ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-20 22:23:27 +00:00
Code Issues Actions 5 Packages Projects Releases Wiki Activity
c2d1c32d1e
openwrt/target/linux/realtek/rtl838x/config-5.10

230 lines
5.8 KiB
Plaintext
Raw Normal View History

realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MMAP_RND_BITS_MAX=15
realtek: refresh and update config-5.10 This patch adjusts config-5.10 by running kernel_menuconfig. Note: - disable psb6970 phy driver (unused in realtek target?) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2021-05-05 13:47:19 +00:00
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
realtek: activate clock driver for RTL838X/RTL839X targets Make use the new clock driver for RTL838X and RTL839x target devices. Of course we will enable their primary consumer (cpufreq-dt) too. To be careful just set the default governor to userspace. As we rely on SRAM activate that module too. Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
2022-08-25 06:23:45 +00:00
# CONFIG_BMIPS_CPUFREQ is not set
realtek: timer driver: activate for RTL838X devices Use the new timer driver for the RTL838X devices. Remove the no longer needed modules. Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de> [correct timer compatible order, update selected symbols] Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-10-03 12:49:35 +00:00
# CONFIG_CEVT_R4K is not set
# CONFIG_CEVT_RTL9300 is not set
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_CLKDEV_LOOKUP=y
realtek: refresh and update config-5.10 This patch adjusts config-5.10 by running kernel_menuconfig. Note: - disable psb6970 phy driver (unused in realtek target?) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2021-05-05 13:47:19 +00:00
CONFIG_CLKSRC_MMIO=y
CONFIG_CLONE_BACKWARDS=y
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_COMMON_CLK=y
realtek: Disable boston clock We are not on the 'boston' platform so no point in having that clock driver enabled. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
2022-12-13 15:35:37 +00:00
# CONFIG_COMMON_CLK_BOSTON is not set
realtek: activate clock driver for RTL838X/RTL839X targets Make use the new clock driver for RTL838X and RTL839x target devices. Of course we will enable their primary consumer (cpufreq-dt) too. To be careful just set the default governor to userspace. As we rely on SRAM activate that module too. Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
2022-08-25 06:23:45 +00:00
CONFIG_COMMON_CLK_REALTEK=y
CONFIG_COMMON_CLK_RTL83XX=y
realtek: refresh and update config-5.10 This patch adjusts config-5.10 by running kernel_menuconfig. Note: - disable psb6970 phy driver (unused in realtek target?) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2021-05-05 13:47:19 +00:00
CONFIG_COMPAT_32BIT_TIME=y
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15
realtek: activate clock driver for RTL838X/RTL839X targets Make use the new clock driver for RTL838X and RTL839x target devices. Of course we will enable their primary consumer (cpufreq-dt) too. To be careful just set the default governor to userspace. As we rely on SRAM activate that module too. Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
2022-08-25 06:23:45 +00:00
CONFIG_CPUFREQ_DT=y
CONFIG_CPUFREQ_DT_PLATDEV=y
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_CPU_BIG_ENDIAN=y
realtek: activate clock driver for RTL838X/RTL839X targets Make use the new clock driver for RTL838X and RTL839x target devices. Of course we will enable their primary consumer (cpufreq-dt) too. To be careful just set the default governor to userspace. As we rely on SRAM activate that module too. Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
2022-08-25 06:23:45 +00:00
CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_STAT=y
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_CPU_GENERIC_DUMP_TLB=y
realtek: refresh and update config-5.10 This patch adjusts config-5.10 by running kernel_menuconfig. Note: - disable psb6970 phy driver (unused in realtek target?) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2021-05-05 13:47:19 +00:00
CONFIG_CPU_HAS_DIEI=y
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_RIXI=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_CPU_MIPS32=y
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
CONFIG_CPU_MIPSR2=y
CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
CONFIG_CPU_R4K_CACHE_TLB=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
realtek: activate clock driver for RTL838X/RTL839X targets Make use the new clock driver for RTL838X and RTL839x target devices. Of course we will enable their primary consumer (cpufreq-dt) too. To be careful just set the default governor to userspace. As we rely on SRAM activate that module too. Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
