2014-06-19 14:13:38 +00:00
|
|
|
#
|
2015-09-15 16:05:03 +00:00
|
|
|
# Copyright (C) 2010-2015 OpenWrt.org
|
2014-06-19 14:13:38 +00:00
|
|
|
#
|
|
|
|
|
imx6: Add support for Toradex Apalis family of CoMs
This patch adds support for the following computer on modules (CoM) from
Toradex[A]:
Apalis iMX6 Quad 2GB IT - i.MX 6Quad 800MHz, 2GB DDR3, 4GB eMMC
-40° to +85° C Temp
Apalis iMX6 Quad 1GB - i.MX 6Quad 1GHz, 1GB DDR3, 4GB eMMC
0° to +70° C Temp
Apalis iMX6 Dual 1GB IT - i.MX 6Dual 800MHz, 1GB DDR3, 4GB eMMC
-40° to +85° C Temp
Apalis iMX6 Dual 512MB - i.MX 6Dual 1GHz, 512MB DDR3, 4GB eMMC
0° to +70° C Temp
I've developed and tested it on Quad 2GB IT v1.1A and Dual 512MB v1.1A
CoMs, using Ixora[B] carrier board v1.0A, but it should hopefuly work on
Eval[C] board as well.
A. https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-freescale-imx-6
B. https://www.toradex.com/products/carrier-board/ixora-carrier-board
C. https://www.toradex.com/products/carrier-board/apalis-evaluation-board
Flashing/recovery instructions:
1. Download and compile imx_loader for OpenWrt from
https://github.com/ynezz/imx_loader
2. Enter recovery mode as desribed in
https://developer.toradex.com/knowledge-base/imx-recovery-mode
3. Connect board via USB to the host computer, check that it's connected
by lsusb:
15a2:0054 Freescale Semiconductor, Inc. i.MX 6Dual/6Quad SystemOnChip
in RecoveryMode
4. Copy following OpenWrt images to imx_loader directory:
SPL
u-boot.img
u-boot-with-spl.imx
openwrt-imx6-apalis-recovery.scr
openwrt-imx6-apalis-squashfs.combined.bin
5. Run imx_usb in imx_loader directory
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2018-11-23 09:33:24 +00:00
|
|
|
. /lib/imx6.sh
|
|
|
|
|
|
|
|
RAMFS_COPY_BIN='blkid'
|
|
|
|
|
|
|
|
enable_image_metadata_check() {
|
|
|
|
case "$(board_name)" in
|
|
|
|
apalis*)
|
|
|
|
REQUIRE_IMAGE_METADATA=1
|
|
|
|
;;
|
|
|
|
esac
|
|
|
|
}
|
|
|
|
enable_image_metadata_check
|
|
|
|
|
|
|
|
apalis_copy_config() {
|
|
|
|
apalis_mount_boot
|
|
|
|
cp -af "$CONF_TAR" /boot/
|
|
|
|
sync
|
|
|
|
umount /boot
|
|
|
|
}
|
|
|
|
|
|
|
|
apalis_do_upgrade() {
|
|
|
|
local board_name=$(board_name)
|
|
|
|
board_name=${board_name/,/_}
|
|
|
|
|
|
|
|
apalis_mount_boot
|
|
|
|
get_image "$1" | tar Oxf - sysupgrade-${board_name}/kernel > /boot/uImage
|
|
|
|
get_image "$1" | tar Oxf - sysupgrade-${board_name}/root > $(rootpart_from_uuid)
|
|
|
|
sync
|
|
|
|
umount /boot
|
|
|
|
}
|
|
|
|
|
2014-06-19 14:13:38 +00:00
|
|
|
platform_check_image() {
|
2017-05-12 20:36:07 +00:00
|
|
|
local board=$(board_name)
|
2014-06-19 14:13:38 +00:00
|
|
|
|
|
|
|
case "$board" in
|
imx6: Add support for Toradex Apalis family of CoMs
This patch adds support for the following computer on modules (CoM) from
Toradex[A]:
Apalis iMX6 Quad 2GB IT - i.MX 6Quad 800MHz, 2GB DDR3, 4GB eMMC
-40° to +85° C Temp
Apalis iMX6 Quad 1GB - i.MX 6Quad 1GHz, 1GB DDR3, 4GB eMMC
0° to +70° C Temp
Apalis iMX6 Dual 1GB IT - i.MX 6Dual 800MHz, 1GB DDR3, 4GB eMMC
-40° to +85° C Temp
Apalis iMX6 Dual 512MB - i.MX 6Dual 1GHz, 512MB DDR3, 4GB eMMC
0° to +70° C Temp
I've developed and tested it on Quad 2GB IT v1.1A and Dual 512MB v1.1A
CoMs, using Ixora[B] carrier board v1.0A, but it should hopefuly work on
Eval[C] board as well.
