ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-22 23:12:32 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
aa256ab580
openwrt/target/linux/bmips/image/bcm6328.mk

72 lines
1.7 KiB
Makefile
Raw Normal View History

bmips: add subtargets for each SoC BMIPS is a generic arch that can be used for multiple Broadcom SoCs, each one with its own specific drivers, so instead of having a huge kernel supporting all of them, let's switch to a subtarget per SoC like other OpenWrt targets. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-04-09 19:01:11 +00:00
# SPDX-License-Identifier: GPL-2.0-or-later
bmips: add support for Arcadyan AR7516 The Arcadyan AR7516, AKA Orange Bright Box or EE Bright Box 1, is a wifi fast ethernet router, 2.4 GHz single band with two internal antennas. It comes with a horizontal stand black shiny casing. Newer Bright Box 1 model stands vertically, and comes with a totally different board inside, not compatible with this firmware. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 V7.5 @ 320Mhz - RAM: 64 MB DDR2 - Flash: 8 MB SPI NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: Broadcom BCM43227 802.11bgn (onboard) - USB: 1x 2.0 - ADSL: yes, unsupported - Buttons: 2x - LEDs: 9x, power LED is hardware controlled - UART: yes Installation in two steps, new CFE bootloader and firmware: Install new CFE: 1. Power off the router and press the RESET button 2. Power on the router and wait some seconds 3. Release the RESET button 3. Browse to http://192.168.1.1, this web interface will offer both firmware (“Software”) upgrade and bootloader upgrade; be sure to use the bootloader section of the upload form. 4. Upload the new CFE (availabe at the wiki page) 5. Wait about a minute for flashing to finish and reboot into the new bootloader. Install OpenWrt via new CFE web UI: 1. After installing the new CFE, visit http://192.168.1.1 2. Upload the Openwrt cfe firmware 5. Wait a few minutes for it to finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> (cherry-picked from df8e4b6c2e6440bc9a31467de1739c69c328e391)
2023-06-21 21:14:02 +00:00
define Device/arcadyan_ar7516
$(Device/bcm63xx-cfe)
DEVICE_VENDOR := Arcadyan
DEVICE_MODEL := AR7516
CHIP_ID := 6328
CFE_BOARD_ID := AR7516AAW
FLASH_MB := 8
DEVICE_PACKAGES += $(USB2_PACKAGES) \
$(B43_PACKAGES) broadcom-43227-sprom \
kmod-leds-bcm6328
endef
TARGET_DEVICES += arcadyan_ar7516
bmips: add support for Comtrend AR-5381u The Comtrend AR-5381u is a wifi fast ethernet router, 2.4 GHz single band with two internal antennas. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 @ 320Mhz - RAM: 64 MB DDR - Flash: 16 MB SPI NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: miniPCI Broadcom BCM43225 802.11bgn - USB: 1x 2.0 - Buttons: 1x (reset) - LEDs: yes - UART: yes Installation via CFE web UI: 1. Power off the router. 2. Press reset button near the power switch. 3. Keep it pressed while powering up during ~20+ seconds. 4. Browse to http://192.168.1.1 and upload the firmware. 5. Wait a few minutes for it to finish. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit bcdf861519)
2023-06-11 16:44:36 +00:00
define Device/comtrend_ar-5381u
$(Device/bcm63xx-cfe)
DEVICE_VENDOR := Comtrend
DEVICE_MODEL := AR-5381u
CHIP_ID := 6328
CFE_BOARD_ID := 96328A-1241N
FLASH_MB := 16
DEVICE_PACKAGES += $(USB2_PACKAGES) \
$(B43_PACKAGES) broadcom-43225-sprom \
kmod-leds-bcm6328
endef
TARGET_DEVICES += comtrend_ar-5381u
bmips: add subtargets for each SoC BMIPS is a generic arch that can be used for multiple Broadcom SoCs, each one with its own specific drivers, so instead of having a huge kernel supporting all of them, let's switch to a subtarget per SoC like other OpenWrt targets. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-04-09 19:01:11 +00:00
define Device/comtrend_ar-5387un
$(Device/bcm63xx-cfe)
DEVICE_VENDOR := Comtrend
DEVICE_MODEL := AR-5387un
