openwrt/target/linux/bcm27xx/patches-4.19/950-0813-overlays-Add-sh1106-spi-and-ssd1351-spi-overlays-344.patch

From 1b8ea7066ee06404e0148702bc3e85a191f6d867 Mon Sep 17 00:00:00 2001
From: MikeDK <m.kaplan@evva.com>
Date: Fri, 31 Jan 2020 12:45:43 +0100
Subject: [PATCH] overlays: Add sh1106-spi and ssd1351-spi overlays
 (#3442)

Add overlays for SH1106 and SSD1351 based OLED displays.
SH1106 is present in many 1.3 inch OLEDs and SSD1351 is present in
1.5 inch RGB OLEDs from AliExpress.

This will load the staging fbtft drivers.

Signed-off-by: Michael Kaplan <m.kaplan@evva.com>
---
 arch/arm/boot/dts/overlays/Makefile           |  2 +
 arch/arm/boot/dts/overlays/README             | 23 ++++++
 .../boot/dts/overlays/sh1106-spi-overlay.dts  | 82 +++++++++++++++++++
 .../boot/dts/overlays/ssd1351-spi-overlay.dts | 81 ++++++++++++++++++
 4 files changed, 188 insertions(+)
 create mode 100644 arch/arm/boot/dts/overlays/sh1106-spi-overlay.dts
 create mode 100644 arch/arm/boot/dts/overlays/ssd1351-spi-overlay.dts

--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -145,6 +145,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	sdhost.dtbo \
 	sdio.dtbo \
 	sdtweak.dtbo \
+	sh1106-spi.dtbo \
 	smi.dtbo \
 	smi-dev.dtbo \
 	smi-nand.dtbo \
@@ -169,6 +170,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	spi6-2cs.dtbo \
 	ssd1306.dtbo \
 	ssd1306-spi.dtbo \
+	ssd1351-spi.dtbo \
 	superaudioboard.dtbo \
 	sx150x.dtbo \
 	tc358743.dtbo \
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -2145,6 +2145,18 @@ Params: overclock_50            Clock (i
                                 (default on)
 
 
+Name:   sh1106-spi
+Info:   Overlay for SH1106 OLED via SPI using fbtft staging driver.
+Load:   dtoverlay=sh1106-spi,<param>=<val>
+Params: speed                   SPI bus speed (default 4000000)
+        rotate                  Display rotation (0, 90, 180 or 270; default 0)
+        fps                     Delay between frame updates (default 25)
+        debug                   Debug output level (0-7; default 0)
+        dc_pin                  GPIO pin for D/C (default 24)
+        reset_pin               GPIO pin for RESET (default 25)
+        height                  Display height (32 or 64; default 64)
+
+
 Name:   smi
 Info:   Enables the Secondary Memory Interface peripheral. Uses GPIOs 2-25!
 Load:   dtoverlay=smi
@@ -2440,6 +2452,17 @@ Params: speed                   SPI bus
         height                  Display height (32 or 64; default 64)
 
 
+Name:   ssd1351-spi
+Info:   Overlay for SSD1351 OLED via SPI using fbtft staging driver.
+Load:   dtoverlay=ssd1351-spi,<param>=<val>
+Params: speed                   SPI bus speed (default 4500000)
+        rotate                  Display rotation (0, 90, 180 or 270; default 0)
+        fps                     Delay between frame updates (default 25)
+        debug                   Debug output level (0-7; default 0)
+        dc_pin                  GPIO pin for D/C (default 24)
+        reset_pin               GPIO pin for RESET (default 25)
+
+
 Name:   superaudioboard
 Info:   Configures the SuperAudioBoard sound card
 Load:   dtoverlay=superaudioboard,<param>=<val>
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/sh1106-spi-overlay.dts
@@ -0,0 +1,82 @@
+/*
+ * Device Tree overlay for SH1106 based SPI OLED display
+ *
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "brcm,bcm2835";
+
+	fragment@0 {
+		target = <&spi0>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	fragment@1 {
+		target = <&spidev0>;
+		__overlay__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@2 {
+		target = <&spidev1>;
+		__overlay__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@3 {
+		target = <&gpio>;
+		__overlay__ {
+			sh1106_pins: sh1106_pins {
+                                brcm,pins = <25 24>;
+                                brcm,function = <1 1>; /* out out */
+			};
+		};
+	};
+
+	fragment@4 {
+		target = <&spi0>;
+		__overlay__ {
+			/* needed to avoid dtc warning */
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sh1106: sh1106@0{
+				compatible = "sinowealth,sh1106";
+				reg = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&sh1106_pins>;
+
+				spi-max-frequency = <4000000>;
+				bgr = <0>;
+				bpp = <1>;
+				rotate = <0>;
+				fps = <25>;
+				buswidth = <8>;
+				reset-gpios = <&gpio 25 0>;
+				dc-gpios = <&gpio 24 0>;
+				debug = <0>;
+
+				sinowealth,height = <64>;
+				sinowealth,width = <128>;
+				sinowealth,page-offset = <0>;
+			};
+		};
+	};
+
+	__overrides__ {
+		speed		= <&sh1106>,"spi-max-frequency:0";
+		rotate		= <&sh1106>,"rotate:0";
+		fps		= <&sh1106>,"fps:0";
+		debug		= <&sh1106>,"debug:0";
+		dc_pin		= <&sh1106>,"dc-gpios:4>";
+		reset_pin	= <&sh1106>,"reset-gpios:4>";
+		height		= <&sh1106>,"sinowealth,height:0>";
+	};
+};
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/ssd1351-spi-overlay.dts
@@ -0,0 +1,81 @@
+/*
+ * Device Tree overlay for SSD1351 based SPI OLED display
+ *
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "brcm,bcm2835";
+
+	fragment@0 {
+		target = <&spi0>;
+		__overlay__ {
+			status = "okay";
+		};
+	};
+
+	fragment@1 {
+		target = <&spidev0>;
+		__overlay__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@2 {
+		target = <&spidev1>;
+		__overlay__ {
+			status = "disabled";
+		};
+	};
+
+	fragment@3 {
+		target = <&gpio>;
+		__overlay__ {
+			ssd1351_pins: ssd1351_pins {
+                                brcm,pins = <25 24>;
+                                brcm,function = <1 1>; /* out out */
+			};
+		};
+	};
+
+	fragment@4 {
+		target = <&spi0>;
+		__overlay__ {
+			/* needed to avoid dtc warning */
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ssd1351: ssd1351@0{
+				compatible = "solomon,ssd1351";
+				reg = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&ssd1351_pins>;
+
+				spi-max-frequency = <4500000>;
+				bgr = <0>;
+				bpp = <16>;
+				rotate = <0>;
+				fps = <25>;
+				buswidth = <8>;
+				reset-gpios = <&gpio 25 0>;
+				dc-gpios = <&gpio 24 0>;
+				debug = <0>;
+
+				solomon,height = <128>;
+				solomon,width = <128>;
+				solomon,page-offset = <0>;
+			};
+		};
+	};
+
+	__overrides__ {
+		speed		= <&ssd1351>,"spi-max-frequency:0";
+		rotate		= <&ssd1351>,"rotate:0";
+		fps		= <&ssd1351>,"fps:0";
+		debug		= <&ssd1351>,"debug:0";
+		dc_pin		= <&ssd1351>,"dc-gpios:4>";
+		reset_pin	= <&ssd1351>,"reset-gpios:4>";
+	};
+};