ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-25 16:31:13 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
c39c8da242
openwrt/target/linux/bcm27xx/image/Makefile

213 lines
6.6 KiB
Makefile
Raw Normal View History

target: use SPDX license identifiers on Makefiles Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-10 13:52:34 +00:00
# SPDX-License-Identifier: GPL-2.0-only
#
brcm2708: switch to linux-firmware SDIO NVRAM Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-07-13 11:30:57 +00:00
# Copyright (C) 2012-2019 OpenWrt.org
brcm2708: bcm2709: add support for Raspberry Pi 3 This adds support for Raspberry Pi 3 on the bcm2709 subtarget, in order to keep 32 bit image support when 64 bit support is added on bcm2710 subtarget. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-02-07 23:31:09 +00:00
# Copyright (C) 2016-2017 LEDE project
target: use SPDX license identifiers on Makefiles Use SPDX license tags to allow machines to check licenses. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-10 13:52:34 +00:00
adds target used by rapsberry pi Add support for Raspberry Pi / brcm2708 / 2835 Signed-off-by: Ian Ridge <ianridge [at] gmail.com> SVN-Revision: 32825
2012-07-24 20:39:17 +00:00
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
FAT32_BLOCK_SIZE=1024
brcm2708: boot-part feature integration This patch adds the boot-part feature which enables the brcm2708 target move from the custom boot partition size config option to the generic CONFIG_TARGET_KERNEL_PARTSIZE. Note: For people using custom images: Just like with CONFIG_TARGET_ROOTFS_PARTSIZE changing the value can cause sysupgrade to repartition the device! Make sure to have a backup in this case. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-12-27 20:56:28 +00:00
FAT32_BLOCKS=$(shell echo $$(($(CONFIG_TARGET_KERNEL_PARTSIZE)*1024*1024/$(FAT32_BLOCK_SIZE))))
adds target used by rapsberry pi Add support for Raspberry Pi / brcm2708 / 2835 Signed-off-by: Ian Ridge <ianridge [at] gmail.com> SVN-Revision: 32825
2012-07-24 20:39:17 +00:00
brcm2708: fix image generation with imagebuilder COPYING is not present in $(LINUX_DIR) on imagebuilder and prevents a successful image creation. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-10-13 17:01:41 +00:00
define Build/Compile
$(CP) $(LINUX_DIR)/COPYING $(KDIR)/COPYING.linux
endef
brcm2708: add DT support Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 46344
2015-07-14 07:37:29 +00:00
### Image scripts ###
brcm2708: Add Raspberry Pi 4 support - Support added to bcm2709 subtarget (32 bit). - 64 bit kernel still requires many hacks on RPi 4B. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-07-13 11:33:44 +00:00
define Build/boot-common
bcm27xx: use PARTUUID for root in cmdline This allows booting from USB/NVME while keeping SD compatibility. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-01-30 20:30:20 +00:00
echo $(IMG_PART_SIGNATURE) > $@-partuuid.txt
sed \
-e 's#@ROOT@#PARTUUID=$(IMG_PART_SIGNATURE)-02#g' \
cmdline.txt > $@-cmdline.txt
brcm2708: add DT support Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 46344
2015-07-14 07:37:29 +00:00
rm -f $@.boot
bcm27xx: label to boot partition Get fat partition name allow easy partition identification for user. Signed-off-by: Andrey Kunitsyn <blackicebox@gmail.com>
2020-05-09 11:39:51 +00:00
mkfs.fat -n boot -C $@.boot $(FAT32_BLOCKS)
brcm2708: fix image generation with imagebuilder COPYING is not present in $(LINUX_DIR) on imagebuilder and prevents a successful image creation. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-10-13 17:01:41 +00:00
mcopy -i $@.boot $(KDIR)/COPYING.linux ::
brcm2708: add DT support Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 46344
2015-07-14 07:37:29 +00:00
mcopy -i $@.boot $(KDIR)/LICENCE.broadcom ::
bcm27xx: use PARTUUID for root in cmdline This allows booting from USB/NVME while keeping SD compatibility. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-01-30 20:30:20 +00:00
mcopy -i $@.boot $@-cmdline.txt ::cmdline.txt
brcm2708: bcm2711: remove custom config file Forcing arm_64bit is no longer required with latest firmware. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-09-04 16:11:25 +00:00
mcopy -i $@.boot config.txt ::
brcm2708: restore UART on RPi 0W, 3B, 3B+ and 4B Disable Bluetooth and restore UART to GPIOs 14 & 15. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-09-03 11:01:50 +00:00
mcopy -i $@.boot distroconfig.txt ::
bcm27xx: use PARTUUID for root in cmdline This allows booting from USB/NVME while keeping SD compatibility. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-01-30 20:30:20 +00:00
mcopy -i $@.boot $@-partuuid.txt ::partuuid.txt
brcm2708: bcm2710: add 64 bit support for Raspberry Pi 3 64 bit support for Raspberry Pi 3 is experimental. However, bcm2709 subtarget should serve as a stable and compatible 32 bit support. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-02-07 23:38:21 +00:00
mcopy -i $@.boot $(IMAGE_KERNEL) ::$(KERNEL_IMG)
brcm2708: fix multi-device image generation Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 47610
2015-11-24 18:27:43 +00:00
$(foreach dts,$(shell echo $(DEVICE_DTS)),mcopy -i $@.boot $(DTS_DIR)/$(dts).dtb ::;)
brcm2708: use mmd for overlays subdirectory Fixes https://dev.openwrt.org/ticket/20704 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 47171
2015-10-11 16:23:18 +00:00
mmd -i $@.boot ::/overlays
brcm2708: update to latest version As usual these patches were extracted from the raspberry pi repo: https://github.com/raspberrypi/linux/commits/rpi-4.4.y Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-04-07 19:25:10 +00:00
mcopy -i $@.boot $(DTS_DIR)/overlays/*.dtbo ::/overlays/
