openwrt/target/linux/mvebu/patches-6.6/320-arm-dts-armada-370-synology-ds213j-mtd-parts.patch

135 lines
3.2 KiB
Diff
Raw Normal View History

--- a/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts
@@ -31,6 +31,7 @@
chosen {
stdout-path = "serial0:115200n8";
+ append-rootblock = "nullparameter="; /* override the bootloader args */
};
memory@0 {
@@ -94,6 +95,8 @@
status = "okay";
phy = <&phy1>;
phy-mode = "sgmii";
+ nvmem-cells = <&macaddr_vendor_0>;
+ nvmem-cell-names = "mac-address";
};
sata@a0000 {
@@ -175,6 +178,24 @@
gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
};
};
+
+ virtual_flash {
+ compatible = "mtd-concat";
+
+ devices = <&mtd_kernel &mtd_gap &mtd_gap2>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ compatible = "openwrt,uimage", "denx,uimage";
+ label = "firmware";
+ reg = <0x0 0x0>;
+ };
+ };
+ };
};
&mdio {
@@ -265,48 +286,52 @@
reg = <0>; /* Chip select 0 */
spi-max-frequency = <20000000>;
- /*
- * Warning!
- *
- * Synology u-boot uses its compiled-in environment
- * and it seems Synology did not care to change u-boot
- * default configuration in order to allow saving a
- * modified environment at a sensible location. So,
- * if you do a 'saveenv' under u-boot, your modified
- * environment will be saved at 1MB after the start
- * of the flash, i.e. in the middle of the uImage.
- * For that reason, it is strongly advised not to
- * change the default environment, unless you know
- * what you are doing.
- */
- partition@0 { /* u-boot */
- label = "RedBoot";
- reg = <0x00000000 0x000c0000>; /* 768KB */
- };
+ partitions {
+ compatible = "fixed-partitions";
- partition@c0000 { /* uImage */
- label = "zImage";
- reg = <0x000c0000 0x002d0000>; /* 2880KB */
- };
+ partition@0 { /* u-boot */
+ label = "u-boot";
+ reg = <0x00000000 0x000c0000>; /* 768KB */
+ read-only;
+ };
- partition@390000 { /* uInitramfs */
- label = "rd.gz";
- reg = <0x00390000 0x00440000>; /* 4250KB */
- };
+ mtd_gap: partition@c0000 { /* gap */
+ label = "gap";
+ reg = <0x000c0000 0x00040000>; /* 256KB */
+ };
- partition@7d0000 { /* MAC address and serial number */
- label = "vendor";
- reg = <0x007d0000 0x00010000>; /* 64KB */
- };
+ partition@100000 { /* u-boot-env */
+ label = "u-boot-env";
+ reg = <0x00100000 0x00010000>; /* 64KB */
+ };
- partition@7e0000 {
- label = "RedBoot config";
- reg = <0x007e0000 0x00010000>; /* 64KB */
- };
+ mtd_kernel: partition@110000 {
+ label = "kernel";
+ reg = <0x00110000 0x006c0000>; /* 6912KB */
+ };
- partition@7f0000 {
- label = "FIS directory";
- reg = <0x007f0000 0x00010000>; /* 64KB */
+ partition@7d0000 { /* MAC address and serial number */
+ reg = <0x007d0000 0x00010000>; /* 64KB */
+ label = "vendor";
+ read-only;
+
+ compatible = "nvmem-cells";
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_vendor_0: macaddr@0 {
+ reg = <0x0 0x6>;
+ };
+ };
+ };
+
+ mtd_gap2: partition@7e0000 {
+ label = "gap2";
+ reg = <0x007e0000 0x00020000>; /* 128KB */
+ };
};
};
};