ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-25 00:11:13 +00:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity
aba421432f
openwrt/target/linux/lantiq/base-files/etc/board.d/01_leds

82 lines
2.1 KiB
Plaintext
Raw Normal View History

lantiq: add uci-defaults code for handling leds SVN-Revision: 29004
2011-11-12 23:40:21 +00:00
#!/bin/sh
#
lantiq: switch from uci-defaults to board.d Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47755
2015-12-04 12:32:44 +00:00
# Copyright (C) 2011-2015 OpenWrt.org
lantiq: add uci-defaults code for handling leds SVN-Revision: 29004
2011-11-12 23:40:21 +00:00
# based on ar71xx
#
base-files: unify get_dt_led helper function Lantiq and IPQ806X (which includes IPQ40XX) both define the same custom function {ipq806x|lantiq}_get_dt_led. This patch moves the function into the base-file package at lib/functions/leds.sh to make it more accessible for other targets as well. Cc: Mathias Kresin <dev@kresin.me> Cc: John Crispin <john@phrozen.org> Cc: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2017-11-28 21:51:06 +00:00
. /lib/functions/leds.sh
all: drop old uci-defaults.sh Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one and update all users accordingly. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47867
2015-12-11 15:26:06 +00:00
. /lib/functions/uci-defaults.sh
lantiq: add uci-defaults code for handling leds SVN-Revision: 29004
2011-11-12 23:40:21 +00:00
lantiq: switch from uci-defaults to board.d Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47755
2015-12-04 12:32:44 +00:00
board_config_update
base-files: unify get_dt_led helper function Lantiq and IPQ806X (which includes IPQ40XX) both define the same custom function {ipq806x|lantiq}_get_dt_led. This patch moves the function into the base-file package at lib/functions/leds.sh to make it more accessible for other targets as well. Cc: Mathias Kresin <dev@kresin.me> Cc: John Crispin <john@phrozen.org> Cc: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2017-11-28 21:51:06 +00:00
led_wifi="$(get_dt_led wifi)"
lantiq: cleanup led handling functions Use a more generic name for the lantiq_get_dt_led_chosen function. Drop the lantiq_is_dt_led_chosen function. The lantiq_get_dt_led function can be used to achieve the same. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-04 18:30:34 +00:00
[ -n "$led_wifi" ] && ucidef_set_led_wlan "wifi" "wifi" "$led_wifi" "phy0tpt"
lantiq: use dsl led defined in DTS dsl_control (dsl_notify.sh) is the only process which is aware of the state of the atm/ptm interface. Use the dsl led exclusive for the dsl line state. On boards which don't have a distinct internet and a dsl led, let the netdev status of the atm interface trigger the shared led. Triggering the shared led according to the status of the ppp interface isn't suitable, since the led would be switched of if the ppp connection goes down, but the line is still in sync. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 48040
2016-01-01 21:18:38 +00:00
base-files: unify get_dt_led helper function Lantiq and IPQ806X (which includes IPQ40XX) both define the same custom function {ipq806x|lantiq}_get_dt_led. This patch moves the function into the base-file package at lib/functions/leds.sh to make it more accessible for other targets as well. Cc: Mathias Kresin <dev@kresin.me> Cc: John Crispin <john@phrozen.org> Cc: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2017-11-28 21:51:06 +00:00
led_usb="$(get_dt_led usb)"
lantiq: cleanup led handling functions Use a more generic name for the lantiq_get_dt_led_chosen function. Drop the lantiq_is_dt_led_chosen function. The lantiq_get_dt_led function can be used to achieve the same. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-04 18:30:34 +00:00
[ -n "$led_usb" ] && ucidef_set_led_usbdev "usb" "usb" "$led_usb" "1-1"
base-files: unify get_dt_led helper function Lantiq and IPQ806X (which includes IPQ40XX) both define the same custom function {ipq806x|lantiq}_get_dt_led. This patch moves the function into the base-file package at lib/functions/leds.sh to make it more accessible for other targets as well. Cc: Mathias Kresin <dev@kresin.me> Cc: John Crispin <john@phrozen.org> Cc: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2017-11-28 21:51:06 +00:00
led_usb2="$(get_dt_led usb2)"
lantiq: cleanup led handling functions Use a more generic name for the lantiq_get_dt_led_chosen function. Drop the lantiq_is_dt_led_chosen function. The lantiq_get_dt_led function can be used to achieve the same. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-04 18:30:34 +00:00