brcm2708: copy overlays README to boot partition Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 47260
2015-10-26 09:01:21 +00:00
mcopy -i $@.boot $(DTS_DIR)/overlays/README ::/overlays/
brcm2708: add DT support Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 46344
2015-07-14 07:37:29 +00:00
endef
brcm2708: Add Raspberry Pi 4 support - Support added to bcm2709 subtarget (32 bit). - 64 bit kernel still requires many hacks on RPi 4B. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-07-13 11:33:44 +00:00
define Build/boot-2708
brcm2708: bcm2711: remove unneeded boot file bootcode.bin isn't needed for RPi 4B since it's stored on a SPI-attached EEPROM. More info: https://www.raspberrypi.org/documentation/hardware/raspberrypi/booteeprom.md Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-08-09 05:37:51 +00:00
mcopy -i $@.boot $(KDIR)/bootcode.bin ::
brcm2708: Add Raspberry Pi 4 support - Support added to bcm2709 subtarget (32 bit). - 64 bit kernel still requires many hacks on RPi 4B. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-07-13 11:33:44 +00:00
mcopy -i $@.boot $(KDIR)/start.elf ::
mcopy -i $@.boot $(KDIR)/start_cd.elf ::
mcopy -i $@.boot $(KDIR)/start_x.elf ::
mcopy -i $@.boot $(KDIR)/fixup.dat ::
mcopy -i $@.boot $(KDIR)/fixup_cd.dat ::
mcopy -i $@.boot $(KDIR)/fixup_x.dat ::
endef
brcm2708: add bcm2711 subtarget (RPi 4B aarch64) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-08-02 18:35:59 +00:00
define Build/boot-2711
brcm2708: Add Raspberry Pi 4 support - Support added to bcm2709 subtarget (32 bit). - 64 bit kernel still requires many hacks on RPi 4B. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-07-13 11:33:44 +00:00
mcopy -i $@.boot $(KDIR)/start4.elf ::
mcopy -i $@.boot $(KDIR)/start4cd.elf ::
mcopy -i $@.boot $(KDIR)/start4x.elf ::
mcopy -i $@.boot $(KDIR)/fixup4.dat ::
mcopy -i $@.boot $(KDIR)/fixup4cd.dat ::
mcopy -i $@.boot $(KDIR)/fixup4x.dat ::
endef
brcm2708: add DT support Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 46344
2015-07-14 07:37:29 +00:00
define Build/sdcard-img
bcm27xx: pass signature to partition generation Passes IMG_PART_SIGNATURE to ptgen instead of using the default "OWRT" signature. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-01-30 20:28:54 +00:00
SIGNATURE="$(IMG_PART_SIGNATURE)" \
image: add a helper variable for getting kernel/rootfs from within image Build/* templates Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-30 12:19:11 +00:00
./gen_rpi_sdcard_img.sh $@ $@.boot $(IMAGE_ROOTFS) \
brcm2708: boot-part feature integration This patch adds the boot-part feature which enables the brcm2708 target move from the custom boot partition size config option to the generic CONFIG_TARGET_KERNEL_PARTSIZE. Note: For people using custom images: Just like with CONFIG_TARGET_ROOTFS_PARTSIZE changing the value can cause sysupgrade to repartition the device! Make sure to have a backup in this case. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-12-27 20:56:28 +00:00
$(CONFIG_TARGET_KERNEL_PARTSIZE) $(CONFIG_TARGET_ROOTFS_PARTSIZE)
adds target used by rapsberry pi Add support for Raspberry Pi / brcm2708 / 2835 Signed-off-by: Ian Ridge <ianridge [at] gmail.com> SVN-Revision: 32825
2012-07-24 20:39:17 +00:00
endef
brcm2708: convert to the new building system Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-12 17:49:20 +00:00
### Devices ###
brcm2708: add DT support Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 46344
2015-07-14 07:37:29 +00:00
define Device/Default
brcm2708: split up DEVICE_TITLE Splits up DEVICE_TITLE into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. Fixes https://github.com/openwrt/openwrt/pull/2245 Signed-off-by: Moritz Warning <moritzwarning@web.de> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-07-14 21:37:10 +00:00
DEVICE_VENDOR := Raspberry Pi
brcm2708: image: stop using mkknlimg script Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-12-27 16:24:14 +00:00
KERNEL := kernel-bin
brcm2708: bcm2710: add 64 bit support for Raspberry Pi 3 64 bit support for Raspberry Pi 3 is experimental. However, bcm2709 subtarget should serve as a stable and compatible 32 bit support. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-02-07 23:38:21 +00:00
KERNEL_IMG := kernel.img
brcm2708: split sdcard.img.gz into a sysupgrade and factory image @vahid-dan reported a issue with extracting the rpi images with Gnome's Archive Manager: "Ubuntu Archive Manager cannot extract the file and it just throws a general error message: "An error occurred while extracting files". <https://forum.lede-project.org/t/corrupted-pre-built-v18-06-0-rc2-image-for-rpi> @blogic told me to split the single sdcard.img.gz for the RPi into a sysupgrade and a factory image for all brcm2708 targets. The factory images will have no metadata attached, this way these utilities that can't deal with the attached metadata will not fail for no reason. Cc: John Crispin <john@phrozen.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-07-29 09:55:14 +00:00
IMAGES := factory.img.gz sysupgrade.img.gz
brcm2708: Add Raspberry Pi 4 support - Support added to bcm2709 subtarget (32 bit). - 64 bit kernel still requires many hacks on RPi 4B. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-07-13 11:33:44 +00:00
IMAGE/sysupgrade.img.gz := boot-common | boot-2708 | sdcard-img | gzip | append-metadata
IMAGE/factory.img.gz := boot-common | boot-2708 | sdcard-img | gzip
brcm2708: add DT support Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 46344
2015-07-14 07:37:29 +00:00
endef
adds target used by rapsberry pi Add support for Raspberry Pi / brcm2708 / 2835 Signed-off-by: Ian Ridge <ianridge [at] gmail.com> SVN-Revision: 32825
