openwrt/target/linux/brcm63xx/patches-3.10/553-boards_probe_switch.patch

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -627,6 +627,8 @@ static struct board_info __initdata boar
 	.has_uart0			= 1,
 	.has_enet0			= 1,
 	.enet0 = {
+		.has_phy		= 1,
+		.phy_id			= 0,
 		.force_speed_100	= 1,
 		.force_duplex_full	= 1,
 	},
@@ -670,6 +672,8 @@ static struct board_info __initdata boar
 	.has_uart0			= 1,
 	.has_enet0			= 1,
 	.enet0 = {
+		.has_phy		= 1,
+		.phy_id			= 0,
 		.force_speed_100	= 1,
 		.force_duplex_full	= 1,
 	},
@@ -955,6 +959,8 @@ static struct board_info __initdata boar
 		.use_internal_phy	= 1,
 	},
 	.enet1 = {
+		.has_phy		= 1,
+		.phy_id			= 0,
 		.force_speed_100	= 1,
 		.force_duplex_full	= 1,
 	},
@@ -1027,6 +1033,8 @@ static struct board_info __initdata boar
 	},
 
 	.enet1 = {
+		.has_phy		= 1,
+		.phy_id			= 0,
 		.force_speed_100	= 1,
 		.force_duplex_full	= 1,
 	},
@@ -1256,6 +1264,8 @@ static struct board_info __initdata boar
 		.use_internal_phy	= 1,
 	},
 	.enet1 = {
+		.has_phy		= 1,
+		.phy_id			= 0,
 		.force_speed_100	= 1,
 		.force_duplex_full	= 1,
 	},
@@ -1431,6 +1441,8 @@ static struct board_info __initdata boar
 	},
 
 	.enet1 = {
+		.has_phy		= 1,
+		.phy_id			= 0,
 		.force_speed_100	= 1,
 		.force_duplex_full	= 1,
 	},
@@ -1621,6 +1633,8 @@ static struct board_info __initdata boar
 		.use_internal_phy	= 1,
 	},
 	.enet1 = {
+		.has_phy		= 1,
+		.phy_id			= 0,
 		.force_speed_100	= 1,
 		.force_duplex_full	= 1,
 	},
@@ -1642,6 +1656,8 @@ static struct board_info __initdata boar
 		.use_internal_phy	= 1,
 	},
 	.enet1 = {
+		.has_phy		= 1,
+		.phy_id			= 0,
 		.force_speed_100	= 1,
 		.force_duplex_full	= 1,
 	},
@@ -1661,6 +1677,8 @@ static struct board_info __initdata boar
 		.use_internal_phy	= 1,
 	},
 	.enet1 = {
+		.has_phy		= 1,
+		.phy_id			= 0,
 		.force_speed_100	= 1,
 		.force_duplex_full	= 1,
 	},
@@ -2036,6 +2054,8 @@ static struct board_info __initdata boar
 	},
 
 	.enet1 = {
+		.has_phy		= 1,
+		.phy_id			= 0,
 		.force_speed_100	= 1,
 		.force_duplex_full	= 1,
 	},
@@ -2088,6 +2108,8 @@ static struct board_info __initdata boar
 	},
 
 	.enet1 = {
+		.has_phy		= 1,
+		.phy_id			= 0,
 		.force_speed_100	= 1,
 		.force_duplex_full	= 1,
 	},
@@ -2229,6 +2251,8 @@ static struct board_info __initdata boar
 	},
 
 	.enet1 = {
+		.has_phy		= 1,
+		.phy_id			= 0,
 		.force_speed_100	= 1,
 		.force_duplex_full	= 1,
 	},
@@ -2346,6 +2370,8 @@ static struct board_info __initdata boar
 	},
 