[ -n "$led_usb2" ] && ucidef_set_led_usbdev "usb2" "usb2" "$led_usb2" "2-1"
base-files: unify get_dt_led helper function Lantiq and IPQ806X (which includes IPQ40XX) both define the same custom function {ipq806x|lantiq}_get_dt_led. This patch moves the function into the base-file package at lib/functions/leds.sh to make it more accessible for other targets as well. Cc: Mathias Kresin <dev@kresin.me> Cc: John Crispin <john@phrozen.org> Cc: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2017-11-28 21:51:06 +00:00
led_dsl="$(get_dt_led dsl)"
lantiq: show xdsl line init status on shared dsl/internet led On boards which don't have a distinct internet and dsl led, use the shared LED to indicate the xdsl line state and any traffic that is send/received via the netdev. This traffic doesn't necessarily need to be internet traffic. Rename the shared LED of existing configs to "dsl", to match the new defaults. The configuration of the to be renamed LED is identical with the new defaults. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-06-14 18:17:16 +00:00
[ -n "$led_dsl" ] && {
base-files: unify get_dt_led helper function Lantiq and IPQ806X (which includes IPQ40XX) both define the same custom function {ipq806x|lantiq}_get_dt_led. This patch moves the function into the base-file package at lib/functions/leds.sh to make it more accessible for other targets as well. Cc: Mathias Kresin <dev@kresin.me> Cc: John Crispin <john@phrozen.org> Cc: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2017-11-28 21:51:06 +00:00
led_internet="$(get_dt_led internet)"
lantiq: show xdsl line init status on shared dsl/internet led On boards which don't have a distinct internet and dsl led, use the shared LED to indicate the xdsl line state and any traffic that is send/received via the netdev. This traffic doesn't necessarily need to be internet traffic. Rename the shared LED of existing configs to "dsl", to match the new defaults. The configuration of the to be renamed LED is identical with the new defaults. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-06-14 18:17:16 +00:00
if [ -n "$led_internet" ]; then
lantiq: cleanup led handling functions Use a more generic name for the lantiq_get_dt_led_chosen function. Drop the lantiq_is_dt_led_chosen function. The lantiq_get_dt_led function can be used to achieve the same. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-04 18:30:34 +00:00
ucidef_set_led_default "dsl" "dsl" "$led_dsl" "0"
lantiq: show xdsl line init status on shared dsl/internet led On boards which don't have a distinct internet and dsl led, use the shared LED to indicate the xdsl line state and any traffic that is send/received via the netdev. This traffic doesn't necessarily need to be internet traffic. Rename the shared LED of existing configs to "dsl", to match the new defaults. The configuration of the to be renamed LED is identical with the new defaults. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-06-14 18:17:16 +00:00
ucidef_set_led_netdev "internet" "internet" "$led_internet" "pppoe-wan"
else
lantiq: xway: rename nas0/ptm0 to dsl0 This change makes it possible to configure the wan/dsl ppp interface settings independantly from the used TC-Layer (ATM/PTM). By using dsl0 as interface name as for the xrx200 we can get rid of a few conditionals which were introduced because of the different default TC-Layer in xway and xrx200. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-10-14 18:52:22 +00:00
ucidef_set_led_netdev "dsl" "dsl" "$led_dsl" "dsl0"
lantiq: show xdsl line init status on shared dsl/internet led On boards which don't have a distinct internet and dsl led, use the shared LED to indicate the xdsl line state and any traffic that is send/received via the netdev. This traffic doesn't necessarily need to be internet traffic. Rename the shared LED of existing configs to "dsl", to match the new defaults. The configuration of the to be renamed LED is identical with the new defaults. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-06-14 18:17:16 +00:00
fi
lantiq: use dsl led defined in DTS dsl_control (dsl_notify.sh) is the only process which is aware of the state of the atm/ptm interface. Use the dsl led exclusive for the dsl line state. On boards which don't have a distinct internet and a dsl led, let the netdev status of the atm interface trigger the shared led. Triggering the shared led according to the status of the ppp interface isn't suitable, since the led would be switched of if the ppp connection goes down, but the line is still in sync. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 48040
2016-01-01 21:18:38 +00:00
}
