2008-11-18 20:52:33 +00:00
|
|
|
#
|
openssl: update to 1.0.2g (8 CVEs)
CVE-2016-0704
s2_srvr.c overwrite the wrong bytes in the master-key when applying
Bleichenbacher protection for export cipher suites. This provides a
Bleichenbacher oracle, and could potentially allow more efficient variants of
the DROWN attack.
CVE-2016-0703
s2_srvr.c did not enforce that clear-key-length is 0 for non-export ciphers.
If clear-key bytes are present for these ciphers, they *displace* encrypted-key
bytes. This leads to an efficient divide-and-conquer key recovery attack: if
an eavesdropper has intercepted an SSLv2 handshake, they can use the server as
an oracle to determine the SSLv2 master-key, using only 16 connections to the
server and negligible computation. More importantly, this leads to a more
efficient version of DROWN that is effective against non-export ciphersuites,
and requires no significant computation.
CVE-2016-0702
A side-channel attack was found which makes use of cache-bank conflicts on
the Intel Sandy-Bridge microarchitecture which could lead to the recovery of
RSA keys. The ability to exploit this issue is limited as it relies on an
attacker who has control of code in a thread running on the same hyper-
threaded core as the victim thread which is performing decryptions.
CVE-2016-0799
The internal |fmtstr| function used in processing a "%s" format string in
the BIO_*printf functions could overflow while calculating the length of a
string and cause an OOB read when printing very long strings. Additionally
the internal |doapr_outch| function can attempt to write to an OOB memory
location (at an offset from the NULL pointer) in the event of a memory
allocation failure. In 1.0.2 and below this could be caused where the size
of a buffer to be allocated is greater than INT_MAX. E.g. this could be in
processing a very long "%s" format string. Memory leaks can also occur.
The first issue may mask the second issue dependent on compiler behaviour.
These problems could enable attacks where large amounts of untrusted data is
passed to the BIO_*printf functions. If applications use these functions in
this way then they could be vulnerable. OpenSSL itself uses these functions
when printing out human-readable dumps of ASN.1 data. Therefore applications
that print this data could be vulnerable if the data is from untrusted sources.
OpenSSL command line applications could also be vulnerable where they print out
ASN.1 data, or if untrusted data is passed as command line arguments. Libssl is
not considered directly vulnerable. Additionally certificates etc received via
remote connections via libssl are also unlikely to be able to trigger these
issues because of message size limits enforced within libssl.
CVE-2016-0797
In the BN_hex2bn function the number of hex digits is calculated using an int
value |i|. Later |bn_expand| is called with a value of |i * 4|. For large
values of |i| this can result in |bn_expand| not allocating any memory because
|i * 4| is negative. This can leave the internal BIGNUM data field as NULL
leading to a subsequent NULL ptr deref. For very large values of |i|, the
calculation |i * 4| could be a positive value smaller than |i|. In this case
memory is allocated to the internal BIGNUM data field, but it is insufficiently
sized leading to heap corruption. A similar issue exists in BN_dec2bn. This
could have security consequences if BN_hex2bn/BN_dec2bn is ever called by user
applications with very large untrusted hex/dec data. This is anticipated to be
a rare occurrence. All OpenSSL internal usage of these functions use data that
is not expected to be untrusted, e.g. config file data or application command
line arguments. If user developed applications generate config file data based
on untrusted data then it is possible that this could also lead to security
consequences. This is also anticipated to be rare.
CVE-2016-0798
The SRP user database lookup method SRP_VBASE_get_by_user had confusing memory
management semantics; the returned pointer was sometimes newly allocated, and
sometimes owned by the callee. The calling code has no way of distinguishing
these two cases. Specifically, SRP servers that configure a secret seed to hide
valid login information are vulnerable to a memory leak: an attacker connecting
with an invalid username can cause a memory leak of around 300 bytes per
connection. Servers that do not configure SRP, or configure SRP but do not
configure a seed are not vulnerable. In Apache, the seed directive is known as
SSLSRPUnknownUserSeed. To mitigate the memory leak, the seed handling in
SRP_VBASE_get_by_user is now disabled even if the user has configured a seed.
Applications are advised to migrate to SRP_VBASE_get1_by_user. However, note
that OpenSSL makes no strong guarantees about the indistinguishability of valid
and invalid logins. In particular, computations are currently not carried out
in constant time.
