ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-23 15:32:33 +00:00
Code Issues Actions 7 Packages Projects Releases Wiki Activity
a9363914a3
openwrt/target/linux/kirkwood/patches-4.14/106-goflexnet.patch

54 lines
1.1 KiB
Diff
Raw Normal View History

kirkwood: add kernel 4.14 support Add patches for 4.14, undoing upstream changes for Linksys devices regarding DSA. Instead, the switchdev driver marvell,88e6171 is used. Tested-by: Daniel Engberg <daniel.engberg.lists@pyret.net> Tested-by: Alberto Bursi <alberto.bursi@outlook.it> Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2018-03-12 19:50:48 +00:00
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
kirkwood: use generic diag.sh This commit removes the target-specific diag.sh script. This way, the generic one is used for the target, which uses DT-aliases to specify the LEDs used. Generic diag.sh allow to use different LEDs to indicate different states. Non-red status LEDs for indicating boot and a running system. Where possible, the red or orange LEDs are used to indicate failsafe mode and a running upgrade. Compile-tested: all target devices. Run-tested: CheckPoint L-50 Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [remove unrelated cosmetic changes, rename some labels, add pogo_e02] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-02-04 16:26:47 +00:00
@@ -8,6 +8,13 @@
model = "Seagate GoFlex Net";
compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+ aliases {
+ led-boot = &led_health;
+ led-failsafe = &led_fault;
+ led-running = &led_health;
+ led-upgrade = &led_fault;
+ };
+
memory {
device_type = "memory";
reg = <0x00000000 0x8000000>;
kirkwood: set default state for status LEDs in device tree This adds the default-state = "on"; statement for the power or primary status LED in DTS on kirkwood. This will ensure that this LED will be lit up very early in the boot process (i.e. before diag.sh is executed) and thus will provide an additional hint to the user when problems arise during early boot process. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-02-19 16:03:04 +00:00
@@ -85,12 +92,12 @@
kirkwood: use generic diag.sh This commit removes the target-specific diag.sh script. This way, the generic one is used for the target, which uses DT-aliases to specify the LEDs used. Generic diag.sh allow to use different LEDs to indicate different states. Non-red status LEDs for indicating boot and a running system. Where possible, the red or orange LEDs are used to indicate failsafe mode and a running upgrade. Compile-tested: all target devices. Run-tested: CheckPoint L-50 Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [remove unrelated cosmetic changes, rename some labels, add pogo_e02] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-02-04 16:26:47 +00:00
>;
pinctrl-names = "default";
- health {
+ led_health: health {
label = "status:green:health";
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- default-state = "keep";
kirkwood: set default state for status LEDs in device tree This adds the default-state = "on"; statement for the power or primary status LED in DTS on kirkwood. This will ensure that this LED will be lit up very early in the boot process (i.e. before diag.sh is executed) and thus will provide an additional hint to the user when problems arise during early boot process. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-02-19 16:03:04 +00:00
+ default-state = "on";
kirkwood: use generic diag.sh This commit removes the target-specific diag.sh script. This way, the generic one is used for the target, which uses DT-aliases to specify the LEDs used. Generic diag.sh allow to use different LEDs to indicate different states. Non-red status LEDs for indicating boot and a running system. Where possible, the red or orange LEDs are used to indicate failsafe mode and a running upgrade. Compile-tested: all target devices. Run-tested: CheckPoint L-50 Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [remove unrelated cosmetic changes, rename some labels, add pogo_e02] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-02-04 16:26:47 +00:00
};
- fault {
+ led_fault: fault {
label = "status:orange:fault";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
kirkwood: set default state for status LEDs in device tree This adds the default-state = "on"; statement for the power or primary status LED in DTS on kirkwood. This will ensure that this LED will be lit up very early in the boot process (i.e. before diag.sh is executed) and thus will provide an additional hint to the user when problems arise during early boot process. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-02-19 16:03:04 +00:00
@@ -159,18 +166,8 @@
kirkwood: add kernel 4.14 support Add patches for 4.14, undoing upstream changes for Linksys devices regarding DSA. Instead, the switchdev driver marvell,88e6171 is used. Tested-by: Daniel Engberg <daniel.engberg.lists@pyret.net> Tested-by: Alberto Bursi <alberto.bursi@outlook.it> Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2018-03-12 19:50:48 +00:00
};
partition@100000 {
- label = "uImage";
- reg = <0x0100000 0x400000>;
- };
-
- partition@500000 {
- label = "pogoplug";
- reg = <0x0500000 0x2000000>;
- };
-
- partition@2500000 {
- label = "root";
- reg = <0x02500000 0xd800000>;
+ label = "ubi";
+ reg = <0x0100000 0x0ff00000>;
};
};
Reference in New Issue Copy Permalink