openwrt/package/kernel/qca-nss-dp/patches/0013-nss_dp_main-Use-a-phy-handle-property-to-connect-to-.patch

From 8293a26ca56ee2e9a88e4efb5dcc7f647803cd8c Mon Sep 17 00:00:00 2001
From: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Date: Sun, 5 Jun 2022 21:45:09 -0500
Subject: [PATCH] nss_dp_main: Use a 'phy-handle' property to connect to the
 PHY

The original method of connecting a PHY to the ethernet controller
requires the "qcom,link-poll", and "qcom,phy-mdio-addr" devicetree
properties. This is redundant. The PHY node already contains the MDIO
address, and attaching a PHY implies "link-poll".

Allow using a "phy-handle" property. Remove the following properties,
as they are no longer used:
    * "qcom,link-poll"
    * "qcom,phy-mdio-addr"
    * "mdio-bus"
    * "qcom,forced-speed"
    * "qcom,forced-duplex"

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
---
 include/nss_dp_dev.h |  5 +--
 nss_dp_main.c        | 91 +++++---------------------------------------
 2 files changed, 10 insertions(+), 86 deletions(-)

--- a/include/nss_dp_dev.h
+++ b/include/nss_dp_dev.h
@@ -100,13 +100,10 @@ struct nss_dp_dev {
 	unsigned long drv_flags;	/* Driver specific feature flags */
 
 	/* Phy related stuff */
+	struct device_node *phy_node;
 	struct phy_device *phydev;	/* Phy device */
 	struct mii_bus *miibus;		/* MII bus */
 	phy_interface_t phy_mii_type;	/* RGMII/SGMII/QSGMII */
-	uint32_t phy_mdio_addr;		/* Mdio address */
-	bool link_poll;			/* Link polling enable? */
-	uint32_t forced_speed;		/* Forced speed? */
-	uint32_t forced_duplex;		/* Forced duplex? */
 	uint32_t link_state;		/* Current link state */
 	uint32_t pause;			/* Current flow control settings */
 
--- a/nss_dp_main.c
+++ b/nss_dp_main.c
@@ -399,7 +399,7 @@ static int nss_dp_open(struct net_device
 
 	netif_start_queue(netdev);
 
-	if (!dp_priv->link_poll) {
+	if (!dp_priv->phydev) {
 		/* Notify data plane link is up */
 		if (dp_priv->data_plane_ops->link_state(dp_priv->dpc, 1)) {
 			netdev_dbg(netdev, "Data plane set link failed\n");
@@ -576,6 +576,8 @@ static int32_t nss_dp_of_get_pdata(struc
 		return -EFAULT;
 	}
 
+	dp_priv->phy_node = of_parse_phandle(np, "phy-handle", 0);
+
 	if (of_property_read_u32(np, "qcom,mactype", &hal_pdata->mactype)) {
 		pr_err("%s: error reading mactype\n", np->name);
 		return -EFAULT;
@@ -594,16 +596,6 @@ static int32_t nss_dp_of_get_pdata(struc
 #else
 	of_get_phy_mode(np, &dp_priv->phy_mii_type);
 #endif
-	dp_priv->link_poll = of_property_read_bool(np, "qcom,link-poll");
-	if (of_property_read_u32(np, "qcom,phy-mdio-addr",
-		&dp_priv->phy_mdio_addr) && dp_priv->link_poll) {
-		pr_err("%s: mdio addr required if link polling is enabled\n",
-				np->name);
-		return -EFAULT;
-	}
-
-	of_property_read_u32(np, "qcom,forced-speed", &dp_priv->forced_speed);
-	of_property_read_u32(np, "qcom,forced-duplex", &dp_priv->forced_duplex);
 
 	ret = of_get_mac_address(np, maddr);
 	if (!ret && is_valid_ether_addr(maddr)) {
@@ -636,50 +628,6 @@ static int32_t nss_dp_of_get_pdata(struc
 	return 0;
 }
 