2022-08-25 06:23:45 +00:00
CONFIG_CPU_SUPPORTS_CPUFREQ=y
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CPU_SUPPORTS_MSA=y
generic: enable CRYPTO_LIB_BLAKE2S[_X86|_ARM] This is now built-in, enable so it won't propagate on target configs. Link: https://lkml.org/lkml/2022/1/3/168 Fixes: 79e7a2552e89 ("kernel: bump 5.15 to 5.15.44") Fixes: 0ca93670693b ("kernel: bump 5.10 to 5.10.119") Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> (Link to Kernel's commit taht made it built-in, CRYPTO_LIB_BLAKE2S[_ARM|_X86] as it's selectable, 5.10 backport) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-06-20 12:49:45 +00:00
CONFIG_CRYPTO_BLAKE2S=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
realtek: refresh and update config-5.10 This patch adjusts config-5.10 by running kernel_menuconfig. Note: - disable psb6970 phy driver (unused in realtek target?) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2021-05-05 13:47:19 +00:00
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_CRYPTO_RNG2=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_8250=y
CONFIG_EXTRA_FIRMWARE="rtl838x_phy/rtl838x_8214fc.fw rtl838x_phy/rtl838x_8218b.fw rtl838x_phy/rtl838x_8380.fw"
CONFIG_EXTRA_FIRMWARE_DIR="firmware"
CONFIG_FIXED_PHY=y
realtek: Increase zone size for Ethernet driver DMA Set CONFIG_FORCE_MAX_ZONEORDER setting to 13 to allow larger contiguous memory allocation for the DMA of the Ethernet driver. Increase the number of entries in the RX ring to 300 making use of the larger DMA region now possible for receiveing packets. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-12-31 16:53:40 +00:00
CONFIG_FORCE_MAX_ZONEORDER=13
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_LIB_ASHLDI3=y
CONFIG_GENERIC_LIB_ASHRDI3=y
CONFIG_GENERIC_LIB_CMPDI2=y
CONFIG_GENERIC_LIB_LSHRDI3=y
CONFIG_GENERIC_LIB_UCMPDI2=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PINCONF=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_TIME_VSYSCALL=y
realtek: backport gpio-realtek-otto driver from 5.13 to 5.10 This patch backports "gpio-realtek-otto" driver to Kernel 5.10. "MACH_REALTEK_RTL" is used as a platform name in upstream, but "RTL838X" is used in OpenWrt, so update the dependency by the additional patch. Note: GPIO mapping is changed in the upstreamed driver. old - new 24 - 0 25 - 1 26 - 2 27 - 3 28 - 4 29 - 5 30 - 6 31 - 7 16 - 8 17 - 9 18 - 10 19 - 11 20 - 12 21 - 13 22 - 14 23 - 15 8 - 16 9 - 17 10 - 18 11 - 19 12 - 20 13 - 21 14 - 22 15 - 23 Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2021-05-05 13:05:39 +00:00
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_GPIO_GENERIC=y
realtek: enable pca953x driver for rtl838x subtarget The system status LED on Panasonic Switch-M8eG PN28080K is connected to a PCA9539PW. To use the LED as a status LED of OpenWrt while booting, enable the pca953x driver and built-in to the kernel. Also enable CONFIG_GPIO_PCA953X_IRQ to use interrupt via RTL83xx GPIO. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Acked-by: Sander Vanheule <sander@svanheule.net>
2022-03-09 14:30:59 +00:00
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
realtek: backport gpio-realtek-otto driver from 5.13 to 5.10 This patch backports "gpio-realtek-otto" driver to Kernel 5.10. "MACH_REALTEK_RTL" is used as a platform name in upstream, but "RTL838X" is used in OpenWrt, so update the dependency by the additional patch. Note: GPIO mapping is changed in the upstreamed driver. old - new 24 - 0 25 - 1 26 - 2 27 - 3 28 - 4 29 - 5 30 - 6 31 - 7 16 - 8 17 - 9 18 - 10 19 - 11 20 - 12 21 - 13 22 - 14 23 - 15 8 - 16 9 - 17 10 - 18 11 - 19 12 - 20 13 - 21 14 - 22 15 - 23 Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2021-05-05 13:05:39 +00:00
CONFIG_GPIO_REALTEK_OTTO=y
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_GPIO_RTL8231=y
Revert "realtek: remove support for HPE 1920 series" This reverts commit a63aeaecf1f3387df020854c9b22a365207399ce. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-28 14:45:03 +00:00
CONFIG_GPIO_WATCHDOG=y
# CONFIG_GPIO_WATCHDOG_ARCH_INITCALL is not set
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_GRO_CELLS=y
CONFIG_HANDLE_DOMAIN_IRQ=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
realtek: Optimize kernel configuration for RTL838X The RTL838X SoCs do not use Aquantia PHYs, remove this. Also the RTL838X uses a high resolution R4K timer. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-12-29 21:00:47 +00:00
CONFIG_HIGH_RES_TIMERS=y