CHIP_ID := 6328
CFE_BOARD_ID := 96328A-1441N1
FLASH_MB := 16
bmips: switch to generic bcma/ssb fallback SPROM Stop using bmips b43-sprom fixups and switch to generic bcma/ssb fallback SPROMs. This way we don't need to include the b43-sprom fixups on devices without Broadcom wireless. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-04-20 08:05:52 +00:00
DEVICE_PACKAGES += $(USB2_PACKAGES) \
$(B43_PACKAGES) broadcom-43225-sprom \
bmips: add subtargets for each SoC BMIPS is a generic arch that can be used for multiple Broadcom SoCs, each one with its own specific drivers, so instead of having a huge kernel supporting all of them, let's switch to a subtarget per SoC like other OpenWrt targets. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2023-04-09 19:01:11 +00:00
kmod-leds-bcm6328
endef
TARGET_DEVICES += comtrend_ar-5387un
bmips: add support for Sercomm AD1018 The Sercomm AD1018 is a wifi fast ethernet router, 2.4 GHz single band with two internal antennas. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 @ 320Mhz - RAM: 64 MB (v1) / 128 MB (v2) DDR - Flash: 128 MB NAND - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: miniPCI Broadcom BCM43217 802.11bgn - USB: 1x 2.0 - Buttons: 3x (reset) - LEDs: yes - UART: yes Installation via OEM web UI: 1. Use the admin credentials to login via web UI 2. Go to Managament->Update firmware and select the OpenWrt CFE firmware 3. Press "Update Firmware" button and wait some minutes until it finish Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 38ebb2eafde604ff6d9b0021d1d21208070a2d09)
2023-06-12 17:51:22 +00:00
bmips: add support for NuCom R5010UNv2 The NuCom R5010UNv2 is a wifi fast ethernet router, 2.4 GHz single band with two external antennas. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 V7.5 @ 320Mhz - RAM: 64 MB DDR2 - Flash: 16 MB SPI NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: Broadcom BCM43217 802.11bgn (onboard) - USB: 1x 2.0 - Buttons: 2x - ADSL: yes, unsupported - LEDs: 7x - UART: yes Installation via CFE web UI: 1. Power off the router and press the RESET button 2. Power on the router and wait 12 or more seconds 3. Release the RESET button 4. Browse to http://192.168.1.1 and upload the Openwrt cfe firmware 5. Wait a few minutes for it to finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> (cherry picked from commit 6cb3328b4fd4939f3800d4be9d52744b753de1b6)
2023-06-18 19:34:59 +00:00
define Device/nucom_r5010unv2
$(Device/bcm63xx-cfe)
DEVICE_VENDOR := NuCom
DEVICE_MODEL := R5010UNv2
CHIP_ID := 6328
CFE_BOARD_ID := 96328ang
FLASH_MB := 16
DEVICE_PACKAGES += $(USB2_PACKAGES) \
$(B43_PACKAGES) broadcom-43217-sprom \
kmod-leds-bcm6328
endef
TARGET_DEVICES += nucom_r5010unv2
bmips: add support for Sercomm AD1018 The Sercomm AD1018 is a wifi fast ethernet router, 2.4 GHz single band with two internal antennas. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 @ 320Mhz - RAM: 64 MB (v1) / 128 MB (v2) DDR - Flash: 128 MB NAND - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: miniPCI Broadcom BCM43217 802.11bgn - USB: 1x 2.0 - Buttons: 3x (reset) - LEDs: yes - UART: yes Installation via OEM web UI: 1. Use the admin credentials to login via web UI 2. Go to Managament->Update firmware and select the OpenWrt CFE firmware 3. Press "Update Firmware" button and wait some minutes until it finish Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 38ebb2eafde604ff6d9b0021d1d21208070a2d09)
2023-06-12 17:51:22 +00:00
define Device/sercomm_ad1018
$(Device/sercomm-nand)
DEVICE_VENDOR := Sercomm
DEVICE_MODEL := AD1018
CHIP_ID := 6328
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
VID_HDR_OFFSET := 2048
DEVICE_PACKAGES += $(USB2_PACKAGES) \
$(B43_PACKAGES) broadcom-43217-sprom \
kmod-leds-bcm6328
SERCOMM_FSVER := 1001
SERCOMM_HWVER := 1415153
SERCOMM_SWVER := 3013
endef
TARGET_DEVICES += sercomm_ad1018
Reference in New Issue Copy Permalink