 	.enet1 = {
+		.has_phy		= 1,
+		.phy_id			= 0,
 		.force_speed_100	= 1,
 		.force_duplex_full	= 1,
 	},
brcm63xx: add linux 3.10 support Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37481 2013-07-20 11:30:26 +00:00			`--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c`
			`+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c`
brcm63xx: set usb host port number for some devices Update a few devices with their actual port numbers, especially those with two ports. Should allow properly using the second port on the Neufboxen and HW553 and HW556. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39325 2014-01-19 13:46:25 +00:00			`@@ -627,6 +627,8 @@ static struct board_info __initdata boar`
brcm63xx: add linux 3.10 support Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37481 2013-07-20 11:30:26 +00:00			`.has_uart0 = 1,`
			`.has_enet0 = 1,`
			`.enet0 = {`
			`+ .has_phy = 1,`
			`+ .phy_id = 0,`
			`.force_speed_100 = 1,`
			`.force_duplex_full = 1,`
			`},`
brcm63xx: set usb host port number for some devices Update a few devices with their actual port numbers, especially those with two ports. Should allow properly using the second port on the Neufboxen and HW553 and HW556. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39325 2014-01-19 13:46:25 +00:00			`@@ -670,6 +672,8 @@ static struct board_info __initdata boar`
brcm63xx: add linux 3.10 support Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37481 2013-07-20 11:30:26 +00:00			`.has_uart0 = 1,`
			`.has_enet0 = 1,`
			`.enet0 = {`
			`+ .has_phy = 1,`
			`+ .phy_id = 0,`
			`.force_speed_100 = 1,`
			`.force_duplex_full = 1,`
			`},`
brcm63xx: set usb host port number for some devices Update a few devices with their actual port numbers, especially those with two ports. Should allow properly using the second port on the Neufboxen and HW553 and HW556. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39325 2014-01-19 13:46:25 +00:00			`@@ -955,6 +959,8 @@ static struct board_info __initdata boar`
brcm63xx: add linux 3.10 support Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37481 2013-07-20 11:30:26 +00:00			`.use_internal_phy = 1,`
			`},`
			`.enet1 = {`
			`+ .has_phy = 1,`
			`+ .phy_id = 0,`
			`.force_speed_100 = 1,`
			`.force_duplex_full = 1,`
			`},`
brcm63xx: set usb host port number for some devices Update a few devices with their actual port numbers, especially those with two ports. Should allow properly using the second port on the Neufboxen and HW553 and HW556. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39325 2014-01-19 13:46:25 +00:00			`@@ -1027,6 +1033,8 @@ static struct board_info __initdata boar`
brcm63xx: add linux 3.10 support Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37481 2013-07-20 11:30:26 +00:00			`},`

			`.enet1 = {`
			`+ .has_phy = 1,`
			`+ .phy_id = 0,`
			`.force_speed_100 = 1,`
			`.force_duplex_full = 1,`
			`},`
brcm63xx: set usb host port number for some devices Update a few devices with their actual port numbers, especially those with two ports. Should allow properly using the second port on the Neufboxen and HW553 and HW556. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39325 2014-01-19 13:46:25 +00:00			`@@ -1256,6 +1264,8 @@ static struct board_info __initdata boar`
brcm63xx: add linux 3.10 support Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37481 2013-07-20 11:30:26 +00:00			`.use_internal_phy = 1,`
			`},`
			`.enet1 = {`
			`+ .has_phy = 1,`
			`+ .phy_id = 0,`
			`.force_speed_100 = 1,`
			`.force_duplex_full = 1,`
			`},`
brcm63xx: set usb host port number for some devices Update a few devices with their actual port numbers, especially those with two ports. Should allow properly using the second port on the Neufboxen and HW553 and HW556. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39325 2014-01-19 13:46:25 +00:00			`@@ -1431,6 +1441,8 @@ static struct board_info __initdata boar`
brcm63xx: add linux 3.10 support Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37481 2013-07-20 11:30:26 +00:00			`},`