2012-07-24 20:39:17 +00:00
brcm2708: convert to the new building system Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-12 17:49:20 +00:00
define Device/rpi
bcm27xx: add support for RPI A, A+, 3A+, Zero2 and Zero2W These devices were already supported. I merely added missing entries to: 1. make them easier to locate in firmware selector 2. allow firmware upgrades to proceed without dire warnings Sample dire warning contains: upgrade: Device raspberrypi,model-zero-2-w not supported by this image upgrade: Supported devices: rpi-3-b rpi-3-b-plus rpi-zero-2 \ raspberrypi,2-model-b-rev2 raspberrypi,3-model-b \ raspberrypi,3-model-b-plus raspberrypi,3-compute-module \ raspberrypi,compute-module-3 raspberrypi,model-zero-2 With this patch, the firmware upgrade proceeds normally. Signed-off-by: Dave Brand <dbrand666@users.noreply.github.com>
2024-04-13 19:36:07 +00:00
DEVICE_MODEL := A/A+/B/B+/CM/Zero/ZeroW
bcm27xx: enable 6.6 testing kernel The bcm27xx now supports 6.6 kernel as testing. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-05-10 16:49:13 +00:00
DEVICE_DTS := \
broadcom/bcm2708-rpi-b broadcom/bcm2708-rpi-b-rev1 broadcom/bcm2708-rpi-b-plus \
broadcom/bcm2708-rpi-cm \
broadcom/bcm2708-rpi-zero broadcom/bcm2708-rpi-zero-w
brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-11-10 11:03:18 +00:00
SUPPORTED_DEVICES := \
bcm27xx: add support for RPI A, A+, 3A+, Zero2 and Zero2W These devices were already supported. I merely added missing entries to: 1. make them easier to locate in firmware selector 2. allow firmware upgrades to proceed without dire warnings Sample dire warning contains: upgrade: Device raspberrypi,model-zero-2-w not supported by this image upgrade: Supported devices: rpi-3-b rpi-3-b-plus rpi-zero-2 \ raspberrypi,2-model-b-rev2 raspberrypi,3-model-b \ raspberrypi,3-model-b-plus raspberrypi,3-compute-module \ raspberrypi,compute-module-3 raspberrypi,model-zero-2 With this patch, the firmware upgrade proceeds normally. Signed-off-by: Dave Brand <dbrand666@users.noreply.github.com>
2024-04-13 19:36:07 +00:00
rpi-a rpi-a-plus \
rpi-b rpi-b-plus \
rpi-cm \
rpi-zero rpi-zero-w \
raspberrypi,model-a raspberrypi,model-a-plus \
brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-11-10 11:03:18 +00:00
raspberrypi,model-b raspberrypi,model-b-plus raspberrypi,model-b-rev2 \
raspberrypi,compute-module raspberrypi,compute-module-1 \
raspberrypi,model-zero raspberrypi,model-zero-w
brcm2708: switch to linux-firmware SDIO NVRAM Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-07-13 11:30:57 +00:00
DEVICE_PACKAGES := \
brcm2708: switch to cypress-firmware package Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-09-04 15:22:54 +00:00
cypress-firmware-43430-sdio \
linux-firmware: broadcom: consolidate NVRAM packages NVRAM packages for the same wireless chip are consolidated into one as they contain only small text files and symlinks. Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
2022-11-14 04:11:06 +00:00
brcmfmac-nvram-43430-sdio \
treewide: replace wpad-basic-wolfssl default The newly merged mbedtls backend is smaller and has fewer ABI related issues than the wolfSSL one. Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-12-28 04:44:11 +00:00
kmod-brcmfmac wpad-basic-mbedtls
adds target used by rapsberry pi Add support for Raspberry Pi / brcm2708 / 2835 Signed-off-by: Ian Ridge <ianridge [at] gmail.com> SVN-Revision: 32825
2012-07-24 20:39:17 +00:00
endef
bcm2708: explicitly check for SUBTARGET instead of using the device SUBTARGETS variable Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-18 11:43:57 +00:00
ifeq ($(SUBTARGET),bcm2708)
TARGET_DEVICES += rpi
endif
adds target used by rapsberry pi Add support for Raspberry Pi / brcm2708 / 2835 Signed-off-by: Ian Ridge <ianridge [at] gmail.com> SVN-Revision: 32825
2012-07-24 20:39:17 +00:00
brcm2708: convert to the new building system Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-12 17:49:20 +00:00
define Device/rpi-2
bcm27xx: add bit variant to redundant RaspberryPi Both bcm2709 and bcm2710 firmware can run on the same RaspberryPi models, varying however in 32 and 64 Bit architectures. The model name alone does not include the architecture information, which becomes problematic if looking at a overview that only contains the names. By adding a variant it is possible to tell the architecture. Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-11-06 19:54:20 +00:00
DEVICE_MODEL := 2B/2B 1.2
DEVICE_VARIANT := (32bit)
DEVICE_ALT0_VENDOR := Raspberry Pi
bcm27xx: add support for RPI A, A+, 3A+, Zero2 and Zero2W These devices were already supported. I merely added missing entries to: 1. make them easier to locate in firmware selector 2. allow firmware upgrades to proceed without dire warnings Sample dire warning contains: upgrade: Device raspberrypi,model-zero-2-w not supported by this image upgrade: Supported devices: rpi-3-b rpi-3-b-plus rpi-zero-2 \ raspberrypi,2-model-b-rev2 raspberrypi,3-model-b \ raspberrypi,3-model-b-plus raspberrypi,3-compute-module \ raspberrypi,compute-module-3 raspberrypi,model-zero-2 With this patch, the firmware upgrade proceeds normally. Signed-off-by: Dave Brand <dbrand666@users.noreply.github.com>
2024-04-13 19:36:07 +00:00
DEVICE_ALT0_MODEL := 3A+/3B/3B+/CM3/Zero2/Zero2W
bcm27xx: add bit variant to redundant RaspberryPi Both bcm2709 and bcm2710 firmware can run on the same RaspberryPi models, varying however in 32 and 64 Bit architectures. The model name alone does not include the architecture information, which becomes problematic if looking at a overview that only contains the names. By adding a variant it is possible to tell the architecture. Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-11-06 19:54:20 +00:00
