openwrt/target/linux/bcm27xx/patches-6.1/950-0946-drm-vc4-plane-Change-ptr0_offset-to-an-array.patch

From 531f66804eb95323f807d240273087fbe162aeee Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime@cerno.tech>
Date: Fri, 24 Mar 2023 09:56:31 +0100
Subject: [PATCH] drm/vc4: plane: Change ptr0_offset to an array

The BCM2712 will have a fairly different dlist, that will feature one
Pointer 0 word for each plane.

Let's prepare by changing the ptr0_offset variable that holds the offset
in a dlist of the pointer 0 word to an array.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_drv.h   |  3 ++-
 drivers/gpu/drm/vc4/vc4_plane.c | 18 +++++++++---------
 2 files changed, 11 insertions(+), 10 deletions(-)

--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -14,6 +14,7 @@
 #include <drm/drm_debugfs.h>
 #include <drm/drm_device.h>
 #include <drm/drm_encoder.h>
+#include <drm/drm_fourcc.h>
 #include <drm/drm_gem_dma_helper.h>
 #include <drm/drm_managed.h>
 #include <drm/drm_mm.h>
@@ -430,7 +431,7 @@ struct vc4_plane_state {
 	 */
 	u32 pos0_offset;
 	u32 pos2_offset;
-	u32 ptr0_offset;
+	u32 ptr0_offset[DRM_FORMAT_MAX_PLANES];
 	u32 lbm_offset;
 
 	/* Offset where the plane's dlist was last stored in the
--- a/drivers/gpu/drm/vc4/vc4_plane.c
+++ b/drivers/gpu/drm/vc4/vc4_plane.c
@@ -1242,7 +1242,7 @@ static int vc4_plane_mode_set(struct drm
 	 *
 	 * The pointers may be any byte address.
 	 */
-	vc4_state->ptr0_offset = vc4_state->dlist_count;
+	vc4_state->ptr0_offset[0] = vc4_state->dlist_count;
 	for (i = 0; i < num_planes; i++)
 		vc4_dlist_write(vc4_state, vc4_state->offsets[i]);
 
@@ -1447,13 +1447,13 @@ void vc4_plane_async_set_fb(struct drm_p
 	 * scanout will start from this address as soon as the FIFO
 	 * needs to refill with pixels.
 	 */
-	writel(addr, &vc4_state->hw_dlist[vc4_state->ptr0_offset]);
+	writel(addr, &vc4_state->hw_dlist[vc4_state->ptr0_offset[0]]);
 
 	/* Also update the CPU-side dlist copy, so that any later
 	 * atomic updates that don't do a new modeset on our plane
 	 * also use our updated address.
 	 */
-	vc4_state->dlist[vc4_state->ptr0_offset] = addr;
+	vc4_state->dlist[vc4_state->ptr0_offset[0]] = addr;
 
 	drm_dev_exit(idx);
 }
@@ -1517,8 +1517,8 @@ static void vc4_plane_atomic_async_updat
 		new_vc4_state->dlist[vc4_state->pos0_offset];
 	vc4_state->dlist[vc4_state->pos2_offset] =
 		new_vc4_state->dlist[vc4_state->pos2_offset];
-	vc4_state->dlist[vc4_state->ptr0_offset] =
-		new_vc4_state->dlist[vc4_state->ptr0_offset];
+	vc4_state->dlist[vc4_state->ptr0_offset[0]] =
+		new_vc4_state->dlist[vc4_state->ptr0_offset[0]];
 
 	/* Note that we can't just call vc4_plane_write_dlist()
 	 * because that would smash the context data that the HVS is
@@ -1528,8 +1528,8 @@ static void vc4_plane_atomic_async_updat
 	       &vc4_state->hw_dlist[vc4_state->pos0_offset]);
 	writel(vc4_state->dlist[vc4_state->pos2_offset],
 	       &vc4_state->hw_dlist[vc4_state->pos2_offset]);
-	writel(vc4_state->dlist[vc4_state->ptr0_offset],
-	       &vc4_state->hw_dlist[vc4_state->ptr0_offset]);
+	writel(vc4_state->dlist[vc4_state->ptr0_offset[0]],
+	       &vc4_state->hw_dlist[vc4_state->ptr0_offset[0]]);
 
 	drm_dev_exit(idx);
 }
@@ -1556,7 +1556,7 @@ static int vc4_plane_atomic_async_check(
 	if (old_vc4_state->dlist_count != new_vc4_state->dlist_count ||
 	    old_vc4_state->pos0_offset != new_vc4_state->pos0_offset ||
 	    old_vc4_state->pos2_offset != new_vc4_state->pos2_offset ||
-	    old_vc4_state->ptr0_offset != new_vc4_state->ptr0_offset ||
+	    old_vc4_state->ptr0_offset[0] != new_vc4_state->ptr0_offset[0] ||
 	    vc4_lbm_size(plane->state) != vc4_lbm_size(new_plane_state))
 		return -EINVAL;
 
@@ -1566,7 +1566,7 @@ static int vc4_plane_atomic_async_check(
 	for (i = 0; i < new_vc4_state->dlist_count; i++) {
 		if (i == new_vc4_state->pos0_offset ||
 		    i == new_vc4_state->pos2_offset ||
-		    i == new_vc4_state->ptr0_offset ||
+		    i == new_vc4_state->ptr0_offset[0] ||
 		    (new_vc4_state->lbm_offset &&
 		     i == new_vc4_state->lbm_offset))
 			continue;