openwrt/target/linux/bcm27xx/patches-5.15/950-0599-dtoverlays-Add-a-generic-DPI-panel-overlay-for-KMS.patch

From 208d270a7b613e5593390d38a9fba8bd248c5928 Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Thu, 2 Dec 2021 18:06:37 +0000
Subject: [PATCH] dtoverlays: Add a generic DPI panel overlay for KMS

Uses the "panel-dpi" compatible to set panel timings from
DT.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 arch/arm/boot/dts/overlays/Makefile           |  1 +
 arch/arm/boot/dts/overlays/README             | 28 ++++++
 .../overlays/vc4-kms-dpi-generic-overlay.dts  | 92 +++++++++++++++++++
 3 files changed, 121 insertions(+)
 create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-dpi-generic-overlay.dts

--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -232,6 +232,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	vc4-fkms-v3d.dtbo \
 	vc4-fkms-v3d-pi4.dtbo \
 	vc4-kms-dpi-at056tn53v1.dtbo \
+	vc4-kms-dpi-generic.dtbo \
 	vc4-kms-dsi-7inch.dtbo \
 	vc4-kms-dsi-lt070me05000.dtbo \
 	vc4-kms-dsi-lt070me05000-v2.dtbo \
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -3563,6 +3563,34 @@ Load:   dtoverlay=vc4-kms-dpi-at056tn53v
 Params: <None>
 
 
+Name:   vc4-kms-dpi-generic
+Info:   Enable a generic DPI display under KMS. Default timings are for the
+        Adafruit Kippah with 800x480 panel and RGB666 (GPIOs 0-21)
+        Requires vc4-kms-v3d to be loaded.
+Load:   dtoverlay=vc4-kms-dpi-generic,<param>=<val>
+Params: clock-frequency         Display clock frequency (Hz)
+        hactive                 Horizontal active pixels
+        hfp                     Horizontal front porch
+        hsync                   Horizontal sync pulse width
+        hbp                     Horizontal back porch
+        vactive                 Vertical active lines
+        vfp                     Vertical front porch
+        vsync                   Vertical sync pulse width
+        vbp                     Vertical back porch
+        hsync-invert            Horizontal sync active low
+        vsync-invert            Vertical sync active low
+        de-invert               Data Enable active low
+        pixclk-invert           Negative edge pixel clock
+        width-mm                Define the screen width in mm
+        height-mm               Define the screen height in mm
+        rgb565                  Change to RGB565 output on GPIOs 0-19
+        rgb666-padhi            Change to RGB666 output on GPIOs 0-9, 12-17, and
+                                20-25
+        rgb888                  Change to RGB888 output on GPIOs 0-27
+        bus-format              Override the bus format for a MEDIA_BUS_FMT_*
+                                value. NB also overridden by rgbXXX overrides.
+
+
 Name:   vc4-kms-dsi-7inch
 Info:   Enable the Raspberry Pi DSI 7" screen.
         Includes the edt-ft5406 for the touchscreen element.
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/vc4-kms-dpi-generic-overlay.dts
@@ -0,0 +1,92 @@
+/*
+ * vc4-kms-dpi-at056tn53v1-overlay.dts
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/bcm2835.h>
+
+/ {
+	compatible = "brcm,bcm2835";
+
+	fragment@0 {
+		target-path = "/";
+		__overlay__ {
+			panel: panel {
+				compatible = "panel-dpi";
+
+				width-mm = <154>;
+				height-mm = <83>;
+				bus-format = <0x1009>;
+
+				timing: panel-timing {
+					clock-frequency = <29500000>;
+					hactive = <800>;
+					hfront-porch = <24>;
+					hsync-len = <72>;
+					hback-porch = <96>;
+					hsync-active = <0>;
+					vactive = <480>;
+					vfront-porch = <3>;
+					vsync-len = <10>;
+					vback-porch = <7>;
+					vsync-active = <0>;
+
+					de-active = <1>;
+					pixelclk-active = <1>;
+				};
+
+				port {
+					panel_in: endpoint {
+						remote-endpoint = <&dpi_out>;
+					};
+				};
+			};
+		};
+	};
+
+	fragment@1 {
+		target = <&dpi>;
+		dpi_node: __overlay__  {
+			status = "okay";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&dpi_18bit_gpio0>;
+
+			port {
+				dpi_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
+	__overrides__ {
+		clock-frequency = <&timing>, "clock-frequency:0";
+		hactive = <&timing>, "hactive:0";
+		hfp = <&timing>, "hfront-porch:0";
+		hsync = <&timing>, "hsync-len:0";
+		hbp = <&timing>, "hback-porch:0";
+		vactive = <&timing>, "vactive:0";
+		vfp = <&timing>, "vfront-porch:0";
+		vsync = <&timing>, "vsync-len:0";
+		vbp = <&timing>, "vback-porch:0";
+		hsync-invert = <&timing>, "hsync-active:0=0";
+		vsync-invert = <&timing>, "vsync-active:0=0";
+		de-invert = <&timing>, "de-active:0=0";
+		pixclk-invert = <&timing>, "pixelclk-active:0=0";
+
+		width-mm = <&panel>, "width-mm:0";
+		height-mm = <&panel>, "height-mm:0";
+
+		rgb565 = <&panel>, "bus-format:0=0x1017",
+			<&dpi_node>, "pinctrl-0:0=",<&dpi_16bit_gpio0>;
+		rgb666-padhi = <&panel>, "bus-format:0=0x1015",
+			<&dpi_node>, "pinctrl-0:0=",<&dpi_18bit_cpadhi_gpio0>;
+		rgb888 = <&panel>, "bus-format:0=0x100a",
+			<&dpi_node>, "pinctrl-0:0=",<&dpi_gpio0>;
+		bus-format = <&panel>, "bus-format:0";
+	};
+};