DEVICE_ALT0_VARIANT := (32bit)
DEVICE_ALT1_VENDOR := Raspberry Pi
cypress-nvram: use symlink to provide NVRAM for some RPis This is to align the implementation with upstream `linux-firmware`. Some Raspberry Pi boards do not have dedicated NVRAM in `linux-firmware` source repository, their NVRAM is provided through a symbolic link to NVRAM of another board with an identical wireless design. Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
2022-10-22 15:09:19 +00:00
DEVICE_ALT1_MODEL := 4B/400/CM4
bcm27xx: add bit variant to redundant RaspberryPi Both bcm2709 and bcm2710 firmware can run on the same RaspberryPi models, varying however in 32 and 64 Bit architectures. The model name alone does not include the architecture information, which becomes problematic if looking at a overview that only contains the names. By adding a variant it is possible to tell the architecture. Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-11-06 19:54:20 +00:00
DEVICE_ALT1_VARIANT := (32bit)
bcm27xx: enable 6.6 testing kernel The bcm27xx now supports 6.6 kernel as testing. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-05-10 16:49:13 +00:00
DEVICE_DTS := \
broadcom/bcm2709-rpi-2-b broadcom/bcm2710-rpi-2-b \
broadcom/bcm2710-rpi-3-b broadcom/bcm2710-rpi-3-b-plus \
broadcom/bcm2711-rpi-4-b broadcom/bcm2711-rpi-400 \
broadcom/bcm2710-rpi-cm3 broadcom/bcm2711-rpi-cm4 \
bcm27xx: drop kernel 6.1 support kernel 6.1 can be dropped since 6.6 is the default kernel. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-06-18 20:10:25 +00:00
broadcom/bcm2710-rpi-zero-2 broadcom/bcm2710-rpi-zero-2-w
brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-11-10 11:03:18 +00:00
SUPPORTED_DEVICES := \
bcm27xx: add support for RPI A, A+, 3A+, Zero2 and Zero2W These devices were already supported. I merely added missing entries to: 1. make them easier to locate in firmware selector 2. allow firmware upgrades to proceed without dire warnings Sample dire warning contains: upgrade: Device raspberrypi,model-zero-2-w not supported by this image upgrade: Supported devices: rpi-3-b rpi-3-b-plus rpi-zero-2 \ raspberrypi,2-model-b-rev2 raspberrypi,3-model-b \ raspberrypi,3-model-b-plus raspberrypi,3-compute-module \ raspberrypi,compute-module-3 raspberrypi,model-zero-2 With this patch, the firmware upgrade proceeds normally. Signed-off-by: Dave Brand <dbrand666@users.noreply.github.com>
2024-04-13 19:36:07 +00:00
rpi-2-b \
rpi-3-a-plus \
rpi-3-b rpi-3-b-plus \
rpi-4-b rpi-400 \
rpi-cm \
rpi-zero-2 rpi-zero-2-w \
brcm2708: add support for Raspberry Pi 2B 1.2 RPi 2B 1.2 has a BCM2710/BCM2837 like RPi 3 devices. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-09-19 15:32:44 +00:00
raspberrypi,2-model-b raspberrypi,2-model-b-rev2 \
bcm27xx: add support for RPI A, A+, 3A+, Zero2 and Zero2W These devices were already supported. I merely added missing entries to: 1. make them easier to locate in firmware selector 2. allow firmware upgrades to proceed without dire warnings Sample dire warning contains: upgrade: Device raspberrypi,model-zero-2-w not supported by this image upgrade: Supported devices: rpi-3-b rpi-3-b-plus rpi-zero-2 \ raspberrypi,2-model-b-rev2 raspberrypi,3-model-b \ raspberrypi,3-model-b-plus raspberrypi,3-compute-module \ raspberrypi,compute-module-3 raspberrypi,model-zero-2 With this patch, the firmware upgrade proceeds normally. Signed-off-by: Dave Brand <dbrand666@users.noreply.github.com>
2024-04-13 19:36:07 +00:00
raspberrypi,3-model-a-plus \
brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-11-10 11:03:18 +00:00
raspberrypi,3-model-b raspberrypi,3-model-b-plus \
brcm2708: add bcm2711 subtarget (RPi 4B aarch64) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-08-02 18:35:59 +00:00
raspberrypi,3-compute-module raspberrypi,compute-module-3 \
bcm27xx: add support for Raspberry Pi Zero 2 Due to licensing uncertainty, we do not include the firmwares for the wireless chips used in the Raspberry Pi Zero 2 W. To have working wireless, follow the instructions below. For people building their own images: mkdir -p files/lib/firmware/brcm wget -P files/lib/firmware/brcm/ https://github.com/RPi-Distro/firmware-nonfree/raw/bullseye/debian/config/brcm80211/brcm/brcmfmac43436-sdio.bin wget -P files/lib/firmware/brcm/ https://github.com/RPi-Distro/firmware-nonfree/raw/bullseye/debian/config/brcm80211/brcm/brcmfmac43436-sdio.txt wget -P files/lib/firmware/brcm/ https://github.com/RPi-Distro/firmware-nonfree/raw/bullseye/debian/config/brcm80211/brcm/brcmfmac43436s-sdio.bin wget -P files/lib/firmware/brcm/ https://github.com/RPi-Distro/firmware-nonfree/raw/bullseye/debian/config/brcm80211/brcm/brcmfmac43436s-sdio.txt Now build the OpenWrt image as usual, and it will include the firmware files in the correct location. For people using ext4 images: Write the ext4 image to the sdcard, then mount the 2nd partition and put the firmware files from the links above in /lib/firmware/brcm relative from the mount point where the partition is mounted. For people using squashfs images: Write the squashfs image to the sdcard, place it in the Raspberry Pi Zero 2 W, boot it and wait for the overlay filesystem to be created. Find the offset of the overlay filesystem in sysfs: # cat /sys/devices/virtual/block/loop0/loop/offset 25755648 Shut down the device, unplug the power and move the SD card to a Linux computer. Mount the 2nd partition of the sdcard as a loop device with the offset found earlier. sudo mount /dev/sdh2 -o loop,offset=25755648 /mnt/temp Put the firmware files from the links above in /upper/lib/firmware/brcm relative to the mount point where the loop device is mounted. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Tested-by: Peter van Dijk <peter@7bits.nl>
