openwrt/target/linux/generic/backport-5.15/795-v6.6-08-r8152-adjust-generic_ocp_write-function.patch

71 lines
2.0 KiB
Diff
Raw Normal View History

kernel: backport fixes for realtek r8152 Fixes issues with RTL8156 2.5G USB adapters - # ethtool eth1 Settings for eth1: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 2500Mb/s Duplex: Half Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: off MDI-X: Unknown Current message level: 0x00000007 (7) drv probe link Link detected: yes - # - r8152: break the loop when the budget is exhausted - r8152: Block future register access if register access fails - r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE - r8152: add vendor/device ID pair for D-Link DUB-E250 - r8152: try to use a normal budget - r8152: set bp in bulk - r8152: adjust generic_ocp_write function - r8152: fix the autosuspend doesn't work - r8152: Add __GFP_NOWARN to big allocations - r8152: reduce the control transfer of rtl8152_get_version() - r8152: remove rtl_vendor_mode function - r8152: avoid to change cfg for all devices - r8152: add USB device driver for config selection - r8152: use napi_gro_frags - cdc_ether: no need to blacklist any r8152 devices - cdc_ether: add u-blox 0x1313 composition Build system: x86_64 Build-tested: bcm2711, rockchip, x86/64 Run-tested: bcm2711/RPi4B, rockchip/nanopi r2s, x86/64 Signed-off-by: Marty Jones <mj8263788@gmail.com>
2023-11-28 18:27:18 +00:00
From 57df0fb9d511f91202114813e90128d65c0589f0 Mon Sep 17 00:00:00 2001
From: Hayes Wang <hayeswang@realtek.com>
Date: Wed, 26 Jul 2023 11:08:07 +0800
Subject: [PATCH] r8152: adjust generic_ocp_write function
Reduce the control transfer if all bytes of first or the last DWORD are
written.
The original method is to split the control transfer into three parts
(the first DWORD, middle continuous data, and the last DWORD). However,
they could be combined if whole bytes of the first DWORD or last DWORD
are written. That is, the first DWORD or the last DWORD could be combined
with the middle continuous data, if the byte_en is 0xff.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20230726030808.9093-418-nic_swsd@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
---
drivers/net/usb/r8152.c | 29 ++++++++++++++++++-----------
1 file changed, 18 insertions(+), 11 deletions(-)
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1310,16 +1310,24 @@ static int generic_ocp_write(struct r815
byteen_end = byteen & BYTE_EN_END_MASK;
byen = byteen_start | (byteen_start << 4);
- ret = set_registers(tp, index, type | byen, 4, data);
- if (ret < 0)
- goto error1;
-
- index += 4;
- data += 4;
- size -= 4;
- if (size) {
+ /* Split the first DWORD if the byte_en is not 0xff */
+ if (byen != BYTE_EN_DWORD) {
+ ret = set_registers(tp, index, type | byen, 4, data);
+ if (ret < 0)
+ goto error1;
+
+ index += 4;
+ data += 4;
size -= 4;
+ }
+
+ if (size) {
+ byen = byteen_end | (byteen_end >> 4);
+
+ /* Split the last DWORD if the byte_en is not 0xff */
+ if (byen != BYTE_EN_DWORD)
+ size -= 4;
while (size) {
if (size > limit) {
@@ -1346,10 +1354,9 @@ static int generic_ocp_write(struct r815
}
}
- byen = byteen_end | (byteen_end >> 4);
- ret = set_registers(tp, index, type | byen, 4, data);
- if (ret < 0)
- goto error1;
+ /* Set the last DWORD */
+ if (byen != BYTE_EN_DWORD)
+ ret = set_registers(tp, index, type | byen, 4, data);
}
error1: