ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-20 22:23:27 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
c0ca9f90a8
openwrt/target/linux/layerscape/image/Makefile

55 lines
1.5 KiB
Makefile
Raw Normal View History

layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
#
# Copyright (C) 2016 Jiang Yutang <jiangyutang1978@gmail.com>
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
layerscape: add SD card boot support NOR/QSPI Flash on Layerscape board only has limited 64MB memory size. Since some boards (ls1043ardb/ls1046ardb/ls1088ardb/ls1021atwr) could support SD card boot, we added SD boot support for them to put all things on SD card to meet large memory requirement. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-18 06:14:40 +00:00
LS_SD_ROOTFSPART_OFFSET = 64
LS_SD_IMAGE_SIZE = $(shell echo $$((($(LS_SD_ROOTFSPART_OFFSET) + \
$(CONFIG_TARGET_ROOTFS_PARTSIZE)) * 1024 * 1024)))
layerscape: define ls-append function This patch is to define a ls-append function for each device to reuse it for image appending. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-09 10:38:10 +00:00
define Build/ls-clean
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
rm -f $@
endef
layerscape: define ls-append function This patch is to define a ls-append function for each device to reuse it for image appending. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-09 10:38:10 +00:00
define Build/ls-append
dd if=$(STAGING_DIR_IMAGE)/$(1) >> $@
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
endef
layerscape: define ls-append function This patch is to define a ls-append function for each device to reuse it for image appending. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-09 10:38:10 +00:00
define Build/ls-append-dtb
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
$(call Image/BuildDTB,$(DTS_DIR)/$(1).dts,$(DTS_DIR)/$(1).dtb)
dd if=$(DTS_DIR)/$(1).dtb >> $@
endef
layerscape: add SD card boot support NOR/QSPI Flash on Layerscape board only has limited 64MB memory size. Since some boards (ls1043ardb/ls1046ardb/ls1088ardb/ls1021atwr) could support SD card boot, we added SD boot support for them to put all things on SD card to meet large memory requirement. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-18 06:14:40 +00:00
define Build/ls-append-sdhead
./gen_sdcard_head_img.sh $(STAGING_DIR_IMAGE)/$(1)-sdcard-head.img \
$(LS_SD_ROOTFSPART_OFFSET) $(CONFIG_TARGET_ROOTFS_PARTSIZE)
dd if=$(STAGING_DIR_IMAGE)/$(1)-sdcard-head.img >> $@
endef
layerscape: add Traverse LS1043-S support The Traverse LS1043-S board is a router board based on NXP/Freescale's LS1043 SoC, with 4x1GBase-T, 1 SFP and 1 SFP+, as well as miniPCIe and M.2 LTE. Unlike the Layerscape reference boards, the LS1043-S board has NAND flash and uses the mainline U-Boot. This patch implements support for the LS1043-S board, as well as the earlier LS1043-V board. It is our intention that all boards in this family (LS1043-S and later, Five64) will boot the same binary. Not included in this patchset are the hwmon drivers not in the kernel (emc1704,pac1934) or the bootloader. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2018-04-30 12:42:39 +00:00
define Build/traverse-fit
layerscape: split image makefile per subtarget This patch is to split image makefile per subtarget. The ARMv7 subtarget will be added in the future. It will be not convinient if only one makefile is used for several subtargets management and future development. This patch also dropped 32-bit Traverse LS1043-S since Traverse only intended to support 64-bit and the 32-bit compile now had an issue. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-08-15 08:41:41 +00:00
./mkits-multiple-config.sh -o $@.its -A $(LINUX_KARCH) \
-v $(LINUX_VERSION) -k $@ -a $(KERNEL_LOADADDR) \
-e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
layerscape: add Traverse LS1043-S support The Traverse LS1043-S board is a router board based on NXP/Freescale's LS1043 SoC, with 4x1GBase-T, 1 SFP and 1 SFP+, as well as miniPCIe and M.2 LTE. Unlike the Layerscape reference boards, the LS1043-S board has NAND flash and uses the mainline U-Boot. This patch implements support for the LS1043-S board, as well as the earlier LS1043-V board. It is our intention that all boards in this family (LS1043-S and later, Five64) will boot the same binary. Not included in this patchset are the hwmon drivers not in the kernel (emc1704,pac1934) or the bootloader. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2018-04-30 12:42:39 +00:00
-C gzip -c 1 -c 2 \
layerscape: split image makefile per subtarget This patch is to split image makefile per subtarget. The ARMv7 subtarget will be added in the future. It will be not convinient if only one makefile is used for several subtargets management and future development. This patch also dropped 32-bit Traverse LS1043-S since Traverse only intended to support 64-bit and the 32-bit compile now had an issue. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-08-15 08:41:41 +00:00
-d $(DEVICE_DTS_DIR)/freescale/traverse-ls1043s.dtb \
-D "Traverse_LS1043S" -n "ls1043s" -a $(FDT_LOADADDR) -c 1 \
-d $(DEVICE_DTS_DIR)/freescale/traverse-ls1043v.dtb \
-D "Traverse_LS1043V" -n "ls1043v" -a $(FDT_LOADADDR) -c 2
layerscape: add Traverse LS1043-S support The Traverse LS1043-S board is a router board based on NXP/Freescale's LS1043 SoC, with 4x1GBase-T, 1 SFP and 1 SFP+, as well as miniPCIe and M.2 LTE. Unlike the Layerscape reference boards, the LS1043-S board has NAND flash and uses the mainline U-Boot. This patch implements support for the LS1043-S board, as well as the earlier LS1043-V board. It is our intention that all boards in this family (LS1043-S and later, Five64) will boot the same binary. Not included in this patchset are the hwmon drivers not in the kernel (emc1704,pac1934) or the bootloader. Signed-off-by: Mathew McBride <matt@traverse.com.au>
2018-04-30 12:42:39 +00:00
PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
@mv -f $@.new $@
endef
layerscape: rename subtargets and update makefile files Rename subtargets 32b/64b with armv8_32b/armv8_64b which are more proper, and update makefile files. There also will be other subtargets added in the future, like armv7. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-06-29 03:19:07 +00:00
ifeq ($(SUBTARGET),armv8_64b)
layerscape: split image makefile per subtarget This patch is to split image makefile per subtarget. The ARMv7 subtarget will be added in the future. It will be not convinient if only one makefile is used for several subtargets management and future development. This patch also dropped 32-bit Traverse LS1043-S since Traverse only intended to support 64-bit and the 32-bit compile now had an issue. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-08-15 08:41:41 +00:00
include armv8_64b.mk
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
endif
layerscape: add 64b/32b target for ls1012ardb device The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:18:23 +00:00
layerscape: add armv7 subtarget and ls1021atwr board support The NXP TWR-LS1021A module is a development system based on the QorIQ LS1021A processor. - This feature-rich, high-performance processor module can be used standalone or as part of an assembled Tower System development platform. - Incorporating dual Arm Cortex-A7 cores running up to 1 GHz, the TWR-LS1021A delivers an outstanding level of performance. - The TWR-LS1021A offers HDMI, SATA3 and USB3 connectors as well as a complete Linux software developer's package. - The module provides a comprehensive level of security that includes support for secure boot, Trust Architecture and tamper detection in both standby and active power modes, safeguarding the device from manufacture to deployment. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-10 03:58:59 +00:00
ifeq ($(SUBTARGET),armv7)
include armv7.mk
endif
layerscape: add 64b/32b target for ls1043ardb device Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:14:32 +00:00
$(eval $(call BuildImage))
Reference in New Issue Copy Permalink