CVE-2016-0705
A double free bug was discovered when OpenSSL parses malformed DSA private keys
and could lead to a DoS attack or memory corruption for applications that
receive DSA private keys from untrusted sources. This scenario is considered
rare.
CVE-2016-0800
A cross-protocol attack was discovered that could lead to decryption of TLS
sessions by using a server supporting SSLv2 and EXPORT cipher suites as a
Bleichenbacher RSA padding oracle. Note that traffic between clients and non-
vulnerable servers can be decrypted provided another server supporting SSLv2
and EXPORT ciphers (even with a different protocol such as SMTP, IMAP or POP)
shares the RSA keys of the non-vulnerable server. This vulnerability is known
as DROWN (CVE-2016-0800). Recovering one session key requires the attacker to
perform approximately 2^50 computation, as well as thousands of connections to
the affected server. A more efficient variant of the DROWN attack exists
against unpatched OpenSSL servers using versions that predate 1.0.2a, 1.0.1m,
1.0.0r and 0.9.8zf released on 19/Mar/2015 (see CVE-2016-0703 below). Users can
avoid this issue by disabling the SSLv2 protocol in all their SSL/TLS servers,
if they've not done so already. Disabling all SSLv2 ciphers is also sufficient,
provided the patches for CVE-2015-3197 (fixed in OpenSSL 1.0.1r and 1.0.2f)
have been deployed. Servers that have not disabled the SSLv2 protocol, and are
not patched for CVE-2015-3197 are vulnerable to DROWN even if all SSLv2
ciphers are nominally disabled, because malicious clients can force the use of
SSLv2 with EXPORT ciphers. OpenSSL 1.0.2g and 1.0.1s deploy the following
mitigation against DROWN: SSLv2 is now by default disabled at build-time.
Builds that are not configured with "enable-ssl2" will not support SSLv2.
Even if "enable-ssl2" is used, users who want to negotiate SSLv2 via the
version-flexible SSLv23_method() will need to explicitly call either of:
SSL_CTX_clear_options(ctx, SSL_OP_NO_SSLv2); or SSL_clear_options(ssl,
SSL_OP_NO_SSLv2); as appropriate. Even if either of those is used, or the
application explicitly uses the version-specific SSLv2_method() or its client
or server variants, SSLv2 ciphers vulnerable to exhaustive search key recovery
have been removed. Specifically, the SSLv2 40-bit EXPORT ciphers, and SSLv2
56-bit DES are no longer available. In addition, weak ciphers in SSLv3 and up
are now disabled in default builds of OpenSSL. Builds that are not configured
with "enable-weak-ssl-ciphers" will not provide any "EXPORT" or "LOW" strength
ciphers.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48868
2016-03-01 14:31:08 +00:00
|
|
|
# Copyright (C) 2006-2016 OpenWrt.org
|
2006-06-27 00:35:46 +00:00
|
|
|
#
|
|
|
|
|
# This is free software, licensed under the GNU General Public License v2.
|
|
|
|
|
# See /LICENSE for more information.
|
|
|
|
|
#
|
2006-06-11 00:41:05 +00:00
|
|
|
|
|
|
|
|
include $(TOPDIR)/rules.mk
|
|
|
|
|
|
|
|
|
|
PKG_NAME:=openssl
|
2024-09-05 08:21:57 +00:00
|
|
|
PKG_VERSION:=3.0.15
|
|
|
|
|
PKG_RELEASE:=1
|
