openwrt/target/linux/bcm27xx/patches-5.15/950-0763-drm-panel-Add-prepare_upstream_first-flag-to-drm_pan.patch

From b5a2faf6deb6e7accec2c121840a72bdf6e97b4c Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Wed, 23 Feb 2022 15:36:56 +0000
Subject: [PATCH] drm/panel: Add prepare_upstream_first flag to
 drm_panel

Mapping to the drm_bridge flag pre_enable_upstream_first,
add a new flag prepare_upstream_first to drm_panel to allow
the panel driver to request that the upstream bridge should
be pre_enabled before the panel prepare.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 drivers/gpu/drm/bridge/panel.c |  3 +++
 include/drm/drm_panel.h        | 10 ++++++++++
 2 files changed, 13 insertions(+)

--- a/drivers/gpu/drm/bridge/panel.c
+++ b/drivers/gpu/drm/bridge/panel.c
@@ -225,6 +225,9 @@ struct drm_bridge *drm_panel_bridge_add_
 	panel_bridge->bridge.ops = DRM_BRIDGE_OP_MODES;
 	panel_bridge->bridge.type = connector_type;
 
+	panel_bridge->bridge.pre_enable_upstream_first =
+						panel->prepare_upstream_first;
+
 	drm_bridge_add(&panel_bridge->bridge);
 
 	return &panel_bridge->bridge;
--- a/include/drm/drm_panel.h
+++ b/include/drm/drm_panel.h
@@ -179,6 +179,16 @@ struct drm_panel {
 	 * Panel entry in registry.
 	 */
 	struct list_head list;
+
+	/**
+	 * @prepare_upstream_first:
+	 *
+	 * The upstream controller should be prepared first, before the prepare
+	 * for the panel is called. This is largely required for DSI panels
+	 * where the DSI host controller should be initialised to LP-11 before
+	 * the panel is powered up.
+	 */
+	bool prepare_upstream_first;
 };
 
 void drm_panel_init(struct drm_panel *panel, struct device *dev,