lantiq: add uci-defaults code for handling leds SVN-Revision: 29004
2011-11-12 23:40:21 +00:00
lantiq: remove lantiq_board_name, use the generic function instead Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-03-17 15:21:30 +00:00
board=$(board_name)
update /etc/uci-defaults/* SVN-Revision: 31062
2012-03-25 08:50:30 +00:00
cleanup basefiles SVN-Revision: 34698
2012-12-15 02:01:00 +00:00
case "$board" in
lantiq: add Allnet ALL0333CJ support This patch adds support for the Allnet ADSL2+ Modem ALL0333CJ. Specifications: - SoC: Amazon-SE - RAM: 16MB - Storage: 4MB NOR FLash - LEDs: Power, Ethernet, DSL (Sync) - Buttons: 1x Reset Button (not currently supported, will be done) - 1x Ethernet-Port: 1x RJ45 10/100BaseTX - 1x WAN-Port: AnnexB & J, G.992.1(ADSL), G.992.3(ADSL2), G.992.5(ADSL2+) Installation: - can be done via telnet+tftp or serial console - default passwords: - via telnet (root:admin) - via webinterface http://172.16.1.254:8235/ (admin:coolwhite) Installation via telnet / tftp: host: # your own host must have an tftpd daemon, then do this: host: ifconfig eth0:172 172.16.1.1 up host: # telnet to allnet modem, root:admin host: telnet 172.16.1.254 modem: # kill this daemon, it spams your console modem: killall dsl_cpe_control modem: # change to some place in ram: modem: cd /ramdisk/tftp_upload modem: # load lede-lantiq-ase-ALL0333CJ-squashfs-sysupgrade.bin alias uImage modem: tftp -g -r uImage 172.16.1.1 modem: # load these extra tools from your tftpd via: modem: # source: https://github.com/mcmilk/uboot-utils/releases/download/0.1/mips32.tar.gz modem: tftp -g -r flashwrite 172.16.1.1 modem: tftp -g -r fw_setenv 172.16.1.1 modem: tftp -g -r fw.conf 172.16.1.1 modem: ln -s fw_setenv fw_printenv modem: chmod +x * modem: ./fw_setenv disable_recovery y modem: ./fw_setenv kernel_addr 0xb0010000 modem: ./flashwrite /dev/mtd/1 uImage 0 Installation via serial line at uboot: uboot: # erase everything exept bootloader uboot: protect on b0000000 +10000; protect on b03f0000 +10000 uboot: erase all uboot: # get new firmware via tftp: uboot: tftpboot 0x80100000 uImage; setenv kernel_addr 0xb0010000 uboot: # copy to flash: uboot: cp.b 0x80100000 $(kernel_addr) $(filesize) uboot: # disable proprietary image checking: uboot: setenv disable_recovery=y; saveenv uboot: # reboot with LEDE ;) uboot: reset Ethernet works as expected, DSL syncronization does not work properly currently, I am working on this issue. Signed-off-by: Tino Reichardt <milky-lede@mcmilk.de>
2017-02-26 20:29:37 +00:00
ALL0333CJ)
ucidef_set_led_netdev "lan" "lan" "all0333cj:green:lan" "eth0.1"
;;
lantiq: board.d: apply alphabetical order to led file Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-05 08:05:51 +00:00
ARV4525PW)
ucidef_set_led_netdev "wifi" "wifi" "arv4525pw:green:wlan" "wlan0"
;;
lantiq: add support for ARV7506PW11 (Alice/O2 IAD 4421) Ethernet, ADSL2+ and LEDs are fully functional. Supporting the two TAE ports and SIP gateway was not attempted. The WiFi is unreliable, due to experimental support for rt35xx family devices by the rt2800pci driver. Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> [rebase to LEDE HEAD] [switch to normal image instead of brnboot image] [remove not required pinmux child nodes keys, leds, ebu, exin, pci_in and pci_out] [remove switch_rst pinmux child node (no support for hw reset in driver/setting a default GPIO value in DT] [enable usage of the wireless LED] [fixup mac address configuration] Sgned-off-by: Mathias Kresin <dev@kresin.me>
2016-06-20 16:47:38 +00:00
ARV7506PW11)
ucidef_set_led_wlan "wifi" "wifi" "arv7506pw11:green:wlan" "phy0radio"
;;
lantiq: board.d: apply alphabetical order to led file Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-05 08:05:51 +00:00
ARV7519RW22)
ucidef_set_led_netdev "lan" "lan" "arv7519rw22:green:lan" "eth0.1"
;;
lantiq: ARV752DPW22: set correct wireless led trigger The ARV752DPW22 has a ralink based wireless and can not use the ath9k only phy0tpt trigger. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-10-16 20:36:35 +00:00
ARV752DPW22)
ucidef_set_led_wlan "wifi" "wifi" "arv752dpw22:red:wifi" "phy0radio"
;;
lantiq: fix led setup after switch to uci-defaults-new.sh The switch to uci-defaults-new.sh revealed a bug in the former used uci-defaults.sh, which failed to add leds with colons in the led name. This bug isn't any longer present in uci-defaults-new.sh and therefore all via DT defined leds will be added to /etc/config/system with their initial on/off state, regardless whether they are already added by the board specific led mappings. This results for a BTHOMEHUBV5A into the following led configuration: - soc:blue:power is added as led_power with the initial state "switched on" - soc:blue:power is added as led_soc_blue_power with the initial state "switched off" With the final result of a switched off power led after boot. The only led that needs to be added is the BTHOMEHUBV5A specific dimmed led. Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 47850