2021-11-01 21:39:48 +00:00
raspberrypi,400 raspberrypi,4-compute-module raspberrypi,4-model-b \
bcm27xx: add support for RPI A, A+, 3A+, Zero2 and Zero2W These devices were already supported. I merely added missing entries to: 1. make them easier to locate in firmware selector 2. allow firmware upgrades to proceed without dire warnings Sample dire warning contains: upgrade: Device raspberrypi,model-zero-2-w not supported by this image upgrade: Supported devices: rpi-3-b rpi-3-b-plus rpi-zero-2 \ raspberrypi,2-model-b-rev2 raspberrypi,3-model-b \ raspberrypi,3-model-b-plus raspberrypi,3-compute-module \ raspberrypi,compute-module-3 raspberrypi,model-zero-2 With this patch, the firmware upgrade proceeds normally. Signed-off-by: Dave Brand <dbrand666@users.noreply.github.com>
2024-04-13 19:36:07 +00:00
raspberrypi,model-zero-2 raspberrypi,model-zero-2-w
brcm2708: switch to linux-firmware SDIO NVRAM Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-07-13 11:30:57 +00:00
DEVICE_PACKAGES := \
brcm2708: switch to cypress-firmware package Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-09-04 15:22:54 +00:00
cypress-firmware-43430-sdio \
linux-firmware: broadcom: consolidate NVRAM packages NVRAM packages for the same wireless chip are consolidated into one as they contain only small text files and symlinks. Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
2022-11-14 04:11:06 +00:00
brcmfmac-nvram-43430-sdio \
brcm2708: switch to cypress-firmware package Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-09-04 15:22:54 +00:00
cypress-firmware-43455-sdio \
linux-firmware: broadcom: consolidate NVRAM packages NVRAM packages for the same wireless chip are consolidated into one as they contain only small text files and symlinks. Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
2022-11-14 04:11:06 +00:00
brcmfmac-nvram-43455-sdio \
treewide: replace wpad-basic-wolfssl default The newly merged mbedtls backend is smaller and has fewer ABI related issues than the wolfSSL one. Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-12-28 04:44:11 +00:00
kmod-brcmfmac wpad-basic-mbedtls
brcm2708: Add Raspberry Pi 4 support - Support added to bcm2709 subtarget (32 bit). - 64 bit kernel still requires many hacks on RPi 4B. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-07-13 11:33:44 +00:00
IMAGE/sysupgrade.img.gz := boot-common | boot-2708 | boot-2711 | sdcard-img | gzip | append-metadata
IMAGE/factory.img.gz := boot-common | boot-2708 | boot-2711 | sdcard-img | gzip
brcm2708: convert to the new building system Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-12 17:49:20 +00:00
endef
brcm2708: fix SUBTARGET checks for bcm2709/bcm2710 This regression was introduced in commit cf58007a Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-20 17:07:36 +00:00
ifeq ($(SUBTARGET),bcm2709)
bcm2708: explicitly check for SUBTARGET instead of using the device SUBTARGETS variable Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-18 11:43:57 +00:00
TARGET_DEVICES += rpi-2
endif
brcm2708: add Raspberry Pi 3 support Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 48967
2016-03-08 18:11:55 +00:00
brcm2708: convert to the new building system Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-12 17:49:20 +00:00
define Device/rpi-3
bcm27xx: add support for RPI A, A+, 3A+, Zero2 and Zero2W These devices were already supported. I merely added missing entries to: 1. make them easier to locate in firmware selector 2. allow firmware upgrades to proceed without dire warnings Sample dire warning contains: upgrade: Device raspberrypi,model-zero-2-w not supported by this image upgrade: Supported devices: rpi-3-b rpi-3-b-plus rpi-zero-2 \ raspberrypi,2-model-b-rev2 raspberrypi,3-model-b \ raspberrypi,3-model-b-plus raspberrypi,3-compute-module \ raspberrypi,compute-module-3 raspberrypi,model-zero-2 With this patch, the firmware upgrade proceeds normally. Signed-off-by: Dave Brand <dbrand666@users.noreply.github.com>
2024-04-13 19:36:07 +00:00
DEVICE_MODEL := 3A+/3B/3B+/CM3/Zero2/Zero2W
bcm27xx: add bit variant to redundant RaspberryPi Both bcm2709 and bcm2710 firmware can run on the same RaspberryPi models, varying however in 32 and 64 Bit architectures. The model name alone does not include the architecture information, which becomes problematic if looking at a overview that only contains the names. By adding a variant it is possible to tell the architecture. Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-11-06 19:54:20 +00:00
DEVICE_VARIANT := (64bit)
DEVICE_ALT0_VENDOR := Raspberry Pi
DEVICE_ALT0_MODEL := 2B-1.2
DEVICE_ALT0_VARIANT := (64bit)
brcm2708: bcm2710: add 64 bit support for Raspberry Pi 3 64 bit support for Raspberry Pi 3 is experimental. However, bcm2709 subtarget should serve as a stable and compatible 32 bit support. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2017-02-07 23:38:21 +00:00
KERNEL_IMG := kernel8.img
brcm2708: add support for Raspberry Pi 2B 1.2 RPi 2B 1.2 has a BCM2710/BCM2837 like RPi 3 devices. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-09-19 15:32:44 +00:00
DEVICE_DTS := \
broadcom/bcm2710-rpi-2-b \
broadcom/bcm2710-rpi-3-b broadcom/bcm2710-rpi-3-b-plus \