			`.enet1 = {`
			`+ .has_phy = 1,`
			`+ .phy_id = 0,`
			`.force_speed_100 = 1,`
			`.force_duplex_full = 1,`
			`},`
brcm63xx: fix up borked patch Fix up patch borked by quilt fuzzy application of patches. SVN-Revision: 41294 2014-06-21 19:23:18 +00:00			`@@ -1621,6 +1633,8 @@ static struct board_info __initdata boar`
brcm63xx: add linux 3.10 support Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37481 2013-07-20 11:30:26 +00:00			`.use_internal_phy = 1,`
			`},`
			`.enet1 = {`
			`+ .has_phy = 1,`
			`+ .phy_id = 0,`
brcm63xx: fix up borked patch Fix up patch borked by quilt fuzzy application of patches. SVN-Revision: 41294 2014-06-21 19:23:18 +00:00			`.force_speed_100 = 1,`
			`.force_duplex_full = 1,`
			`},`
			`@@ -1642,6 +1656,8 @@ static struct board_info __initdata boar`
			`.use_internal_phy = 1,`
			`},`
			`.enet1 = {`
brcm63xx: add linux 3.10 support Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37481 2013-07-20 11:30:26 +00:00			`+ .has_phy = 1,`
			`+ .phy_id = 0,`
brcm63xx: fix up borked patch Fix up patch borked by quilt fuzzy application of patches. SVN-Revision: 41294 2014-06-21 19:23:18 +00:00			`.force_speed_100 = 1,`
			`.force_duplex_full = 1,`
			`},`
			`@@ -1661,6 +1677,8 @@ static struct board_info __initdata boar`
			`.use_internal_phy = 1,`
			`},`
			`.enet1 = {`
brcm63xx: add linux 3.10 support Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37481 2013-07-20 11:30:26 +00:00			`+ .has_phy = 1,`
			`+ .phy_id = 0,`
			`.force_speed_100 = 1,`
			`.force_duplex_full = 1,`
			`},`
brcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL router This adds kernel support support for Sagemcom F@st 2704 wireless ADSL router. It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+ modem equipped with 64 MiB RAM and 8 MiB flash. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4266/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39671 2014-02-22 11:16:30 +00:00			`@@ -2036,6 +2054,8 @@ static struct board_info __initdata boar`
brcm63xx: add linux 3.10 support Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37481 2013-07-20 11:30:26 +00:00			`},`

			`.enet1 = {`
			`+ .has_phy = 1,`
			`+ .phy_id = 0,`
			`.force_speed_100 = 1,`
			`.force_duplex_full = 1,`
			`},`
brcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL router This adds kernel support support for Sagemcom F@st 2704 wireless ADSL router. It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+ modem equipped with 64 MiB RAM and 8 MiB flash. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/4266/ Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39671 2014-02-22 11:16:30 +00:00			`@@ -2088,6 +2108,8 @@ static struct board_info __initdata boar`
brcm63xx: add linux 3.10 support Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37481 2013-07-20 11:30:26 +00:00			`},`

			`.enet1 = {`
			`+ .has_phy = 1,`
			`+ .phy_id = 0,`
			`.force_speed_100 = 1,`
			`.force_duplex_full = 1,`
			`},`
brcm63xx: fix RG100A/DB120 usb port number Set usbh ports to 2 to fix #15007. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39681 2014-02-22 11:16:52 +00:00			`@@ -2229,6 +2251,8 @@ static struct board_info __initdata boar`
brcm63xx: add linux 3.10 support Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37481 2013-07-20 11:30:26 +00:00			`},`

			`.enet1 = {`
			`+ .has_phy = 1,`
			`+ .phy_id = 0,`
			`.force_speed_100 = 1,`
			`.force_duplex_full = 1,`
			`},`
brcm63xx: fix RG100A/DB120 usb port number Set usbh ports to 2 to fix #15007. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 39681 2014-02-22 11:16:52 +00:00			`@@ -2346,6 +2370,8 @@ static struct board_info __initdata boar`
brcm63xx: add linux 3.10 support Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 37481 2013-07-20 11:30:26 +00:00			`},`

			`.enet1 = {`
			`+ .has_phy = 1,`
			`+ .phy_id = 0,`
			`.force_speed_100 = 1,`
			`.force_duplex_full = 1,`
			`},`