openssl: opt-out of lto usage
This fixes building with USE_LTO enabled:
aarch64-openwrt-linux-musl-gcc -fPIC -pthread -Wa,--noexecstack -Wall -O3 -Os -pipe -mcpu=cortex-a53 -fno-caller-saves -fno-plt -fhonour-copts -fmacro-prefix-map=/build_dir/target-aarch64_cortex-a53_musl/openssl-3.0.9=openssl-3.0.9 -ffunction-sections -fdata-sections -flto=auto -fno-fat-lto-objects -Wformat -Werror=format-security -DPIC -fPIC -fstack-protector-strong -D_FORTIFY_SOURCE=1 -Wl,-z,now -Wl,-z,relro -DPIC -fPIC -Os -pipe -mcpu=cortex-a53 -fno-caller-saves -fno-plt -fhonour-copts -fmacro-prefix-map=/build_dir/target-aarch64_cortex-a53_musl/openssl-3.0.9=openssl-3.0.9 -ffunction-sections -fdata-sections -flto=auto -fno-fat-lto-objects -Wformat -Werror=format-security -fPIC -fstack-protector-strong -fPIC -fuse-ld=bfd -flto=auto -fuse-linker-plugin -fPIC -specs=/include/hardened-ld-pie.specs -znow -zrelro -L. -Wl,-z,defs -Wl,-znodelete -shared -Wl,-Bsymbolic -Wl,-z,now -Wl,-z,relro -L/staging_dir/toolchain-aarch64_cortex-a53_gcc-13.1.0_musl/usr/lib -L/staging_dir/toolchain-aarch64_cortex-a53_gcc-13.1.0_musl/lib -Wl,--gc-sections \
-o providers/legacy.so -Wl,--version-script=providers/legacy.ld \
providers/legacy-dso-legacyprov.o \
providers/liblegacy.a providers/libcommon.a -lcrypto -ldl -pthread
ld.bfd: /tmp/ccdWw6Lo.ltrans0.ltrans.o: in function `legacy_get_params':
<artificial>:(.text.legacy_get_params+0xd4): undefined reference to `ossl_prov_is_running'
ld.bfd: <artificial>:(.text.legacy_get_params+0xd8): undefined reference to `ossl_prov_is_running'
ld.bfd: /tmp/ccdWw6Lo.ltrans0.ltrans.o: in function `legacy_teardown':
<artificial>:(.text.legacy_teardown+0x4): undefined reference to `ossl_prov_ctx_get0_libctx'
ld.bfd: <artificial>:(.text.legacy_teardown+0x8): undefined reference to `ossl_prov_ctx_get0_libctx'
ld.bfd: <artificial>:(.text.legacy_teardown+0x34): undefined reference to `ossl_prov_ctx_free'
ld.bfd: <artificial>:(.text.legacy_teardown+0x38): undefined reference to `ossl_prov_ctx_free'
ld.bfd: /tmp/ccdWw6Lo.ltrans0.ltrans.o: in function `OSSL_provider_init':
<artificial>:(.text.OSSL_provider_init+0x14): undefined reference to `ossl_prov_ctx_new'
ld.bfd: <artificial>:(.text.OSSL_provider_init+0x18): undefined reference to `ossl_prov_ctx_new'
ld.bfd: <artificial>:(.text.OSSL_provider_init+0x84): undefined reference to `ossl_prov_ctx_set0_libctx'
ld.bfd: <artificial>:(.text.OSSL_provider_init+0x88): undefined reference to `ossl_prov_ctx_set0_libctx'
ld.bfd: <artificial>:(.text.OSSL_provider_init+0x98): undefined reference to `ossl_prov_ctx_set0_handle'
ld.bfd: <artificial>:(.text.OSSL_provider_init+0x9c): undefined reference to `ossl_prov_ctx_set0_handle'
ld.bfd: /tmp/ccdWw6Lo.ltrans0.ltrans.o:(.data.rel.ro.legacy_kdfs+0x10): undefined reference to `ossl_kdf_pbkdf1_functions'
ld.bfd: /tmp/ccdWw6Lo.ltrans0.ltrans.o:(.data.rel.ro.legacy_ciphers+0x10): undefined reference to `ossl_cast5128ecb_functions'
ld.bfd: /tmp/ccdWw6Lo.ltrans0.ltrans.o:(.data.rel.ro.legacy_ciphers+0x30): undefined reference to `ossl_cast5128cbc_functions'
[...]
