ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-30 10:39:04 +00:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity
bad2f9c4dc
openwrt/target/linux/ar71xx/image/nand.mk

124 lines
4.1 KiB
Makefile
Raw Normal View History

ar71xx: add support for the Airtight C-60 This patch adds support for the Airtight C-60. SOC: Atheros AR9344 rev 2 (CPU:560.000MHz) RAM: 128 MiB NOR: MX25L3205D 4MiB NAND: ST Micro NAND 32MiB 3,3V 8-bit SW-NET: AR8327N (2 Ports) WLAN1: Dual-Band AR9340 Rev:2 (built-in SoC) WLAN2: Dual-Band AR9300 Rev:4 PCIe Chip The switch is setup for an accesspoint: LAN1: (gigabit) is the wan-port. LAN2: (fast ethernet) is bridged with the br-lan. Flashing Guide (via initramfs): 1. Connect a PC to the serial port of the C-60. power up the C-60. Enter u-boot command prompt: #> nand erase #> setenv bootcmd "bootm 0x9f060000" #> saveenv #> setenv ipaddr 192.168.1.1 #> setenv netmask 255.255.255.0 #> setenv serverip 192.168.1.100 #> setenv bootfile lede-ar71xx-nand-c-60-initramfs-kernel.bin #> tftpboot #> bootm 2. Wait for the C-60 to boot LEDE. On the root prompt. Enter: # ubiformat /dev/mtd4 # ubiattach -p /dev/mtd4 3. After that copy the sysupgrade.tar onto the router and run: # sysupgrade sysupgrade.tar to flash the image. Special thanks to Chris Blake <chrisrblake93@gmail.com>. He provided a C-60 unit and he helped with debugging the switch, LEDs and platfrom support. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-10-05 12:53:11 +00:00
define Device/c-60
DEVICE_TITLE := AirTight C-60
DEVICE_PACKAGES := kmod-spi-gpio kmod-usb-core kmod-usb2 kmod-ath9k
BOARDNAME = C-60
BLOCKSIZE := 64k
KERNEL_SIZE = 3648k
IMAGE_SIZE = 32m
IMAGES := sysupgrade.tar
MTDPARTS = spi0.0:256k(u-boot)ro,128k(u-boot-env)ro,3648k(kernel),64k(art)ro;ar934x-nfc:32m(ubi)
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma
IMAGE/sysupgrade.tar := sysupgrade-tar
endef
TARGET_DEVICES += c-60
ar71xx: move DomyWifi DW33D to nand subtarget This device uses NAND FLASH, so it should be kept in nand subtarget. Also, inlcude in packages kmod-usb-ledtrig-usbport instead of obsolete kmod-ledtrig-usbdev. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-11-23 15:34:31 +00:00
define Device/domywifi-dw33d
DEVICE_TITLE := DomyWifi DW33D
ar71xx: Add ath10k-firmware-qca988x for DomyWifi DW33D The default package selection was missing the correct FW for ath10k to work. Signed-off-by: Jing Lin <mumuqz@163.com>
2016-12-12 07:10:22 +00:00
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage kmod-usb-ledtrig-usbport kmod-ath10k ath10k-firmware-qca988x
ar71xx: move DomyWifi DW33D to nand subtarget This device uses NAND FLASH, so it should be kept in nand subtarget. Also, inlcude in packages kmod-usb-ledtrig-usbport instead of obsolete kmod-ledtrig-usbdev. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-11-23 15:34:31 +00:00
BOARDNAME = DW33D
IMAGE_SIZE = 16000k
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware);ar934x-nfc:96m(rootfs_data),32m(backup)ro
IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | pad-to 14528k | append-kernel | check-size $$$$(IMAGE_SIZE)
endef
TARGET_DEVICES += domywifi-dw33d
ar71xx: add support for Aerohive AP-121 This adds support for Aerohive AP-121 access point. Specification: - SoC: Atheros AR9344-BC2A at 560MHz - WiFi 1: 2.4GHz Atheros AR9340? - SoC - WiFi 2: 5.0GHz Atheros AR9382-AL1A - Memory: 128MB from 2x Nanya NT5TU32M16DG-AC - SPI: 1MB Macronix MX25L8006E - NAND: 128MB Hynix H27U1G8F2BTR-BC - Ethernet: Atheros AR8035-A - USB: 1x 2.0 - TPM: Atmel SC3204 Flashing: 1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter a password of administrator or AhNf?d@ta06 if prompted. 2. Once in U-Boot, download and flash LEDE factory image over tftp: dhcp; setenv serverip tftp-server-ip; tftpboot 0x81000000 lede-ar71xx-nand-hiveap-121-squashfs-factory.bin; nand erase 0x800000 0x800000; nand write 0x81000000 0x800000 0x800000; reset; Signed-off-by: Chris Blake <chrisrblake93@gmail.com> [minor text changes in commit subject and description, fixed alphabetical order in etc/diag.sh, use only model name in lib/ar71xx.sh, fixed code style issues in mach-hiveap-121.c, ubinized factory image] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-04-27 03:09:27 +00:00