bcm27xx: add support for Raspberry Pi Zero 2 Due to licensing uncertainty, we do not include the firmwares for the wireless chips used in the Raspberry Pi Zero 2 W. To have working wireless, follow the instructions below. For people building their own images: mkdir -p files/lib/firmware/brcm wget -P files/lib/firmware/brcm/ https://github.com/RPi-Distro/firmware-nonfree/raw/bullseye/debian/config/brcm80211/brcm/brcmfmac43436-sdio.bin wget -P files/lib/firmware/brcm/ https://github.com/RPi-Distro/firmware-nonfree/raw/bullseye/debian/config/brcm80211/brcm/brcmfmac43436-sdio.txt wget -P files/lib/firmware/brcm/ https://github.com/RPi-Distro/firmware-nonfree/raw/bullseye/debian/config/brcm80211/brcm/brcmfmac43436s-sdio.bin wget -P files/lib/firmware/brcm/ https://github.com/RPi-Distro/firmware-nonfree/raw/bullseye/debian/config/brcm80211/brcm/brcmfmac43436s-sdio.txt Now build the OpenWrt image as usual, and it will include the firmware files in the correct location. For people using ext4 images: Write the ext4 image to the sdcard, then mount the 2nd partition and put the firmware files from the links above in /lib/firmware/brcm relative from the mount point where the partition is mounted. For people using squashfs images: Write the squashfs image to the sdcard, place it in the Raspberry Pi Zero 2 W, boot it and wait for the overlay filesystem to be created. Find the offset of the overlay filesystem in sysfs: # cat /sys/devices/virtual/block/loop0/loop/offset 25755648 Shut down the device, unplug the power and move the SD card to a Linux computer. Mount the 2nd partition of the sdcard as a loop device with the offset found earlier. sudo mount /dev/sdh2 -o loop,offset=25755648 /mnt/temp Put the firmware files from the links above in /upper/lib/firmware/brcm relative to the mount point where the loop device is mounted. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Tested-by: Peter van Dijk <peter@7bits.nl>
2021-11-01 21:39:48 +00:00
broadcom/bcm2710-rpi-cm3 \
bcm27xx: add support for RPI A, A+, 3A+, Zero2 and Zero2W These devices were already supported. I merely added missing entries to: 1. make them easier to locate in firmware selector 2. allow firmware upgrades to proceed without dire warnings Sample dire warning contains: upgrade: Device raspberrypi,model-zero-2-w not supported by this image upgrade: Supported devices: rpi-3-b rpi-3-b-plus rpi-zero-2 \ raspberrypi,2-model-b-rev2 raspberrypi,3-model-b \ raspberrypi,3-model-b-plus raspberrypi,3-compute-module \ raspberrypi,compute-module-3 raspberrypi,model-zero-2 With this patch, the firmware upgrade proceeds normally. Signed-off-by: Dave Brand <dbrand666@users.noreply.github.com>
2024-04-13 19:36:07 +00:00
broadcom/bcm2710-rpi-zero-2 broadcom/bcm2710-rpi-zero-2-w
brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-11-10 11:03:18 +00:00
SUPPORTED_DEVICES := \
bcm27xx: add support for RPI A, A+, 3A+, Zero2 and Zero2W These devices were already supported. I merely added missing entries to: 1. make them easier to locate in firmware selector 2. allow firmware upgrades to proceed without dire warnings Sample dire warning contains: upgrade: Device raspberrypi,model-zero-2-w not supported by this image upgrade: Supported devices: rpi-3-b rpi-3-b-plus rpi-zero-2 \ raspberrypi,2-model-b-rev2 raspberrypi,3-model-b \ raspberrypi,3-model-b-plus raspberrypi,3-compute-module \ raspberrypi,compute-module-3 raspberrypi,model-zero-2 With this patch, the firmware upgrade proceeds normally. Signed-off-by: Dave Brand <dbrand666@users.noreply.github.com>
2024-04-13 19:36:07 +00:00
rpi-3-a-plus \
rpi-3-b rpi-3-b-plus \
rpi-zero-2 rpi-zero-2-w \
brcm2708: add support for Raspberry Pi 2B 1.2 RPi 2B 1.2 has a BCM2710/BCM2837 like RPi 3 devices. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-09-19 15:32:44 +00:00
raspberrypi,2-model-b-rev2 \
bcm27xx: add support for RPI A, A+, 3A+, Zero2 and Zero2W These devices were already supported. I merely added missing entries to: 1. make them easier to locate in firmware selector 2. allow firmware upgrades to proceed without dire warnings Sample dire warning contains: upgrade: Device raspberrypi,model-zero-2-w not supported by this image upgrade: Supported devices: rpi-3-b rpi-3-b-plus rpi-zero-2 \ raspberrypi,2-model-b-rev2 raspberrypi,3-model-b \ raspberrypi,3-model-b-plus raspberrypi,3-compute-module \ raspberrypi,compute-module-3 raspberrypi,model-zero-2 With this patch, the firmware upgrade proceeds normally. Signed-off-by: Dave Brand <dbrand666@users.noreply.github.com>
2024-04-13 19:36:07 +00:00
raspberrypi,3-model-a-plus \
brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2018-11-10 11:03:18 +00:00
raspberrypi,3-model-b raspberrypi,3-model-b-plus \
bcm27xx: add support for Raspberry Pi Zero 2 Due to licensing uncertainty, we do not include the firmwares for the wireless chips used in the Raspberry Pi Zero 2 W. To have working wireless, follow the instructions below. For people building their own images: mkdir -p files/lib/firmware/brcm wget -P files/lib/firmware/brcm/ https://github.com/RPi-Distro/firmware-nonfree/raw/bullseye/debian/config/brcm80211/brcm/brcmfmac43436-sdio.bin wget -P files/lib/firmware/brcm/ https://github.com/RPi-Distro/firmware-nonfree/raw/bullseye/debian/config/brcm80211/brcm/brcmfmac43436-sdio.txt wget -P files/lib/firmware/brcm/ https://github.com/RPi-Distro/firmware-nonfree/raw/bullseye/debian/config/brcm80211/brcm/brcmfmac43436s-sdio.bin wget -P files/lib/firmware/brcm/ https://github.com/RPi-Distro/firmware-nonfree/raw/bullseye/debian/config/brcm80211/brcm/brcmfmac43436s-sdio.txt Now build the OpenWrt image as usual, and it will include the firmware files in the correct location. For people using ext4 images: Write the ext4 image to the sdcard, then mount the 2nd partition and put the firmware files from the links above in /lib/firmware/brcm relative from the mount point where the partition is mounted. For people using squashfs images: Write the squashfs image to the sdcard, place it in the Raspberry Pi Zero 2 W, boot it and wait for the overlay filesystem to be created. Find the offset of the overlay filesystem in sysfs: # cat /sys/devices/virtual/block/loop0/loop/offset 25755648 Shut down the device, unplug the power and move the SD card to a Linux computer. Mount the 2nd partition of the sdcard as a loop device with the offset found earlier. sudo mount /dev/sdh2 -o loop,offset=25755648 /mnt/temp Put the firmware files from the links above in /upper/lib/firmware/brcm relative to the mount point where the loop device is mounted. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Tested-by: Peter van Dijk <peter@7bits.nl>