A. https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-freescale-imx-6
B. https://www.toradex.com/products/carrier-board/ixora-carrier-board
C. https://www.toradex.com/products/carrier-board/apalis-evaluation-board
Flashing/recovery instructions:
1. Download and compile imx_loader for OpenWrt from
https://github.com/ynezz/imx_loader
2. Enter recovery mode as desribed in
https://developer.toradex.com/knowledge-base/imx-recovery-mode
3. Connect board via USB to the host computer, check that it's connected
by lsusb:
15a2:0054 Freescale Semiconductor, Inc. i.MX 6Dual/6Quad SystemOnChip
in RecoveryMode
4. Copy following OpenWrt images to imx_loader directory:
SPL
u-boot.img
u-boot-with-spl.imx
openwrt-imx6-apalis-recovery.scr
openwrt-imx6-apalis-squashfs.combined.bin
5. Run imx_usb in imx_loader directory
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2018-11-23 09:33:24 +00:00
|
|
|
apalis*)
|
|
|
|
return 0
|
|
|
|
;;
|
2015-10-10 12:35:02 +00:00
|
|
|
*gw5*)
|
2014-06-19 14:13:38 +00:00
|
|
|
nand_do_platform_check $board $1
|
|
|
|
return $?;
|
|
|
|
;;
|
|
|
|
esac
|
|
|
|
|
|
|
|
echo "Sysupgrade is not yet supported on $board."
|
|
|
|
return 1
|
|
|
|
}
|
2015-09-15 16:05:03 +00:00
|
|
|
|
2017-12-18 19:32:18 +00:00
|
|
|
platform_do_upgrade() {
|
2017-05-12 20:36:07 +00:00
|
|
|
local board=$(board_name)
|
2015-09-15 16:05:03 +00:00
|
|
|
|
|
|
|
case "$board" in
|
imx6: Add support for Toradex Apalis family of CoMs
This patch adds support for the following computer on modules (CoM) from
Toradex[A]:
Apalis iMX6 Quad 2GB IT - i.MX 6Quad 800MHz, 2GB DDR3, 4GB eMMC
-40° to +85° C Temp
Apalis iMX6 Quad 1GB - i.MX 6Quad 1GHz, 1GB DDR3, 4GB eMMC
0° to +70° C Temp
Apalis iMX6 Dual 1GB IT - i.MX 6Dual 800MHz, 1GB DDR3, 4GB eMMC
-40° to +85° C Temp
Apalis iMX6 Dual 512MB - i.MX 6Dual 1GHz, 512MB DDR3, 4GB eMMC
0° to +70° C Temp
I've developed and tested it on Quad 2GB IT v1.1A and Dual 512MB v1.1A
CoMs, using Ixora[B] carrier board v1.0A, but it should hopefuly work on
Eval[C] board as well.
