openwrt/target/linux/ath79/dts/qca9561_tplink_archer-c25-v1.dts

198 lines
3.4 KiB
Plaintext
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca956x.dtsi"
/ {
compatible = "tplink,archer-c25-v1", "qca,qca9561";
model = "TP-Link Archer C25 v1";
led_spi {
compatible = "spi-gpio";
#address-cells = <1>;
#size-cells = <0>;
sck-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
mosi-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
cs-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
num-chipselects = <1>;
/* can be removed on 4.19 */
gpio-sck = <&gpio 15 GPIO_ACTIVE_HIGH>;
gpio-mosi = <&gpio 14 GPIO_ACTIVE_HIGH>;
led_gpio: led_gpio@0 {
compatible = "fairchild,74hc595";
reg = <0>;
gpio-controller;
#gpio-cells = <2>;
registers-number = <1>;
spi-max-frequency = <10000000>;
};
};
keys {
compatible = "gpio-keys";
wifi_button {
label = "WiFi button";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
reset_button {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
};
aliases {
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
leds {
compatible = "gpio-leds";
power: power {
label = "tp-link:green:power";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wps {
label = "tp-link:green:wps";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
wlan2g {
label = "tp-link:green:wlan2g";
gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wlan5g {
label = "tp-link:green:wlan5g";
gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wan_green {
label = "tp-link:green:wan";
gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
};
wan_amber {
label = "tp-link:amber:wan";
gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
};
lan1 {
label = "tp-link:green:lan1";
gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "tp-link:green:lan2";
gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
};
lan3 {
label = "tp-link:green:lan3";
gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
};
lan4 {
label = "tp-link:green:lan4";
gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
};
};
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "factory-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
label = "u-boot";
reg = <0x020000 0x010000>;
read-only;
};
partition@30000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x030000 0x7a0000>;
};
config: partition@7d0000 {
label = "config";
reg = <0x7d0000 0x010000>;
read-only;
};
info: partition@7e0000 {
label = "info";
reg = <0x7e0000 0x010000>;
read-only;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
};
};
};
};
&uart {
status = "okay";
};
&pcie {
status = "okay";
};
&eth0 {
phy-mode = "mii";
phy-handle = <&swphy4>;
status = "okay";
mtd-mac-address = <&info 0x8>;
};
&eth1 {
status = "okay";
mtd-mac-address = <&info 0x8>;
mtd-mac-address-increment = <1>;
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&info 0x8>;
};