ld.bfd: /tmp/ccdWw6Lo.ltrans0.ltrans.o:(.data.rel.ro.legacy_digests+0x10): undefined reference to `ossl_md4_functions'
ld.bfd: /tmp/ccdWw6Lo.ltrans0.ltrans.o:(.data.rel.ro.legacy_digests+0x30): undefined reference to `ossl_ripemd160_functions'
collect2: error: ld returned 1 exit status
Signed-off-by: Christophe Sokol <christophe@wk3.org>
2023-07-16 08:01:17 +00:00
|
|
|
PKG_BUILD_FLAGS:=no-mips16 gc-sections no-lto
|
2006-06-11 00:41:05 +00:00
|
|
|
|
2019-03-11 21:00:58 +00:00
|
|
|
PKG_BUILD_PARALLEL:=1
|
2016-09-26 19:56:14 +00:00
|
|
|
|
2023-02-07 21:14:27 +00:00
|
|
|
PKG_BASE:=$(subst $(space),.,$(wordlist 1,2,$(subst .,$(space),$(PKG_VERSION))))
|
2006-09-23 13:59:21 +00:00
|
|
|
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
|
2017-03-22 06:31:20 +00:00
|
|
|
PKG_SOURCE_URL:= \
|
2024-09-18 15:10:16 +00:00
|
|
|
https://www.openssl.org/source/ \
|
|
|
|
|
https://www.openssl.org/source/old/$(PKG_BASE)/ \
|
|
|
|
|
https://github.com/openssl/openssl/releases/download/$(PKG_NAME)-$(PKG_VERSION)/
|
2021-02-19 01:30:14 +00:00
|
|
|
|
2024-09-05 08:21:57 +00:00
|
|
|
PKG_HASH:=23c666d0edf20f14249b3d8f0368acaee9ab585b09e1de82107c66e1f3ec9533
|
2006-06-11 00:41:05 +00:00
|
|
|
|
2023-02-07 21:14:27 +00:00
|
|
|
PKG_LICENSE:=Apache-2.0
|
2012-10-19 15:34:28 +00:00
|
|
|
PKG_LICENSE_FILES:=LICENSE
|
2019-08-05 18:34:37 +00:00
|
|
|
PKG_MAINTAINER:=Eneas U de Queiroz <cotequeiroz@gmail.com>
|
2017-09-28 02:55:46 +00:00
|
|
|
PKG_CPE_ID:=cpe:/a:openssl:openssl
|
2014-10-30 13:11:04 +00:00
|
|
|
PKG_CONFIG_DEPENDS:= \
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
CONFIG_OPENSSL_ENGINE \
|
2019-02-27 21:39:18 +00:00
|
|
|
CONFIG_OPENSSL_ENGINE_BUILTIN \
|
|
|
|
|
CONFIG_OPENSSL_ENGINE_BUILTIN_AFALG \
|
|
|
|
|
CONFIG_OPENSSL_ENGINE_BUILTIN_DEVCRYPTO \
|
|
|
|
|
CONFIG_OPENSSL_ENGINE_BUILTIN_PADLOCK \
|
2018-10-30 19:38:34 +00:00
|
|
|
CONFIG_OPENSSL_NO_DEPRECATED \
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
CONFIG_OPENSSL_OPTIMIZE_SPEED \
|
2018-10-24 19:28:59 +00:00
|
|
|
CONFIG_OPENSSL_PREFER_CHACHA_OVER_GCM \
|
openssl: avoid OPENSSL_SMALL_FOOTPRINT, no-asm
Building openssl with OPENSSL_SMALL_FOOTPRINT yelds only from 1% to 3%
decrease in size, dropping performance from 2% to 91%, depending on the
target and algorithm.
For example, using AES256-GCM with 1456-bytes operations, X86_64 appears
to be the least affected with 2% performance penalty and 1% reduction in
size; mips drops performance by 13%, size by 3%; Arm drops 29% in
performance, 2% in size.
On aarch64, it slows down ghash so much that I consider it broken
(-91%). SMALL_FOOTPRINT will reduce AES256-GCM performance by 88%, and
size by only 1%. It makes an AES-capable CPU run AES128-GCM at 35% of
the speed of Chacha20-Poly1305:
Block-size=1456 bytes AES256-GCM AES128-GCM ChaCha20-Poly1305
SMALL_FOOTPRINT 62014.44 65063.23 177090.50
regular 504220.08 565630.28 182706.16
OpenSSL 1.1.1 numbers are about the same, so this should have been
noticed a long time ago.
This creates an option to use OPENSSL_SMALL_FOOTPRINT, but it is turned
off by default unless SMALL_FLASH or LOW_MEMORY_FOOTPRINT is used.
Compiling with -O3 instead of -Os, for comparison, will increase size by
about 14-15%, with no measureable effect on AES256-GCM performance, and
about 2% increase in Chacha20-Poly1305 performance on Aarch64.