define Device/hiveap-121
DEVICE_TITLE := Aerohive HiveAP-121
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-i2c-gpio-custom kmod-spi-gpio kmod-ath9k kmod-tpm-i2c-atmel
BOARDNAME = HiveAP-121
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 115m
KERNEL_SIZE := 5120k
UBINIZE_OPTS := -E 5
CONSOLE = ttyS0,9600
MTDPARTS = spi0.0:512k(u-boot)ro,64k(u-boot-env),64k(hw-info)ro,64k(boot-info)ro,64k(boot-sinfo)ro;ar934x-nfc:4096k(u-boot-1),4096k(u-boot-env-1),5m(kernel),111m(ubi),4096k(wifi-info)ro
IMAGES := sysupgrade.tar factory.bin
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.tar := sysupgrade-tar
endef
TARGET_DEVICES += hiveap-121
ar71xx: move nand device image definitions to a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:10:54 +00:00
define Build/MerakiNAND
-$(STAGING_DIR_HOST)/bin/mkmerakifw \
-B $(BOARDNAME) -s \
-i $@ \
-o $@.new
@mv $@.new $@
endef
define Device/mr18
ar71xx: merge profiles into image building code - Remove old style device profiles and convert them to device definitions within the image building code - Fix the legacy build macros for the changed eval depth in the legacy image build wrapper Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-17 04:53:22 +00:00
DEVICE_TITLE := Meraki MR18
DEVICE_PACKAGES := kmod-spi-gpio kmod-ath9k
ar71xx: move nand device image definitions to a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:10:54 +00:00
BOARDNAME = MR18
BLOCKSIZE := 64k
MTDPARTS = ar934x-nfc:512k(nandloader)ro,8M(kernel),8M(recovery),113664k(ubi),128k@130944k(odm-caldata)ro
IMAGES := sysupgrade.tar
KERNEL := kernel-bin | patch-cmdline | MerakiNAND
KERNEL_INITRAMFS := kernel-bin | patch-cmdline | MerakiNAND
build: rename sysupgrade-nand to sysupgrade-tar Now that the "sysupgrade-nand" step is used by non-NAND targets as well, rename it to "sysupgrade-tar" to make it more generic. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-07-29 13:05:51 +00:00
IMAGE/sysupgrade.tar := sysupgrade-tar
ar71xx: move nand device image definitions to a separate file Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 21:10:54 +00:00
endef
TARGET_DEVICES += mr18
ar71xx: fix nand device profile Signed-off-by: John Crispin <john@phrozen.org>
2016-07-05 07:07:16 +00:00
ar71xx: add support for Cisco Meraki Z1 Cloud Managed Teleworker Gateway This patch adds support for Cisco's Z1. Detailed instructions for the flashing the device can be found in the OpenWrt wiki: <https://wiki.openwrt.org/toh/meraki/z1> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2016-09-20 12:14:29 +00:00
define Build/MerakiNAND-old
-$(STAGING_DIR_HOST)/bin/mkmerakifw-old \
-B $(BOARDNAME) -s \
-i $@ \
-o $@.new
@mv $@.new $@
endef
ar71xx: add support for 8devices Rambutan development board Rambutan is a Wifi module based on QCA9550/9557 http://www.8devices.com/products/rambutan This commit adds basic support for Rambutan development kit Specification: - 720/600/200 MHz (CPU/DDR/AHB) - 128 MB of DDR2 RAM - 128 MB of NAND Flash - 1x 100Mbps Ethernet - 1x 1000Mbps Ethernet (PHY on dev-kit) - 1x Wifi radio 2x2 MIMO, dualband 2.4 and 5 GHz - 2x U.FL connectors on module, chip antennas on dev-kit - 1x miniPCIe slot - 1x USB2.0 host socket + 1x USB2.0 pins on 2.54mm header Flash instructions: Stock firmware is OpenWrt, so use: sysupgrade -n /tmp/lede-ar71xx-nand-rambutan-squashfs-sysupgrade.tar or upgarde from GUI (don't save config) Use factory image to flash from U-Boot: tftpboot 80060000 lede-ar71xx-nand-rambutan-squashfs-factory.ubi nand erase.part ubi nand write 80060000 ubi ${filesize} Signed-off-by: Mantas Pucka <mantas@8devices.com> [split support in uboot-envtools package into a separate commit, fixed alphabetical order in lib/preinit/05_set_iface_mac_ar71xx] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-05-08 10:28:38 +00:00
define Device/rambutan
DEVICE_TITLE := 8devices Rambutan
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME = RAMBUTAN
BLOCKSIZE = 128KiB
MTDPARTS = ar934x-nfc:3M(u-boot)ro,2M(u-boot-env),1M(art),122M(ubi)
PAGESIZE := 2048
KERNEL_IN_UBI := 1
IMAGES := factory.ubi sysupgrade.tar
IMAGE/sysupgrade.tar := sysupgrade-tar
