openwrt/target/linux/ramips/dts/WSR-1166.dts

150 lines
2.6 KiB
Plaintext
Raw Normal View History

/dts-v1/;
/include/ "mt7621.dtsi"
/ {
compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
model = "Buffalo WSR-1166DHP";
memory@0 {
reg = <0x0 0x8000000>;
};
chosen {
bootargs = "console=ttyS0,57600";
};
palmbus@1E000000 {
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mx25l12805d";
reg = <0 0>;
linux,modalias = "m25p80";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x6b0000>;
};
partition@f700000 {
label = "usercfg";
reg = <0x700000 0x100000>;
};
};
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
ralink,function = "gpio";
};
};
};
gpio-leds {
compatible = "gpio-leds";
internet_g {
label = "buffalo:green:internet";
gpios = <&gpio1 9 1>;
};
router_g {
label = "buffalo:green:router";
gpios = <&gpio1 10 1>;
};
router_o {
label = "buffalo:orange:router";
gpios = <&gpio1 11 1>;
};
internet_o {
label = "buffalo:orange:internet";
gpios = <&gpio1 12 1>;
};
wifi_o {
label = "buffalo:orange:wifi";
gpios = <&gpio1 13 1>;
};
power {
label = "buffalo:green:power";
gpios = <&gpio0 14 1>;
};
diag {
label = "buffalo:orange:diag";
gpios = <&gpio1 15 1>;
};
wifi_g {
label = "buffalo:green:wifi";
gpios = <&gpio1 16 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
power {
label = "power";
gpios = <&gpio0 18 1>;
linux,code = <0x74>;
};
reset {
label = "reset";
gpios = <&gpio0 3 1>;
linux,code = <0x198>;
};
aoss {
label = "aoss";
gpios = <&gpio0 6 1>;
linux,code = <0x211>;
};
auto {
label = "mode";
gpios = <&gpio0 7 0>;
linux,code = <0x100>;
linux,input-type = <5>; /* EV_SW */
};
ap {
label = "ap";
gpios = <&gpio0 10 0>;
linux,code = <0x100>;
linux,input-type = <5>; /* EV_SW */
};
router {
label = "router";
gpios = <&gpio0 12 0>;
linux,code = <0x100>;
linux,input-type = <5>; /* EV_SW */
};
};
gpio_poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio0 0 1>;
};
};