2021-11-01 21:39:48 +00:00
raspberrypi,3-compute-module raspberrypi,compute-module-3 \
bcm27xx: add support for RPI A, A+, 3A+, Zero2 and Zero2W These devices were already supported. I merely added missing entries to: 1. make them easier to locate in firmware selector 2. allow firmware upgrades to proceed without dire warnings Sample dire warning contains: upgrade: Device raspberrypi,model-zero-2-w not supported by this image upgrade: Supported devices: rpi-3-b rpi-3-b-plus rpi-zero-2 \ raspberrypi,2-model-b-rev2 raspberrypi,3-model-b \ raspberrypi,3-model-b-plus raspberrypi,3-compute-module \ raspberrypi,compute-module-3 raspberrypi,model-zero-2 With this patch, the firmware upgrade proceeds normally. Signed-off-by: Dave Brand <dbrand666@users.noreply.github.com>
2024-04-13 19:36:07 +00:00
raspberrypi,model-zero-2 raspberrypi,model-zero-2-w
brcm2708: switch to linux-firmware SDIO NVRAM Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-07-13 11:30:57 +00:00
DEVICE_PACKAGES := \
brcm2708: switch to cypress-firmware package Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-09-04 15:22:54 +00:00
cypress-firmware-43430-sdio \
linux-firmware: broadcom: consolidate NVRAM packages NVRAM packages for the same wireless chip are consolidated into one as they contain only small text files and symlinks. Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
2022-11-14 04:11:06 +00:00
brcmfmac-nvram-43430-sdio \
brcm2708: switch to cypress-firmware package Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-09-04 15:22:54 +00:00
cypress-firmware-43455-sdio \
linux-firmware: broadcom: consolidate NVRAM packages NVRAM packages for the same wireless chip are consolidated into one as they contain only small text files and symlinks. Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
2022-11-14 04:11:06 +00:00
brcmfmac-nvram-43455-sdio \
treewide: replace wpad-basic-wolfssl default The newly merged mbedtls backend is smaller and has fewer ABI related issues than the wolfSSL one. Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-12-28 04:44:11 +00:00
kmod-brcmfmac wpad-basic-mbedtls
brcm2708: convert to the new building system Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-12 17:49:20 +00:00
endef
brcm2708: fix SUBTARGET checks for bcm2709/bcm2710 This regression was introduced in commit cf58007a Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-20 17:07:36 +00:00
ifeq ($(SUBTARGET),bcm2710)
bcm2708: explicitly check for SUBTARGET instead of using the device SUBTARGETS variable Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-18 11:43:57 +00:00
TARGET_DEVICES += rpi-3
endif
brcm2708: add DT support Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 46344
2015-07-14 07:37:29 +00:00
brcm2708: add bcm2711 subtarget (RPi 4B aarch64) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-08-02 18:35:59 +00:00
define Device/rpi-4
cypress-nvram: use symlink to provide NVRAM for some RPis This is to align the implementation with upstream `linux-firmware`. Some Raspberry Pi boards do not have dedicated NVRAM in `linux-firmware` source repository, their NVRAM is provided through a symbolic link to NVRAM of another board with an identical wireless design. Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
2022-10-22 15:09:19 +00:00
DEVICE_MODEL := 4B/400/CM4
bcm27xx: add bit variant to redundant RaspberryPi Both bcm2709 and bcm2710 firmware can run on the same RaspberryPi models, varying however in 32 and 64 Bit architectures. The model name alone does not include the architecture information, which becomes problematic if looking at a overview that only contains the names. By adding a variant it is possible to tell the architecture. Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-11-06 19:54:20 +00:00
DEVICE_VARIANT := (64bit)
brcm2708: add bcm2711 subtarget (RPi 4B aarch64) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-08-02 18:35:59 +00:00
KERNEL_IMG := kernel8.img
bcm27xx: add support for RPI CM4 and RPI 400 Support added to bcm2709 (32 bits) and bcm2711 (64 bits). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-02-18 22:07:05 +00:00
DEVICE_DTS := \
broadcom/bcm2711-rpi-400 \
broadcom/bcm2711-rpi-4-b \
broadcom/bcm2711-rpi-cm4
brcm2708: add bcm2711 subtarget (RPi 4B aarch64) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-08-02 18:35:59 +00:00
SUPPORTED_DEVICES := \
bcm27xx: add support for RPI CM4 and RPI 400 Support added to bcm2709 (32 bits) and bcm2711 (64 bits). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-02-18 22:07:05 +00:00
raspberrypi,400 \
raspberrypi,4-compute-module \
brcm2708: add bcm2711 subtarget (RPi 4B aarch64) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-08-02 18:35:59 +00:00
raspberrypi,4-model-b
DEVICE_PACKAGES := \
brcm2708: switch to cypress-firmware package Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-09-04 15:22:54 +00:00
cypress-firmware-43455-sdio \
linux-firmware: broadcom: consolidate NVRAM packages NVRAM packages for the same wireless chip are consolidated into one as they contain only small text files and symlinks. Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
2022-11-14 04:11:06 +00:00
brcmfmac-nvram-43455-sdio \