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_HWMON=y
CONFIG_HZ_PERIODIC=y
CONFIG_I2C=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_BOARDINFO=y
realtek: Add support for RTL9300/RTL9310 I2C controller This adds support for the RTL9300 and RTL9310 I2C controller. The controller implements the SMBus protocol for SMBus transfers over an I2C bus. The driver supports selecting one of the 2 possible SCL pins and any of the 8 possible SDA pins. Bus speeds of 100kHz (standard speed) and 400kHz (high speed I2C) are supported. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-12-11 19:14:47 +00:00
CONFIG_I2C_CHARDEV=y
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_I2C_GPIO=y
realtek: Add support for RTL9300/RTL9310 I2C multiplexing The RTL9300/RTL9310 I2C controllers have support for 2 independent I2C masters, each with a fixed SCL pin, that cannot be changed. Each of these masters can use 8 (RTL9300) or 16 (RTL9310) different pins for SDA. This multiplexer directly controls the two masters and their shared IO configuration registers to allow multiplexing between any of these busses. The two masters cannot be used in parallel as the multiplex is protected by a standard multiplex lock. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-12-11 19:25:37 +00:00
CONFIG_I2C_MUX=y
realtek: Optimize kernel configuration for RTL838X The RTL838X SoCs do not use Aquantia PHYs, remove this. Also the RTL838X uses a high resolution R4K timer. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-12-29 21:00:47 +00:00
# CONFIG_I2C_RTL9300 is not set
# CONFIG_I2C_MUX_RTL9300 is not set
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_MIPS_CPU=y
CONFIG_IRQ_WORK=y
CONFIG_JFFS2_ZLIB=y
CONFIG_LEDS_GPIO=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LIBFDT=y
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_MARVELL_PHY=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_DEVICE=y
realtek: refresh and update config-5.10 This patch adjusts config-5.10 by running kernel_menuconfig. Note: - disable psb6970 phy driver (unused in realtek target?) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2021-05-05 13:47:19 +00:00
CONFIG_MDIO_DEVRES=y
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_MDIO_I2C=y
CONFIG_MEMFD_CREATE=y
CONFIG_MFD_SYSCON=y
CONFIG_MIGRATION=y
CONFIG_MIPS=y
CONFIG_MIPS_ASID_BITS=8
CONFIG_MIPS_ASID_SHIFT=0
CONFIG_MIPS_CBPF_JIT=y
CONFIG_MIPS_CLOCK_VSYSCALL=y
# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
CONFIG_MIPS_CMDLINE_FROM_DTB=y
# CONFIG_MIPS_ELF_APPENDED_DTB is not set
realtek: activate clock driver for RTL838X/RTL839X targets Make use the new clock driver for RTL838X and RTL839x target devices. Of course we will enable their primary consumer (cpufreq-dt) too. To be careful just set the default governor to userspace. As we rely on SRAM activate that module too. Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
2022-08-25 06:23:45 +00:00
CONFIG_MIPS_EXTERNAL_TIMER=y
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_MIPS_L1_CACHE_SHIFT=5
realtek: refresh and update config-5.10 This patch adjusts config-5.10 by running kernel_menuconfig. Note: - disable psb6970 phy driver (unused in realtek target?) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2021-05-05 13:47:19 +00:00
CONFIG_MIPS_LD_CAN_LINK_VDSO=y
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
# CONFIG_MIPS_NO_APPENDED_DTB is not set
CONFIG_MIPS_RAW_APPENDED_DTB=y
CONFIG_MIPS_SPRAM=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPLIT_BRNIMAGE_FW=y
CONFIG_MTD_SPLIT_EVA_FW=y
CONFIG_MTD_SPLIT_FIRMWARE=y
Revert "realtek: remove support for HPE 1920 series" This reverts commit a63aeaecf1f3387df020854c9b22a365207399ce. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-28 14:45:03 +00:00
CONFIG_MTD_SPLIT_H3C_VFS=y
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_MTD_SPLIT_TPLINK_FW=y
CONFIG_MTD_SPLIT_UIMAGE_FW=y
realtek: add support for TP-Link SG2008P Add support for the TP-Link SG2008P switch. This is an RTL8380 based switch with 802.3af one the first four ports. Specifications: --------------- * SoC: Realtek RTL8380M * Flash: 32 MiB SPI flash (Vendor varies) * RAM: 256 MiB (Vendor varies) * Ethernet: 8x 10/100/1000 Mbps with PoE on 4 ports * Buttons: 1x "Reset" button on front panel * Power: 53.5V DC barrel jack * UART: 1x serial header, unpopulated * PoE: 1x TI TPS23861 I2C PoE controller Works: ------ - (8) RJ-45 ethernet ports - Switch functions - System LED Not yet enabled: ---------------- - Power-over-Ethernet (driver works, but doesn't enable "auto" mode) - PoE, Link/Act, PoE max and System LEDs Install via web interface: ------------------------- Not