase))
+		return PTR_ERR(fspi->iobase);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+					   "FSPI-memory");
+	if (!res) {
+		dev_err(dev,
+			"FSPI-memory get resource IORESOURCE_MEM failed\n");
+		return -ENODEV;
+	}
+
+	if (!devm_request_mem_region(dev, res->start, resource_size(res),
+				     res->name)) {
+		dev_err(dev, "can't request region for resource %pR\n", res);
+		return -EBUSY;
+	}
+
+	fspi->memmap_phy = res->start;
+
+	/* find the clocks */
+	fspi->clk_en = devm_clk_get(dev, "fspi_en");
+	if (IS_ERR(fspi->clk_en))
+		return PTR_ERR(fspi->clk_en);
+
+	fspi->clk = devm_clk_get(dev, "fspi");
+	if (IS_ERR(fspi->clk))
+		return PTR_ERR(fspi->clk);
+
+	ret = nxp_fspi_clk_prep_enable(fspi);
+	if (ret) {
+		dev_err(dev, "can not enable the clock\n");
+		goto clk_failed;
+	}
+
+	/* find the irq */
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0) {
+		dev_err(dev, "failed to get the irq: %d\n", ret);
+		goto irq_failed;
+	}
+
+	ret = devm_request_irq(dev, ret,
+			nxp_fspi_irq_handler, 0, pdev->name, fspi);
+	if (ret) {
+		dev_err(dev, "failed to request irq: %d\n", ret);
+		goto irq_failed;
+	}
+
+	ret = nxp_fspi_nor_setup(fspi);
+	if (ret)
+		goto irq_failed;
+
+	if (of_get_property(np, "nxp,fspi-has-second-chip", NULL))
+		fspi->has_second_chip = true;
+
+	mutex_init(&fspi->lock);
+
+	find_node = 0;
+	/* iterate the subnodes. */
+	for_each_available_child_of_node(dev->of_node, np) {
+		/* skip the holes */
+		if (!fspi->has_second_chip)
+			i *= 2;
+
+		nor = &fspi->nor[i];
+		mtd = &nor->mtd;
+
+		nor->dev = dev;
+		spi_nor_set_flash_node(nor, np);
+		nor->priv = fspi;
+
+		/* fill the hooks */
+		nor->read_reg = nxp_fspi_read_reg;
+		nor->write_reg = nxp_fspi_write_reg;
+		nor->read = nxp_fspi_read;
+		nor->write = nxp_fspi_write;
+		nor->erase = nxp_fspi_erase;
+
+		nor->prepare = nxp_fspi_prep;
+		nor->unprepare = nxp_fspi_unprep;
+
+		ret = of_property_read_u32(np, "spi-max-frequency",
+				&fspi->clk_rate);
+		if (ret < 0)
+			goto next_node;
+
+		/* set the chip address for READID */
+		nxp_fspi_set_base_addr(fspi, nor);
+
+		ret = of_property_read_u32(np, "spi-rx-bus-width",
+				&fspi->spi_rx_bus_width);
+		if (ret < 0)
+			fspi->spi_rx_bus_width = FSPI_SINGLE_MODE;
+
+		ret = of_property_read_u32(np, "spi-tx-bus-width",
+				&fspi->spi_tx_bus_width);
+		if (ret < 0)
+			fspi->spi_tx_bus_width = FSPI_SINGLE_MODE;
+
+		ret = spi_nor_scan(nor, NULL, &hwcaps);
+		if (ret)
+			goto next_node;
+
+		ret = mtd_device_register(mtd, NULL, 0);
+		if (ret)
+			goto next_node;
+
+		/* Set the correct NOR size now. */
+		if (fspi->nor_size == 0) {
+			fspi->nor_size = mtd->size;
+
+			/* Map the SPI NOR to accessiable address */
+			nxp_fspi_set_map_addr(fspi);
+		}
+
+		/*
+		 * The write is working in the  unit of the TX FIFO,
+		 * not in the unit of the SPI NOR's page size.
+		 *
+		 * So shrink the spi_nor->page_size if it is larger then the
+		 * TX FIFO.
+		 */
+		if (nor->page_size > fspi->devtype_data->txfifo)
+			nor->page_size = fspi->devtype_data->txfifo;
+
+		find_node++;
+next_node:
+		i++;
+	}
+
+	if (find_node == 0)
+		goto mutex_failed;
+
+	/* finish the rest init. */
+	ret = nxp_fspi_nor_setup_last(fspi);
+	if (ret)
+		goto last_init_failed;
+
+	nxp_fspi_clk_disable_unprep(fspi);
+	return 0;
+
+last_init_failed:
+	for (i = 0; i < fspi->nor_num; i++) {
+		/* skip the holes */
+		if (!fspi->has_second_chip)
+			i *= 2;
+		mtd_device_unregister(&fspi->mtd[i]);
+	}
+mutex_failed:
+	mutex_destroy(&fspi->lock);
+irq_failed:
+	nxp_fspi_clk_disable_unprep(fspi);
+clk_failed:
+	dev_err(dev, "NXP FSPI probe failed\n");
+	return ret;
+}
+
+static int nxp_fspi_remove(struct platform_device *pdev)
+{
+	struct nxp_fspi *fspi = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < fspi->nor_num; i++) {
+		/* skip the holes */
+		if (!fspi->has_second_chip)
+			i *= 2;
+		mtd_device_unregister(&fspi->nor[i].mtd);
+	}
+
+	/* disable the hardware */
+	writel(FSPI_MCR0_MDIS_MASK, fspi->iobase + FSPI_MCR0);
+
+	mutex_destroy(&fspi->lock);
+
+	if (fspi->ahb_addr)
+		iounmap(fspi->ahb_addr);
+
+	return 0;
+}
+
+static int nxp_fspi_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	return 0;
+}
+
+static int nxp_fspi_resume(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static struct platform_driver nxp_fspi_driver = {
+	.driver = {
+		.name	= "nxp-fspi",
+		.bus	= &platform_bus_type,
+		.of_match_table = nxp_fspi_dt_ids,
+	},
+	.probe          = nxp_fspi_probe,
+	.remove		= nxp_fspi_remove,
+	.suspend	= nxp_fspi_suspend,
+	.resume		= nxp_fspi_resume,
+};
+module_platform_driver(nxp_fspi_driver);
+
+MODULE_DESCRIPTION("NXP FSPI Controller Driver");
+MODULE_AUTHOR("NXP Semiconductor");
+MODULE_LICENSE("GPL v2");
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -271,6 +271,7 @@ static inline int set_4byte(struct spi_n
 	u8 cmd;
 