IMAGE/factory.ubi := append-ubi
endef
TARGET_DEVICES += rambutan
ar71xx: add support for Cisco Meraki Z1 Cloud Managed Teleworker Gateway This patch adds support for Cisco's Z1. Detailed instructions for the flashing the device can be found in the OpenWrt wiki: <https://wiki.openwrt.org/toh/meraki/z1> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2016-09-20 12:14:29 +00:00
define Device/z1
DEVICE_TITLE := Meraki Z1
switch to the new usbport LED trigger This makes init.d script handle existing UCI entries using the new trigger. It also switches all targets to use its package. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-19 10:09:45 +00:00
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-spi-gpio kmod-ath9k kmod-owl-loader
ar71xx: add support for Cisco Meraki Z1 Cloud Managed Teleworker Gateway This patch adds support for Cisco's Z1. Detailed instructions for the flashing the device can be found in the OpenWrt wiki: <https://wiki.openwrt.org/toh/meraki/z1> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2016-09-20 12:14:29 +00:00
BOARDNAME = Z1
BLOCKSIZE := 64k
MTDPARTS = ar934x-nfc:128K(loader1)ro,8064K(kernel),128K(loader2)ro,8064K(recovery),114560K(ubi),128K(origcaldata)ro
IMAGES := sysupgrade.tar
KERNEL := kernel-bin | patch-cmdline | MerakiNAND-old
KERNEL_INITRAMFS := kernel-bin | patch-cmdline | MerakiNAND-old
IMAGE/sysupgrade.tar := sysupgrade-tar
endef
TARGET_DEVICES += z1
ar71xx: fix nand device profile Signed-off-by: John Crispin <john@phrozen.org>
2016-07-05 07:07:16 +00:00
define LegacyDevice/R6100
ar71xx: fix more image build code whitespace/tab issues Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 11:49:01 +00:00
DEVICE_TITLE := NETGEAR R6100
ar71xx: add ath10k driver and firmware for Netgear R6100 to firmware image A Netgear R6100 owner reported the LEDE images lack the ath10k driver and firmware [1]. This patch adds both to the R6100 image. [1] https://forum.lede-project.org/t/netgear-r6100-5ghz-wifi-not-working-after-initial-install/2222 Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
2017-03-10 17:58:26 +00:00
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
ar71xx: fix nand device profile Signed-off-by: John Crispin <john@phrozen.org>
2016-07-05 07:07:16 +00:00
endef
LEGACY_DEVICES += R6100
ar71xx: fix WNDR4300v1 / WNDR3700v4 build (FS#56) Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 11:52:12 +00:00
define LegacyDevice/WNDR3700V4
DEVICE_TITLE := NETGEAR WNDR3700v4
switch to the new usbport LED trigger This makes init.d script handle existing UCI entries using the new trigger. It also switches all targets to use its package. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-19 10:09:45 +00:00
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
ar71xx: fix nand device profile Signed-off-by: John Crispin <john@phrozen.org>
2016-07-05 07:07:16 +00:00
endef
ar71xx: fix WNDR4300v1 / WNDR3700v4 build (FS#56) Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 11:52:12 +00:00
LEGACY_DEVICES += WNDR3700V4
define LegacyDevice/WNDR4300V1
DEVICE_TITLE := NETGEAR WNDR4300v1
switch to the new usbport LED trigger This makes init.d script handle existing UCI entries using the new trigger. It also switches all targets to use its package. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-19 10:09:45 +00:00
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
ar71xx: fix WNDR4300v1 / WNDR3700v4 build (FS#56) Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 11:52:12 +00:00
endef
LEGACY_DEVICES += WNDR4300V1
ar71xx: fix nand device profile Signed-off-by: John Crispin <john@phrozen.org>
2016-07-05 07:07:16 +00:00
define LegacyDevice/NBG6716
ar71xx: fix more image build code whitespace/tab issues Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 11:49:01 +00:00
DEVICE_TITLE := Zyxel NBG 6716
ar71xx: add ath10k firmware to profile defaults where ath10k is used Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-22 13:57:49 +00:00
DEVICE_PACKAGES := kmod-rtc-pcf8563 kmod-ath10k ath10k-firmware-qca988x
ar71xx: fix nand device profile Signed-off-by: John Crispin <john@phrozen.org>
2016-07-05 07:07:16 +00:00
endef
LEGACY_DEVICES += NBG6716
Reference in New Issue Copy Permalink