openwrt/target/linux/ramips/dts/mt7621_tplink_re500-v1.dts

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "mt7621_tplink_rexx0-v1.dtsi"

/ {
	compatible = "tplink,re500-v1", "mediatek,mt7621-soc";
	model = "TP-Link RE500 v1";
};
ramips: add support for TP-Link RE500 v1 This device uses the same hardware as RE650 v1 which got supported in 8c51dde. Hardware specification: - SoC 880 MHz - MediaTek MT7621AT - 128 MB of DDR3 RAM - 16 MB - Winbond 25Q128FVSG - 4T4R 2.4 GHz - MediaTek MT7615E - 4T4R 5 GHz - MediaTek MT7615E - 1x 1 Gbps Ethernet - MT7621AT integrated - 7x LEDs (Power, 2G, 5G, WPS(x2), Lan(x2)) - 4x buttons (Reset, Power, WPS, LED) - UART header (J1) - 2:GND, 3:RX, 4:TX Serial console @ 57600,8n1 Flash instructions: Upload openwrt-ramips-mt7621-tplink_re500-v1-squashfs-factory.bin from the RE500 web interface. TFTP recovery to stock firmware: Unfortunately, I can't find an easy way to recover the RE without opening the device and using modified binaries. The TFTP upload will only work if selected from u-boot, which means you have to open the device and attach to the serial console. The TFTP update procedure does not accept the published vendor firmware binaries. However, it allows to flash kernel + rootfs binaries, and this works if you have a backup of the original contents of the flash. It's probably possible to create special image out of the vendor binaries and use that as recovery image. Signed-off-by: Christoph Krapp <achterin@googlemail.com> [remove dts-v1 in DTSI, do not touch WiFi LEDs for RE650, keep state_default in DTS files, fix label-mac-device, use lower case for WiFi LEDs] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> 2020-07-06 21:05:25 +00:00			`// SPDX-License-Identifier: GPL-2.0-or-later OR MIT`

			`#include "mt7621_tplink_rexx0-v1.dtsi"`

			`/ {`
			`compatible = "tplink,re500-v1", "mediatek,mt7621-soc";`
			`model = "TP-Link RE500 v1";`
			`};`