openwrt/target/linux/ramips/dts/rt5350_zyxel_keenetic-4g-b.dts

146 lines
2.4 KiB
Plaintext
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
#include "rt5350.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "zyxel,keenetic-4g-b", "ralink,rt5350-soc";
model = "Zyxel Keenetic 4G Rev.B";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
leds {
compatible = "gpio-leds";
led_power: power {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
usb {
function = LED_FUNCTION_USB;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
};
reserved {
label = "green:reserved";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
internet {
label = "green:internet";
gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
};
wlan {
function = LED_FUNCTION_WLAN;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
wps {
label = "wps";
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <30000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x200>;
};
macaddr_factory_28: macaddr@28 {
reg = <0x28 0x6>;
};
};
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
};
&state_default {
gpio {
groups = "uartf";
function = "gpio";
};
};
&ethernet {
nvmem-cells = <&macaddr_factory_28>;
nvmem-cell-names = "mac-address";
};
&esw {
mediatek,portmap = <0x2f>;
mediatek,led_polarity = <0x17>;
};
&wmac {
ralink,led-polarity = <1>;
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
};