A. https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-freescale-imx-6
B. https://www.toradex.com/products/carrier-board/ixora-carrier-board
C. https://www.toradex.com/products/carrier-board/apalis-evaluation-board
Flashing/recovery instructions:
1. Download and compile imx_loader for OpenWrt from
https://github.com/ynezz/imx_loader
2. Enter recovery mode as desribed in
https://developer.toradex.com/knowledge-base/imx-recovery-mode
3. Connect board via USB to the host computer, check that it's connected
by lsusb:
15a2:0054 Freescale Semiconductor, Inc. i.MX 6Dual/6Quad SystemOnChip
in RecoveryMode
4. Copy following OpenWrt images to imx_loader directory:
SPL
u-boot.img
u-boot-with-spl.imx
openwrt-imx6-apalis-recovery.scr
openwrt-imx6-apalis-squashfs.combined.bin
5. Run imx_usb in imx_loader directory
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2018-11-23 09:33:24 +00:00
|
|
|
apalis*)
|
|
|
|
apalis_do_upgrade "$1"
|
|
|
|
;;
|
2015-10-10 12:35:02 +00:00
|
|
|
*gw5*)
|
2015-09-15 16:05:03 +00:00
|
|
|
nand_do_upgrade "$1"
|
|
|
|
;;
|
|
|
|
esac
|
|
|
|
}
|
imx6: Add support for Toradex Apalis family of CoMs
This patch adds support for the following computer on modules (CoM) from
Toradex[A]:
Apalis iMX6 Quad 2GB IT - i.MX 6Quad 800MHz, 2GB DDR3, 4GB eMMC
-40° to +85° C Temp
Apalis iMX6 Quad 1GB - i.MX 6Quad 1GHz, 1GB DDR3, 4GB eMMC
0° to +70° C Temp
Apalis iMX6 Dual 1GB IT - i.MX 6Dual 800MHz, 1GB DDR3, 4GB eMMC
-40° to +85° C Temp
Apalis iMX6 Dual 512MB - i.MX 6Dual 1GHz, 512MB DDR3, 4GB eMMC
0° to +70° C Temp
I've developed and tested it on Quad 2GB IT v1.1A and Dual 512MB v1.1A
CoMs, using Ixora[B] carrier board v1.0A, but it should hopefuly work on
Eval[C] board as well.
A. https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-freescale-imx-6
B. https://www.toradex.com/products/carrier-board/ixora-carrier-board
C. https://www.toradex.com/products/carrier-board/apalis-evaluation-board
Flashing/recovery instructions:
1. Download and compile imx_loader for OpenWrt from
https://github.com/ynezz/imx_loader
2. Enter recovery mode as desribed in
https://developer.toradex.com/knowledge-base/imx-recovery-mode
3. Connect board via USB to the host computer, check that it's connected
by lsusb:
15a2:0054 Freescale Semiconductor, Inc. i.MX 6Dual/6Quad SystemOnChip
in RecoveryMode
4. Copy following OpenWrt images to imx_loader directory:
SPL
u-boot.img
u-boot-with-spl.imx
openwrt-imx6-apalis-recovery.scr
openwrt-imx6-apalis-squashfs.combined.bin
5. Run imx_usb in imx_loader directory
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2018-11-23 09:33:24 +00:00
|
|
|
|
|
|
|
platform_copy_config() {
|
|
|
|
local board=$(board_name)
|
|
|
|
|
|
|
|
case "$board" in
|
|
|
|
apalis*)
|
|
|
|
apalis_copy_config
|
|
|
|
;;
|
|
|
|
esac
|
|
|
|
}
|
2019-05-13 14:42:41 +00:00
|
|
|
|
|
|
|
platform_pre_upgrade() {
|
|
|
|
local board=$(board_name)
|
|
|
|
|
|
|
|
case "$board" in
|
|
|
|
apalis*)
|
|
|
|
[ "$SAVE_CONFIG" -eq 0 ] && {
|
|
|
|
jffs2reset -y
|
|
|
|
umount /overlay
|
|
|
|
}
|
|
|
|
;;
|
|
|
|
esac
|
|
|
|
}
|