openwrt/target/linux/d1/patches-6.1/0030-riscv-dts-allwinner-Add-Sipeed-Lichee-RV-devicetrees.patch

345 lines
8.3 KiB
Diff
Raw Normal View History

From 3bf76e93011425ed64a69c462b9959ed2a8ccf46 Mon Sep 17 00:00:00 2001
From: Samuel Holland <samuel@sholland.org>
Date: Wed, 29 Jun 2022 00:13:50 -0500
Subject: [PATCH 030/117] riscv: dts: allwinner: Add Sipeed Lichee RV
devicetrees
Sipeed manufactures a "Lichee RV" system-on-module, which provides a
minimal working system on its own, as well as a few carrier boards. The
"Dock" board provides audio, USB, and WiFi. The "86 Panel" additionally
provides 100M Ethernet and a built-in display panel.
The 86 Panel repurposes the USB ID and VBUS detection GPIOs for its RGB
panel interface, since the USB OTG port is inaccessible inside the case.
Co-developed-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
arch/riscv/boot/dts/allwinner/Makefile | 4 +
.../sun20i-d1-lichee-rv-86-panel-480p.dts | 29 ++++++
.../sun20i-d1-lichee-rv-86-panel-720p.dts | 10 ++
.../sun20i-d1-lichee-rv-86-panel.dtsi | 92 +++++++++++++++++++
.../allwinner/sun20i-d1-lichee-rv-dock.dts | 74 +++++++++++++++
.../dts/allwinner/sun20i-d1-lichee-rv.dts | 84 +++++++++++++++++
6 files changed, 293 insertions(+)
create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-480p.dts
create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-720p.dts
create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel.dtsi
create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv.dts
--- a/arch/riscv/boot/dts/allwinner/Makefile
+++ b/arch/riscv/boot/dts/allwinner/Makefile
@@ -1,2 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-480p.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-720p.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-dock.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-nezha.dtb
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-480p.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
+
+#include "sun20i-d1-lichee-rv-86-panel.dtsi"
+
+/ {
+ model = "Sipeed Lichee RV 86 Panel (480p)";
+ compatible = "sipeed,lichee-rv-86-panel-480p", "sipeed,lichee-rv",
+ "allwinner,sun20i-d1";
+};
+
+&i2c2 {
+ pinctrl-0 = <&i2c2_pb0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ touchscreen@48 {
+ compatible = "focaltech,ft6236";
+ reg = <0x48>;
+ interrupt-parent = <&pio>;
+ interrupts = <6 14 IRQ_TYPE_LEVEL_LOW>; /* PG14 */
+ iovcc-supply = <&reg_vcc_3v3>;
+ reset-gpios = <&pio 6 15 GPIO_ACTIVE_LOW>; /* PG15 */
+ touchscreen-size-x = <480>;
+ touchscreen-size-y = <480>;
+ vcc-supply = <&reg_vcc_3v3>;
+ wakeup-source;
+ };
+};
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-720p.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
+
+#include "sun20i-d1-lichee-rv-86-panel.dtsi"
+
+/ {
+ model = "Sipeed Lichee RV 86 Panel (720p)";
+ compatible = "sipeed,lichee-rv-86-panel-720p", "sipeed,lichee-rv",
+ "allwinner,sun20i-d1";
+};
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel.dtsi
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
+
+#include "sun20i-d1-lichee-rv.dts"
+
+/ {
+ aliases {
+ ethernet0 = &emac;
+ ethernet1 = &xr829;
+ };
+
+ /* PC1 is repurposed as BT_WAKE_AP */
+ /delete-node/ leds;
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&ccu CLK_FANOUT1>;
+ clock-names = "ext_clock";
+ reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
+ assigned-clocks = <&ccu CLK_FANOUT1>;
+ assigned-clock-rates = <32768>;
+ pinctrl-0 = <&clk_pg11_pin>;
+ pinctrl-names = "default";
+ };