 	switch (JEDEC_MFR(info)) {
+	case SNOR_MFR_ST:
 	case SNOR_MFR_MICRON:
 		/* Some Micron need WREN command; all will accept it */
 		need_wren = true;
@@ -1054,7 +1055,7 @@ static const struct flash_info spi_nor_i
 	{ "mx66l1g45g",  INFO(0xc2201b, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 	{ "mx66l1g55g",  INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
 
-	/* Micron */
+	/* Micron <--> ST Micro */
 	{ "n25q016a",	 INFO(0x20bb15, 0, 64 * 1024,   32, SECT_4K | SPI_NOR_QUAD_READ) },
 	{ "n25q032",	 INFO(0x20ba16, 0, 64 * 1024,   64, SPI_NOR_QUAD_READ) },
 	{ "n25q032a",	 INFO(0x20bb16, 0, 64 * 1024,   64, SPI_NOR_QUAD_READ) },
@@ -1069,6 +1070,12 @@ static const struct flash_info spi_nor_i
 	{ "n25q00",      INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
 	{ "n25q00a",     INFO(0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
 
+	/* Micron */
+	{
+		"mt35xu512aba", INFO(0x2c5b1a, 0, 128 * 1024, 512,
+			SECT_4K | USE_FSR | SPI_NOR_4B_OPCODES)
+	},
+
 	/* PMC */
 	{ "pm25lv512",   INFO(0,        0, 32 * 1024,    2, SECT_4K_PMC) },
 	{ "pm25lv010",   INFO(0,        0, 32 * 1024,    4, SECT_4K_PMC) },
@@ -2446,6 +2453,7 @@ static int spi_nor_init_params(struct sp
 			params->quad_enable = macronix_quad_enable;
 			break;
 
+		case SNOR_MFR_ST:
 		case SNOR_MFR_MICRON:
 			break;
 
@@ -2773,7 +2781,8 @@ int spi_nor_scan(struct spi_nor *nor, co
 	mtd->_read = spi_nor_read;
 
 	/* NOR protection support for STmicro/Micron chips and similar */
-	if (JEDEC_MFR(info) == SNOR_MFR_MICRON ||
+	if (JEDEC_MFR(info) == SNOR_MFR_ST ||
+	    JEDEC_MFR(info) == SNOR_MFR_MICRON ||
 	    JEDEC_MFR(info) == SNOR_MFR_WINBOND ||
 	    info->flags & SPI_NOR_HAS_LOCK) {
 		nor->flash_lock = stm_lock;
--- a/include/linux/mtd/cfi.h
+++ b/include/linux/mtd/cfi.h
@@ -377,6 +377,7 @@ struct cfi_fixup {
 #define CFI_MFR_SHARP		0x00B0
 #define CFI_MFR_SST		0x00BF
 #define CFI_MFR_ST		0x0020 /* STMicroelectronics */
+#define CFI_MFR_MICRON		0x002C /* Micron */
 #define CFI_MFR_TOSHIBA		0x0098
 #define CFI_MFR_WINBOND		0x00DA
 
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -23,7 +23,8 @@
 #define SNOR_MFR_ATMEL		CFI_MFR_ATMEL
 #define SNOR_MFR_GIGADEVICE	0xc8
 #define SNOR_MFR_INTEL		CFI_MFR_INTEL
-#define SNOR_MFR_MICRON		CFI_MFR_ST /* ST Micro <--> Micron */
+#define SNOR_MFR_ST		CFI_MFR_ST	/* ST Micro */
+#define SNOR_MFR_MICRON		CFI_MFR_MICRON	/* Micron */
 #define SNOR_MFR_MACRONIX	CFI_MFR_MACRONIX
 #define SNOR_MFR_SPANSION	CFI_MFR_AMD
 #define SNOR_MFR_SST		CFI_MFR_SST