treewide: replace wpad-basic-wolfssl default The newly merged mbedtls backend is smaller and has fewer ABI related issues than the wolfSSL one. Signed-off-by: Rosen Penev <rosenp@gmail.com>
2022-12-28 04:44:11 +00:00
kmod-brcmfmac wpad-basic-mbedtls \
bcm27xx: bcm2711: add kmod-r8169 Some carrier boards [1][2] for the Raspberry Pi CM4 that are specifically designed to be used as routers come with secondary NICs using a Realtek RTL8111 Gigabit Ethernet chip. When using such a board as a router with OpenWrt, it is very helpful when both NICs are working by default. Since the Raspberry Pi 4 and the CM4 have plenty of disk space, it should cause no harm to include the kmod-r8169. [1] https://wiki.dfrobot.com/Compute_Module_4_IoT_Router_Board_Mini_SKU_DFR0767 [2] https://www.waveshare.com/wiki/CM4-DUAL-ETH-MINI Signed-off-by: Johannes Heimansberg <git@jhe.dedyn.io> (r8169 should pull in the necessary dependencies.) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-12-12 14:39:58 +00:00
kmod-usb-net-lan78xx \
kmod-r8169
brcm2708: arm8stub is no longer needed It's already embedded on latest RPi firmware. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-08-03 06:17:29 +00:00
IMAGE/sysupgrade.img.gz := boot-common | boot-2711 | sdcard-img | gzip | append-metadata
IMAGE/factory.img.gz := boot-common | boot-2711 | sdcard-img | gzip
brcm2708: add bcm2711 subtarget (RPi 4B aarch64) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-08-02 18:35:59 +00:00
endef
ifeq ($(SUBTARGET),bcm2711)
TARGET_DEVICES += rpi-4
endif
bcm27xx: add new bcm2712 subtarget This patch adds support for Raspberry Pi 5. Instead of using 16K pages like Raspberry Pi OS, OpenWrt uses 4K pages due to incompatibilities with F2FS and other applications. There are multiple RPi forum posts with different cases and users are forcing kernel8.img to workaround them, which is the 64 bit kernel of the RPi 4. However, this isn't possible in OpenWrt because we only ship one kernel and we would have to add RPi 5 support to bcm2711 subtarget (RPi 4) for that workaround to work in OpenWrt. Specification: - Processor Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU, with cryptographic extension, 512KB L2 caches per core, 2048KB L3 cache Features: - VideoCore VII GPU, supports OpenGL ES 3.1, Vulkan 1.2 - Dual 4Kp60 HDMI display output with HDR support 4Kp60 HEVC decoder - LPDDR4X-4267 SDRAM 4GB and 8GB - Dual-band 802.11ac Wi-Fi - Bluetooth 5.0 / Bluetooth Low Energy - microSD card slot, with support for SDR104 high-speed mode - 2 x USB 3.0 ports - 2 x USB 2.0 ports - Gigabit Ethernet - 2 x 4 lane MIPI camera/display - PCIe 2.0 x1 - 5V/5A power via USB-C - Raspberry Pi standard 40-pin header - Real-time clock RTC - Power button Build system: x86_64 Build-tested: bcm2712 Run-tested: bcm2712/RPi5 Signed-off-by: Marty Jones <mj8263788@gmail.com> [Remove device variant, improve description] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-01-18 14:52:22 +00:00
define Device/rpi-5
DEVICE_MODEL := 5
KERNEL_IMG := kernel_2712.img
DEVICE_DTS := broadcom/bcm2712-rpi-5-b
SUPPORTED_DEVICES := raspberrypi,5-model-b
DEVICE_PACKAGES := \
cypress-firmware-43455-sdio \
brcmfmac-nvram-43455-sdio \
kmod-brcmfmac wpad-basic-mbedtls \
bcm27xx: bcm2712: enable USB symbols and drop packages This allows booting from USB. Fixes: 8b63d9ac4ae9 ("bcm27xx: add new bcm2712 subtarget") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-01-29 09:11:40 +00:00
kmod-hwmon-pwmfan kmod-thermal
bcm27xx: bcm2712: remove boot-2711 image files According to Raspberry Pi documentation, the RPi 5 First Stage Bootloader loads the linux kernel instead of loading the Second Stage Bootloader (start.elf): https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#differences-on-raspberry-pi-5 Fixes: 8b63d9a ("bcm27xx: add new bcm2712 subtarget") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-02-01 10:54:22 +00:00
IMAGE/sysupgrade.img.gz := boot-common | sdcard-img | gzip | append-metadata
IMAGE/factory.img.gz := boot-common | sdcard-img | gzip
bcm27xx: add new bcm2712 subtarget This patch adds support for Raspberry Pi 5. Instead of using 16K pages like Raspberry Pi OS, OpenWrt uses 4K pages due to incompatibilities with F2FS and other applications. There are multiple RPi forum posts with different cases and users are forcing kernel8.img to workaround them, which is the 64 bit kernel of the RPi 4. However, this isn't possible in OpenWrt because we only ship one kernel and we would have to add RPi 5 support to bcm2711 subtarget (RPi 4) for that workaround to work in OpenWrt. Specification: - Processor Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU, with cryptographic extension, 512KB L2 caches per core, 2048KB L3 cache Features: - VideoCore VII GPU, supports OpenGL ES 3.1, Vulkan 1.2 - Dual 4Kp60 HDMI display output with HDR support 4Kp60 HEVC decoder - LPDDR4X-4267 SDRAM 4GB and 8GB - Dual-band 802.11ac Wi-Fi - Bluetooth 5.0 / Bluetooth Low Energy - microSD card slot, with support for SDR104 high-speed mode - 2 x USB 3.0 ports - 2 x USB 2.0 ports - Gigabit Ethernet - 2 x 4 lane MIPI camera/display - PCIe 2.0 x1 - 5V/5A power via USB-C - Raspberry Pi standard 40-pin header - Real-time clock RTC - Power button Build system: x86_64 Build-tested: bcm2712 Run-tested: bcm2712/RPi5 Signed-off-by: Marty Jones <mj8263788@gmail.com> [Remove device variant, improve description] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2024-01-18 14:52:22 +00:00
endef
ifeq ($(SUBTARGET),bcm2712)
TARGET_DEVICES += rpi-5
endif
adds target used by rapsberry pi Add support for Raspberry Pi / brcm2708 / 2835 Signed-off-by: Ian Ridge <ianridge [at] gmail.com> SVN-Revision: 32825
2012-07-24 20:39:17 +00:00
$(eval $(call BuildImage))
Reference in New Issue Copy Permalink