supported at this time. Install via serial console/tftp: -------------------------------- The footprints R27 (0201) and R28 (0402) are not populated. To enable serial console, 50 ohm resistors should be soldered -- any value from 0 ohm to 50 ohm will work. R27 can be replaced by a solder bridge. The u-boot firmware drops to a TP-Link specific "BOOTUTIL" shell at 38400 baud. There is no known way to exit out of this shell, and no way to do anything useful. Ideally, one would trick the bootloader into flashing the sysupgrade image first. However, if the image exceeds 6MiB in size, it will not work. The sysupgrade image can also be flashed. To install OpenWRT: Prepare a tftp server with: 1. server address: 192.168.0.146 2. the image as: "uImage.img" Power on device, and stop boot by pressing any key. Once the shell is active: 1. Ground out the CLK (pin 16) of the ROM (U7) 2. Select option "3. Start" 3. Bootloader notes that "The kernel has been damaged!" 4. Release CLK as sson as bootloader thinks image is corrupted. 5. Bootloader enters automatic recovery -- details printed on console 6. Watch as the bootloader flashes and boots OpenWRT. Blind install via tftp: ----------------------- This method works when it's not feasible to install a serial header. Prepare a tftp server with: 1. server address: 192.168.0.146 2. the image as: "uImage.img" 3. Watch network traffic (tcpdump or wireshark works) 4. Power on the device. 5. Wait 1-2 seconds then ground out the CLK (pin 16) of the ROM (U7) 6. When 192.168.0.30 makes tftp requests, release pin 16 7. Wait 2-3 minutes for device to auto-flash and boot OpenWRT Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2022-07-19 17:01:11 +00:00
CONFIG_MTD_VIRT_CONCAT=y
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NET_DEVLINK=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_RTL83XX=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_NET_RTL838X=y
CONFIG_NET_SWITCHDEV=y
realtek: Refresh kernel config with no_except_fill Update the config files with the previous commit. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
2023-01-09 13:39:45 +00:00
CONFIG_NO_EXCEPT_FILL=y
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
CONFIG_NVMEM=y
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_KOBJ=y
CONFIG_OF_MDIO=y
CONFIG_OF_NET=y
CONFIG_PCI_DRIVERS_LEGACY=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
CONFIG_PHYLINK=y
CONFIG_PINCTRL=y
realtek: activate clock driver for RTL838X/RTL839X targets Make use the new clock driver for RTL838X and RTL839x target devices. Of course we will enable their primary consumer (cpufreq-dt) too. To be careful just set the default governor to userspace. As we rely on SRAM activate that module too. Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
2022-08-25 06:23:45 +00:00
CONFIG_PM_OPP=y
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_POWER_RESET=y
realtek: Enable gpio-restart driver Add the gpio-restart driver to the realtek build. This way devices, which cannot reliably perform resets using the SoC's internal reset logic, can use a GPIO line to drive the SoC's hard reset input. Signed-off-by: Sander Vanheule <sander@svanheule.net>
2021-11-25 05:41:58 +00:00
CONFIG_POWER_RESET_GPIO_RESTART=y
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_POWER_RESET_SYSCON=y
realtek: refresh and update config-5.10 This patch adjusts config-5.10 by running kernel_menuconfig. Note: - disable psb6970 phy driver (unused in realtek target?) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2021-05-05 13:47:19 +00:00
CONFIG_RATIONAL=y
realtek: timer driver: activate for RTL838X devices Use the new timer driver for the RTL838X devices. Remove the no longer needed modules. Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de> [correct timer compatible order, update selected symbols] Signed-off-by: Sander Vanheule <sander@svanheule.net>
2022-10-03 12:49:35 +00:00
CONFIG_REALTEK_OTTO_TIMER=y
realtek: Add and enable watchdog node Add and enable the Realtek Otto WDT peripheral found on these SoCs. Default all devices to use standard (cold) reboot and "soc" resets. Devices that require the PLL value fixup before restarting, should pick the "cpu" or "software" reset mode. These devices also need to provide a custom reboot mode, by adding the reboot argument to the kernel command line: WDT reset mode | kernel reboot mode ----------------+--------------------------------------- soc | reboot=cold (default if not specified) cpu | reboot=warm software | reboot=software Preferrably, these devices should use an alternative restart method like gpio-restart to provide reliable restarts. Note that watchdog restarts are not yet exposed, since the _machine_restart override is still present. Signed-off-by: Sander Vanheule <sander@svanheule.net> Tested-by: Stijn Segers <foss@volatilesystems.org> Tested-by: Paul Fertser <fercerpav@gmail.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-11-14 18:45:33 +00:00