-/*
- * nss_dp_mdio_attach()
- */
-static struct mii_bus *nss_dp_mdio_attach(struct platform_device *pdev)
-{
-	struct device_node *mdio_node;
-	struct platform_device *mdio_plat;
-	struct ipq40xx_mdio_data *mdio_data;
-
-	/*
-	 * Find mii_bus using "mdio-bus" handle.
-	 */
-	mdio_node = of_parse_phandle(pdev->dev.of_node, "mdio-bus", 0);
-	if (mdio_node) {
-		return of_mdio_find_bus(mdio_node);
-	}
-
-	mdio_node = of_find_compatible_node(NULL, NULL, "qcom,qca-mdio");
-	if (!mdio_node) {
-		mdio_node = of_find_compatible_node(NULL, NULL,
-							"qcom,ipq40xx-mdio");
-		if (!mdio_node) {
-			dev_err(&pdev->dev, "cannot find mdio node by phandle\n");
-			return NULL;
-		}
-	}
-
-	mdio_plat = of_find_device_by_node(mdio_node);
-	if (!mdio_plat) {
-		dev_err(&pdev->dev, "cannot find platform device from mdio node\n");
-		of_node_put(mdio_node);
-		return NULL;
-	}
-
-	mdio_data = dev_get_drvdata(&mdio_plat->dev);
-	if (!mdio_data) {
-		dev_err(&pdev->dev, "cannot get mii bus reference from device data\n");
-		of_node_put(mdio_node);
-		return NULL;
-	}
-
-	return mdio_data->mii_bus;
-}
-
 #ifdef CONFIG_NET_SWITCHDEV
 /*
  * nss_dp_is_phy_dev()
@@ -738,7 +686,6 @@ static int32_t nss_dp_probe(struct platf
 	struct device_node *np = pdev->dev.of_node;
 	struct nss_gmac_hal_platform_data gmac_hal_pdata;
 	int32_t ret = 0;
-	uint8_t phy_id[MII_BUS_ID_SIZE + 3];
 #if defined(NSS_DP_PPE_SUPPORT)
 	uint32_t vsi_id;
 	fal_port_t port_id;
@@ -813,37 +760,17 @@ static int32_t nss_dp_probe(struct platf
 
 	dp_priv->drv_flags |= NSS_DP_PRIV_FLAG(INIT_DONE);
 
-	if (dp_priv->link_poll) {
-		dp_priv->miibus = nss_dp_mdio_attach(pdev);
-		if (!dp_priv->miibus) {
-			netdev_dbg(netdev, "failed to find miibus\n");
-			goto phy_setup_fail;
-		}
-		snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
-				dp_priv->miibus->id, dp_priv->phy_mdio_addr);
-
+	if (dp_priv->phy_node) {
 		SET_NETDEV_DEV(netdev, &pdev->dev);
-
-		dp_priv->phydev = phy_connect(netdev, phy_id,
-				&nss_dp_adjust_link,
-				dp_priv->phy_mii_type);
-		if (IS_ERR(dp_priv->phydev)) {
-			netdev_dbg(netdev, "failed to connect to phy device\n");
+		dp_priv->phydev = of_phy_connect(netdev, dp_priv->phy_node,
+						 &nss_dp_adjust_link, 0,
+						 dp_priv->phy_mii_type);
+		if (!(dp_priv->phydev)) {
+			dev_err(&pdev->dev, "Could not attach to PHY\n");
 			goto phy_setup_fail;
 		}
 
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(4, 5, 0))
-		dp_priv->phydev->advertising |=
-			(ADVERTISED_Pause | ADVERTISED_Asym_Pause);
-		dp_priv->phydev->supported |=
-			(SUPPORTED_Pause | SUPPORTED_Asym_Pause);
-#else
-		linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, dp_priv->phydev->advertising);
-		linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, dp_priv->phydev->advertising);
-
-		linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, dp_priv->phydev->supported);
-		linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, dp_priv->phydev->supported);
-#endif
+		phy_attached_info(dp_priv->phydev);
 	}
 
 #if defined(NSS_DP_PPE_SUPPORT)