openwrt/target/linux/ath79/dts/qca9531_glinet_gl-ar300m16.dts

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "qca9531_glinet_gl-ar300m.dtsi"

/ {
	compatible = "glinet,gl-ar300m16", "qca,qca9531";
	model = "GL.iNet GL-AR300M16";
};

/delete-node/ &nand_flash;

&nor_firmware {
	compatible = "denx,uimage";
	label = "firmware";
};
ath79: add GL.iNet GL-AR300M16 as NOR-only board The GL.iNet GL-AR300M series of devices includes variants without NAND and only the 16 MB NOR flash. These include the GL-AR300M16 and the GL-AR300M-Lite (already with its own board name). This board-name addition provides disambiguation from the NAND-bearing GL-AR300M devices, both for OpenWrt code and for end users. Kernel and firmware support for NAND and UBI will add ~320 kB to the overall firmware size at this time. This NOR-only option continues to provide more compact firmware for both the GL-AR300M16 as well as those who wish to use it as an alternate or primary, NOR-resident firmware on the GL-AR300M. The ar71xx targets are unmodified. Installation ------------ Install through OEM U-Boot (HTTP-based) or `sysupgrade --force` when booted from NOR and running OEM or OpenWrt, NOR-based firmware. As one of the intentions is disambiguation from NAND-bearing units, users who have flashed this firmware onto a device with NAND would need to use U-Boot or `sysupgrade --force` to flash firmware that again supports NAND. There are no additional SUPPORTED_DEVICES as it is not possible to determine if a device does or does not have NAND based on either the OEM's or OpenWrt's board names prior to this patch. Signed-off-by: Jeff Kletsky <git-commits@allycomm.com> 2019-06-02 06:43:00 -07:00			`// SPDX-License-Identifier: GPL-2.0-or-later OR MIT`

			`#include "qca9531_glinet_gl-ar300m.dtsi"`

			`/ {`
			`compatible = "glinet,gl-ar300m16", "qca,qca9531";`
			`model = "GL.iNet GL-AR300M16";`
			`};`

			`/delete-node/ &nand_flash;`
ath79: fix firmware partition attributes for GL-AR300M16 and -Lite During the introduction of the ath79/nand images for the GL-AR300M series the firmware partition label and compatible were altered, but the necessary adjustments have not been made for the GL-AR300M16 and the GL-AR300M-Lite. This will result in a non-bootable partition setup for these devices. This patch adds the necessary definitions to those two devices. Fixes: 55e6c903ae20 ("ath79: GL-AR300M: provide NAND support; increase to 4 MB kernel") Fixes: b591cabd3989 ("ath79: add GL.iNet GL-AR300M16 as NOR-only board") Signed-off-by: Jeff Kletsky <git-commits@allycomm.com> [extend commit message, alter commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> 2019-11-15 08:51:43 -08:00
			`&nor_firmware {`
			`compatible = "denx,uimage";`
			`label = "firmware";`
			`};`