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-0 = <&rmii_pe_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&ext_rmii_phy>;
+ phy-mode = "rmii";
+ phy-supply = <&reg_vcc_3v3>;
+ status = "okay";
+};
+
+&mdio {
+ ext_rmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
+ };
+};
+
+&mmc1 {
+ bus-width = <4>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ non-removable;
+ vmmc-supply = <&reg_vcc_3v3>;
+ vqmmc-supply = <&reg_vcc_3v3>;
+ pinctrl-0 = <&mmc1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ xr829: wifi@1 {
+ reg = <1>;
+ };
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pio {
+ clk_pg11_pin: clk-pg11-pin {
+ pins = "PG11";
+ function = "clk";
+ };
+};
+
+&uart1 {
+ uart-has-rtscts;
+ pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ /* XR829 bluetooth is connected here */
+};
+
+&usb_otg {
+ status = "disabled";
+};
+
+&usbphy {
+ /* PD20 and PD21 are repurposed for the LCD panel */
+ /delete-property/ usb0_id_det-gpios;
+ /delete-property/ usb0_vbus_det-gpios;
+ usb1_vbus-supply = <&reg_vcc>;
+};
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Jisheng Zhang <jszhang@kernel.org>
+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
+
+#include <dt-bindings/input/input.h>
+
+#include "sun20i-d1-lichee-rv.dts"
+
+/ {
+ model = "Sipeed Lichee RV Dock";
+ compatible = "sipeed,lichee-rv-dock", "sipeed,lichee-rv",
+ "allwinner,sun20i-d1";
+
+ aliases {
+ ethernet1 = &rtl8723ds;
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
+ };
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&lradc {
+ status = "okay";
+
+ button-220 {
+ label = "OK";
+ linux,code = <KEY_OK>;
+ channel = <0>;
+ voltage = <220000>;
+ };
+};
+
+&mmc1 {
+ bus-width = <4>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ non-removable;
+ vmmc-supply = <&reg_vcc_3v3>;
+ vqmmc-supply = <&reg_vcc_3v3>;
+ pinctrl-0 = <&mmc1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ rtl8723ds: wifi@1 {
+ reg = <1>;
+ };
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&uart1 {
+ uart-has-rtscts;
+ pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ bluetooth {
+ compatible = "realtek,rtl8723ds-bt";
+ device-wake-gpios = <&pio 6 15 GPIO_ACTIVE_HIGH>; /* PG16 */
+ enable-gpios = <&pio 6 18 GPIO_ACTIVE_HIGH>; /* PG18 */
+ host-wake-gpios = <&pio 6 17 GPIO_ACTIVE_HIGH>; /* PG17 */
+ };
+};
+
+&usbphy {
+ usb1_vbus-supply = <&reg_vcc>;
+};
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Jisheng Zhang <jszhang@kernel.org>
+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+#include "sun20i-d1.dtsi"
+#include "sun20i-d1-common-regulators.dtsi"
+
+/ {
+ model = "Sipeed Lichee RV";
+ compatible = "sipeed,lichee-rv", "allwinner,sun20i-d1";
+
+ aliases {
+ mmc0 = &mmc0;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&pio 2 1 GPIO_ACTIVE_HIGH>; /* PC1 */
+ };
+ };
+
+ reg_vdd_cpu: vdd-cpu {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-cpu";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ vin-supply = <&reg_vcc>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&reg_vdd_cpu>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&mmc0 {
+ broken-cd;
+ bus-width = <4>;
+ disable-wp;
+ vmmc-supply = <&reg_vcc_3v3>;
+ vqmmc-supply = <&reg_vcc_3v3>;
+ pinctrl-0 = <&mmc0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-0 = <&uart0_pb8_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ usb0_id_det-gpios = <&pio 3 21 GPIO_ACTIVE_HIGH>; /* PD21 */
+ usb0_vbus_det-gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
+ usb0_vbus-supply = <&reg_vcc>;
+ status = "okay";
+};