openwrt/target/linux/brcm2708/patches-3.18/0048-BCM2708-Migrate-to-the-Common-Clock-Framework.patch

From 466743ec93a99240c1a5a04d65f490fd8370fbc3 Mon Sep 17 00:00:00 2001
From: notro <notro@tronnes.org>
Date: Sun, 6 Jul 2014 12:09:30 +0200
Subject: [PATCH 048/114] BCM2708: Migrate to the Common Clock Framework

As part of moving towards using Device Tree, the Common Clock Framework
has to be used instead of the BCM2708 clock implementation.

Selecting COMMON_CLK removes the need to set CLKDEV_LOOKUP and HAVE_CLK explicitly.

CONFIG_ARCH_BCM2708_CHIPIT #ifdef's are removed. They are no longer in use.

Signed-off-by: Noralf Tronnes <notro@tronnes.org>
---
 arch/arm/Kconfig                |  3 +-
 arch/arm/mach-bcm2708/Makefile  |  2 +-
 arch/arm/mach-bcm2708/bcm2708.c | 79 +++++++++++++++++------------------------
 arch/arm/mach-bcm2708/clock.c   | 61 -------------------------------
 arch/arm/mach-bcm2708/clock.h   | 24 -------------
 5 files changed, 34 insertions(+), 135 deletions(-)
 delete mode 100644 arch/arm/mach-bcm2708/clock.c
 delete mode 100644 arch/arm/mach-bcm2708/clock.h

--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -385,11 +385,10 @@ config ARCH_BCM2708
 	bool "Broadcom BCM2708 family"
 	select CPU_V6
 	select ARM_AMBA
-	select HAVE_CLK
 	select HAVE_SCHED_CLOCK
 	select NEED_MACH_GPIO_H
 	select NEED_MACH_MEMORY_H
-	select CLKDEV_LOOKUP
+	select COMMON_CLK
 	select ARCH_HAS_CPUFREQ
 	select GENERIC_CLOCKEVENTS
 	select ARM_ERRATA_411920
--- a/arch/arm/mach-bcm2708/Makefile
+++ b/arch/arm/mach-bcm2708/Makefile
@@ -2,6 +2,6 @@
 # Makefile for the linux kernel.
 #
 
-obj-$(CONFIG_MACH_BCM2708) 	+= clock.o bcm2708.o armctrl.o vcio.o power.o dma.o
+obj-$(CONFIG_MACH_BCM2708) 	+= bcm2708.o armctrl.o vcio.o power.o dma.o
 obj-$(CONFIG_BCM2708_GPIO)	+= bcm2708_gpio.o
 obj-$(CONFIG_BCM2708_VCMEM)	+= vc_mem.o
--- a/arch/arm/mach-bcm2708/bcm2708.c
+++ b/arch/arm/mach-bcm2708/bcm2708.c
@@ -27,6 +27,8 @@
 #include <linux/interrupt.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
 #include <linux/clockchips.h>
 #include <linux/cnt32_to_63.h>
 #include <linux/io.h>
@@ -58,7 +60,6 @@
 
 #include "bcm2708.h"
 #include "armctrl.h"
-#include "clock.h"
 
 #ifdef CONFIG_BCM_VC_CMA
 #include <linux/broadcom/vc_cma.h>
@@ -84,7 +85,7 @@
 
 /* command line parameters */
 static unsigned boardrev, serial;
-static unsigned uart_clock;
+static unsigned uart_clock = UART0_CLOCK;
 static unsigned disk_led_gpio = 16;
 static unsigned disk_led_active_low = 1;
 static unsigned reboot_part = 0;
@@ -196,51 +197,39 @@ static void __init bcm2708_clocksource_i
 	}
 }
 
+struct clk __init *bcm2708_clk_register(const char *name, unsigned long fixed_rate)
+{
+	struct clk *clk;
 
-/*
- * These are fixed clocks.
- */
-static struct clk ref24_clk = {
-	.rate = UART0_CLOCK,	/* The UART is clocked at 3MHz via APB_CLK */
-};
+	clk = clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT,
+						fixed_rate);
+	if (IS_ERR(clk))
+		pr_err("%s not registered\n", name);
 
-static struct clk osc_clk = {
-#ifdef CONFIG_ARCH_BCM2708_CHIPIT
-	.rate = 27000000,
-#else
-	.rate = 500000000,	/* ARM clock is set from the VideoCore booter */
-#endif
-};
+	return clk;
+}
 
-/* warning - the USB needs a clock > 34MHz */
+void __init bcm2708_register_clkdev(struct clk *clk, const char *name)
+{
+	int ret;
 
-static struct clk sdhost_clk = {
-#ifdef CONFIG_ARCH_BCM2708_CHIPIT
-	.rate = 4000000,	/* 4MHz */
-#else
-	.rate = 250000000,	/* 250MHz */
-#endif
-};
+	ret = clk_register_clkdev(clk, NULL, name);
+	if (ret)
+		pr_err("%s alias not registered\n", name);
+}
 
-static struct clk_lookup lookups[] = {
-	{			/* UART0 */
-	 .dev_id = "dev:f1",
-	 .clk = &ref24_clk,
-	 },
-	{			/* USB */
-	 .dev_id = "bcm2708_usb",
-	 .clk = &osc_clk,
-	 }, {	/* SPI */
-		 .dev_id = "bcm2708_spi.0",
-		 .clk = &sdhost_clk,
-	 }, {	/* BSC0 */
-		 .dev_id = "bcm2708_i2c.0",
-		 .clk = &sdhost_clk,
-	 }, {	/* BSC1 */
-		 .dev_id = "bcm2708_i2c.1",
-		 .clk = &sdhost_clk,
-	 }
-};
+void __init bcm2708_init_clocks(void)
+{
+	struct clk *clk;
+
+	clk = bcm2708_clk_register("uart0_clk", uart_clock);
+	bcm2708_register_clkdev(clk, "dev:f1");
+
+	clk = bcm2708_clk_register("sdhost_clk", 250000000);
+	bcm2708_register_clkdev(clk, "bcm2708_spi.0");
+	bcm2708_register_clkdev(clk, "bcm2708_i2c.0");
+	bcm2708_register_clkdev(clk, "bcm2708_i2c.1");
+}
 
 #define UART0_IRQ	{ IRQ_UART, 0 /*NO_IRQ*/ }
 #define UART0_DMA	{ 15, 14 }
@@ -755,11 +744,7 @@ void __init bcm2708_init(void)
 	printk("bcm2708.uart_clock = %d\n", uart_clock);
 	pm_power_off = bcm2708_power_off;
 
-	if (uart_clock)
-		lookups[0].clk->rate = uart_clock;
-
-	for (i = 0; i < ARRAY_SIZE(lookups); i++)
-		clkdev_add(&lookups[i]);
+	bcm2708_init_clocks();
 
 	bcm_register_device(&bcm2708_dmaman_device);
 	bcm_register_device(&bcm2708_vcio_device);
--- a/arch/arm/mach-bcm2708/clock.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- *  linux/arch/arm/mach-bcm2708/clock.c
- *
- *  Copyright (C) 2010 Broadcom
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-
-#include <asm/clkdev.h>
-
-#include "clock.h"
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	return clk->rate;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	return -EIO;
-}
-EXPORT_SYMBOL(clk_set_rate);
--- a/arch/arm/mach-bcm2708/clock.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- *  linux/arch/arm/mach-bcm2708/clock.h
- *
- *  Copyright (C) 2010 Broadcom
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-struct module;
-
-struct clk {
-	unsigned long		rate;
-};