2015-12-11 15:05:30 +00:00
BTHOMEHUBV5A)
ucidef_set_led_default "dimmed" "dimmed" "dimmed" "0"
;;
lantiq: add Netgear DM200 support Netgear DM200 is an inexpensive VDSL modem: CPU: VRX220 MIPS 34Kc 5.6 @ 500Mhz RAM: 64MiB Flash: 8MiB Ethernet: 1x100M DSL: VDSL2+, ADSL2+ reset button, 3x bi-color LEDs Serial port is 115200 baud, on the 4 pin header; pins from the bottom to top are GND, RX, TX. To upgrade from the vendor firmware, upload factory.img The DM200 bootloader supports flashing over TFTP; hold the reset button while powering on the device, and wait for the power light to start flashing green before releasing. The device is now listening on 192.168.0.1/24, and can be sent a factory.img or a netgear image with a TFTP put. Once the image is loaded, it will be written to the flash, and the device will reboot; this will take a few minutes. Thanks to Edward O'Callaghan and Baptiste Jonglez, who implemented their own ports for this device and provided valuable feedback. Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
2017-04-23 21:07:17 +00:00
DM200)
ucidef_set_led_netdev "lan" "lan" "dm200:green:lan" "eth0"
;;
lantiq: board.d: apply alphabetical order to led file Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-05 08:05:51 +00:00
FRITZ7320)
ucidef_set_led_netdev "wifi" "wifi" "fritz7320:green:wlan" "wlan0"
lantiq: vgv7519 - set some defaults for leds Signed-off-by: Eddi De Pieri <eddi@depieri.net> SVN-Revision: 43256
2014-11-14 16:53:53 +00:00
;;
Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK Signed-off-by: Sylwester Petela <sscapi@gmail.com> SVN-Revision: 43987
2015-01-17 07:07:15 +00:00
P2812HNUF*)
lantiq: use devicename:colour:function led naming scheme The leds of the following boards are not renamed due to lack of manuals/informations: - ARV7519PW - ARV7510PW22 - ARV4510PW The leds of the ARV4518PWR01* boards are unchanged, since the leds doesn't match the leds from the manual or pictures (e.g. there shouldn't be a wps led). Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 48042
2016-01-01 21:18:54 +00:00
ucidef_set_led_wlan "wifi" "wifi" "p2812hnufx:green:wlan" "phy0radio"
Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK Signed-off-by: Sylwester Petela <sscapi@gmail.com> SVN-Revision: 43987
2015-01-17 07:07:15 +00:00
;;
lantiq: fix image validation errors The boards did not have the name set that is expected during metadata validation on sysupgrade. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-12-01 06:29:49 +00:00
VGV7510KW22*)
lantiq: board.d: apply alphabetical order to led file Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-05 08:05:51 +00:00
ucidef_set_led_wlan "wifi" "wifi" "vgv7510kw22:green:wlan" "phy0radio"
lantiq: fix fritz7320 wifi support Signed-off-by: John Crispin <john@phrozen.org>
2016-06-13 19:50:13 +00:00
;;
lantiq: fix image validation errors The boards did not have the name set that is expected during metadata validation on sysupgrade. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-12-01 06:29:49 +00:00
VGV7519*)
lantiq: board.d: apply alphabetical order to led file Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-05 08:05:51 +00:00
ucidef_set_led_wlan "wifi" "wifi" "vgv7519:green:wireless" "phy0radio"
lantiq: add ARV4525PW wifi led Signed-off-by: John Crispin <john@phrozen.org>
2016-06-14 03:11:54 +00:00
;;
lantiq: add Buffalo WBMR-300HPD support Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-09 14:51:39 +00:00
WBMR300)
ucidef_set_led_switch "lan1" "LAN1" "wbmr300:green:lan1" "switch0" "0x08"
ucidef_set_led_switch "lan2" "LAN2" "wbmr300:green:lan2" "switch0" "0x04"
ucidef_set_led_switch "wan" "WAN" "wbmr300:green:wan" "switch0" "0x10"
ucidef_set_led_switch "lan3" "LAN3" "wbmr300:green:lan3" "switch0" "0x20"
ucidef_set_led_default "router" "router" "wbmr300:green:router" "1"
;;
cleanup basefiles SVN-Revision: 34698
2012-12-15 02:01:00 +00:00
*)
lantiq: add uci-defaults code for handling leds SVN-Revision: 29004
2011-11-12 23:40:21 +00:00
;;
esac
lantiq: switch from uci-defaults to board.d Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47755
2015-12-04 12:32:44 +00:00
board_config_flush
lantiq: add uci-defaults code for handling leds SVN-Revision: 29004
2011-11-12 23:40:21 +00:00
exit 0
Reference in New Issue Copy Permalink