CONFIG_REALTEK_OTTO_WDT=y
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_REALTEK_PHY=y
realtek: refresh and update config-5.10 This patch adjusts config-5.10 by running kernel_menuconfig. Note: - disable psb6970 phy driver (unused in realtek target?) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2021-05-05 13:47:19 +00:00
CONFIG_REALTEK_SOC_PHY=y
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_REGMAP=y
realtek: enable pca953x driver for rtl838x subtarget The system status LED on Panasonic Switch-M8eG PN28080K is connected to a PCA9539PW. To use the LED as a status LED of OpenWrt while booting, enable the pca953x driver and built-in to the kernel. Also enable CONFIG_GPIO_PCA953X_IRQ to use interrupt via RTL83xx GPIO. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Acked-by: Sander Vanheule <sander@svanheule.net>
2022-03-09 14:30:59 +00:00
CONFIG_REGMAP_I2C=y
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_REGMAP_MMIO=y
CONFIG_RESET_CONTROLLER=y
realtek: Create 4 different Realtek Platforms Creates RTL83XX as a basic kernel config parameter for the RTL838X, RTL839x, RTL930X and RTL931X platforms with respective configurations for the SoCs, which are introduced in addition. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-12-29 20:54:21 +00:00
CONFIG_RTL83XX=y
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_RTL838X=y
realtek: Create 4 different Realtek Platforms Creates RTL83XX as a basic kernel config parameter for the RTL838X, RTL839x, RTL930X and RTL931X platforms with respective configurations for the SoCs, which are introduced in addition. Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
2021-12-29 20:54:21 +00:00
# CONFIG_RTL839X is not set
# CONFIG_RTL930X is not set
# CONFIG_RTL931X is not set
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SFP=y
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y
realtek: activate clock driver for RTL838X/RTL839X targets Make use the new clock driver for RTL838X and RTL839x target devices. Of course we will enable their primary consumer (cpufreq-dt) too. To be careful just set the default governor to userspace. As we rely on SRAM activate that module too. Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
2022-08-25 06:23:45 +00:00
CONFIG_SRAM=y
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_SRCU=y
CONFIG_SWPHY=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_SYS_SUPPORTS_MIPS16=y
CONFIG_TARGET_ISA_REV=2
CONFIG_TICK_CPU_ACCOUNTING=y
realtek: refresh and update config-5.10 This patch adjusts config-5.10 by running kernel_menuconfig. Note: - disable psb6970 phy driver (unused in realtek target?) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2021-05-05 13:47:19 +00:00
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_TINY_SRCU=y
CONFIG_USE_GENERIC_EARLY_PRINTK_8250=y
CONFIG_USE_OF=y
realtek: Add and enable watchdog node Add and enable the Realtek Otto WDT peripheral found on these SoCs. Default all devices to use standard (cold) reboot and "soc" resets. Devices that require the PLL value fixup before restarting, should pick the "cpu" or "software" reset mode. These devices also need to provide a custom reboot mode, by adding the reboot argument to the kernel command line: WDT reset mode | kernel reboot mode ----------------+--------------------------------------- soc | reboot=cold (default if not specified) cpu | reboot=warm software | reboot=software Preferrably, these devices should use an alternative restart method like gpio-restart to provide reliable restarts. Note that watchdog restarts are not yet exposed, since the _machine_restart override is still present. Signed-off-by: Sander Vanheule <sander@svanheule.net> Tested-by: Stijn Segers <foss@volatilesystems.org> Tested-by: Paul Fertser <fercerpav@gmail.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-11-14 18:45:33 +00:00
CONFIG_WATCHDOG_CORE=y
realtek: copy config/files/patches to 5.10 this patch copies the following files from 5.4 to 5.10: - config-5.4 -> config-5.10 - files-5.4/ -> files-5.10/ - patches-5.4/ -> patches-5.10/ Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [rebase on change in files-5.4] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-05 00:32:27 +00:00
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y
Reference in New Issue Copy Permalink