ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-01-27 22:59:53 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
openwrt/target/linux/oxnas/Makefile

22 lines
416 B
Makefile
Raw Normal View History

oxnas: bring in new oxnas target Reboot the oxnas target based on Linux 4.14 by rebasing our support on top of the now-existing upstream kernel support. This commit brings oxnas support to the level of v4.17 having upstream drivers for Ethernet, Serial and NAND flash. Botch up OpenWrt's local drivers for EHCI, SATA and PCIe based on the new platform code and device-tree. Re-introduce base-files from old oxnas target which works for now but needs further clean-up towards generic board support. Functional issues: * PCIe won't come up (hence no USB3 on Shuttle KD20) * I2C bus of Akitio myCloud device is likely not to work (missing debounce support in new pinctrl driver) Code-style issues: * plla/pllb needs further cleanup -- currently their users or writing into the syscon regmap after acquireling the clk instead of using defined clk_*_*() functions to setup multipliers and dividors. * PCIe phy needs its own little driver. * SATA driver is a monster and should be split into an mfd having a raidctrl regmap, sata controller, sata ports and sata phy. Tested on MitraStar STG-212 aka. Medion Akoya MD86xxx and Shuttle KD20. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-05-31 19:41:28 +02:00
include $(TOPDIR)/rules.mk
ARCH:=arm
BOARD:=oxnas
BOARDNAME:=PLXTECH/Oxford NAS782x/OX8xx
SUBTARGETS:=ox810se ox820
FEATURES:=gpio ramdisk rtc squashfs
DEVICE_TYPE:=nas
oxnas: switch to Linux 5.10 Linux 5.10 has been there as testing kernel for a while now. Do the switch and drop config and patches for Linux 5.4. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-10-09 16:44:01 +01:00
KERNEL_PATCHVER:=5.10
oxnas: add testing support for Linux 5.15 Rebase patches and port SATA driver to work with Linux > 5.13. Tested on Shuttle KD-20. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-09-11 02:31:21 +01:00
KERNEL_TESTING_PATCHVER:=5.15
oxnas: bring in new oxnas target Reboot the oxnas target based on Linux 4.14 by rebasing our support on top of the now-existing upstream kernel support. This commit brings oxnas support to the level of v4.17 having upstream drivers for Ethernet, Serial and NAND flash. Botch up OpenWrt's local drivers for EHCI, SATA and PCIe based on the new platform code and device-tree. Re-introduce base-files from old oxnas target which works for now but needs further clean-up towards generic board support. Functional issues: * PCIe won't come up (hence no USB3 on Shuttle KD20) * I2C bus of Akitio myCloud device is likely not to work (missing debounce support in new pinctrl driver) Code-style issues: * plla/pllb needs further cleanup -- currently their users or writing into the syscon regmap after acquireling the clk instead of using defined clk_*_*() functions to setup multipliers and dividors. * PCIe phy needs its own little driver. * SATA driver is a monster and should be split into an mfd having a raidctrl regmap, sata controller, sata ports and sata phy. Tested on MitraStar STG-212 aka. Medion Akoya MD86xxx and Shuttle KD20. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-05-31 19:41:28 +02:00
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += \
kmod-button-hotplug kmod-input-gpio-keys-polled \
kernel: drop empty kmod-ledtrig-* packages The following four led triggers are enabled in generic config. * kmod-ledtrig-default-on * kmod-ledtrig-heartbeat * kmod-ledtrig-netdev * kmod-ledtrig-timer Drop the packages and remove them from DEVICE_PACKAGES. There's no other package depending on them in this repo. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2021-01-04 22:52:20 +09:00
kmod-leds-gpio uboot-envtools
oxnas: bring in new oxnas target Reboot the oxnas target based on Linux 4.14 by rebasing our support on top of the now-existing upstream kernel support. This commit brings oxnas support to the level of v4.17 having upstream drivers for Ethernet, Serial and NAND flash. Botch up OpenWrt's local drivers for EHCI, SATA and PCIe based on the new platform code and device-tree. Re-introduce base-files from old oxnas target which works for now but needs further clean-up towards generic board support. Functional issues: * PCIe won't come up (hence no USB3 on Shuttle KD20) * I2C bus of Akitio myCloud device is likely not to work (missing debounce support in new pinctrl driver) Code-style issues: * plla/pllb needs further cleanup -- currently their users or writing into the syscon regmap after acquireling the clk instead of using defined clk_*_*() functions to setup multipliers and dividors. * PCIe phy needs its own little driver. * SATA driver is a monster and should be split into an mfd having a raidctrl regmap, sata controller, sata ports and sata phy. Tested on MitraStar STG-212 aka. Medion Akoya MD86xxx and Shuttle KD20. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-05-31 19:41:28 +02:00
KERNELNAME:=zImage dtbs
$(eval $(call BuildTarget))
Reference in New Issue Copy Permalink