There are no Arm devices with the small flash feature, so drop the
conditional default. The package is built on phase2, so even if we
include an Arm device with small flash later, a no-asm library would
have to be built from source anyway.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2023-03-10 20:21:11 +00:00
|
|
|
CONFIG_OPENSSL_SMALL_FOOTPRINT \
|
2018-10-24 14:25:00 +00:00
|
|
|
CONFIG_OPENSSL_WITH_ARIA \
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
CONFIG_OPENSSL_WITH_ASM \
|
2018-10-24 14:25:00 +00:00
|
|
|
CONFIG_OPENSSL_WITH_ASYNC \
|
|
|
|
|
CONFIG_OPENSSL_WITH_BLAKE2 \
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
CONFIG_OPENSSL_WITH_CAMELLIA \
|
2018-10-24 14:25:00 +00:00
|
|
|
CONFIG_OPENSSL_WITH_CHACHA_POLY1305 \
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
CONFIG_OPENSSL_WITH_CMS \
|
2016-05-20 11:39:12 +00:00
|
|
|
CONFIG_OPENSSL_WITH_COMPRESSION \
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
CONFIG_OPENSSL_WITH_DTLS \
|
|
|
|
|
CONFIG_OPENSSL_WITH_EC2M \
|
|
|
|
|
CONFIG_OPENSSL_WITH_ERROR_MESSAGES \
|
|
|
|
|
CONFIG_OPENSSL_WITH_IDEA \
|
|
|
|
|
CONFIG_OPENSSL_WITH_MDC2 \
|
2016-05-20 15:23:28 +00:00
|
|
|
CONFIG_OPENSSL_WITH_NPN \
|
2016-06-10 10:02:15 +00:00
|
|
|
CONFIG_OPENSSL_WITH_PSK \
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
CONFIG_OPENSSL_WITH_RFC3779 \
|
|
|
|
|
CONFIG_OPENSSL_WITH_SEED \
|
2018-10-24 14:25:00 +00:00
|
|
|
CONFIG_OPENSSL_WITH_SM234 \
|
2017-11-04 19:45:30 +00:00
|
|
|
CONFIG_OPENSSL_WITH_SRP \
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
CONFIG_OPENSSL_WITH_SSE2 \
|
2018-10-24 14:25:00 +00:00
|
|
|
CONFIG_OPENSSL_WITH_TLS13 \
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
CONFIG_OPENSSL_WITH_WHIRLPOOL
|
2008-11-18 20:52:33 +00:00
|
|
|
|
2006-06-21 02:32:39 +00:00
|
|
|
include $(INCLUDE_DIR)/package.mk
|
openssl: add legacy provider
This adapts the engine build infrastructure to allow building providers,
and packages the legacy provider. Providers are the successors of
engines, which have been deprecated.
The legacy provider supplies OpenSSL implementations of algorithms that
have been deemed legacy, including DES, IDEA, MDC2, SEED, and Whirlpool.
Even though these algorithms are implemented in a separate package,
their removal makes the regular library smaller by 3%, so the build
options will remain to allow lean custom builds. Their defaults will
change to 'y' if not bulding for a small flash, so that the regular
legacy package will contain a complete set of algorithms.
The engine build and configuration structure was changed to accomodate
providers, and adapt to the new style of openssl.cnf in version 3.0.
There is not a clean upgrade path for the /etc/ssl/openssl.cnf file,
installed by the openssl-conf package. It is recommended to rename or
remove the old config file when flashing an image with the updated
openssl-conf package, then apply the changes manually.
An old openssl.cnf file will silently work, but new engine or provider
packages will not be enabled. Any remaining engine config files under
/etc/ssl/engines.cnf.d can be removed.
On the build side, the include file used by engine packages was renamed
to openssl-module.mk, so the engine packages in other feeds need to
adapt.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2023-03-10 20:53:25 +00:00
|
|
|
include $(INCLUDE_DIR)/openssl-module.mk
|
2006-06-11 00:41:05 +00:00
|
|
|
|
2014-10-20 11:19:53 +00:00
|
|
|
ifneq ($(CONFIG_CCACHE),)
|
|
|
|
|
HOSTCC=$(HOSTCC_NOCACHE)
|
|
|
|
|
HOSTCXX=$(HOSTCXX_NOCACHE)
|
|
|
|
|
endif
|
|
|
|
|
|
2006-09-23 13:59:21 +00:00
|
|
|
define Package/openssl/Default
|
|
|
|
|
TITLE:=Open source SSL toolkit
|
2024-09-18 15:10:16 +00:00
|
|
|
URL:=https://www.openssl.org/
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
SECTION:=libs
|
|
|
|
|
CATEGORY:=Libraries
|
2006-09-23 13:59:21 +00:00
|
|
|
endef
|
|
|
|
|
|
2010-01-28 19:28:06 +00:00
|
|
|
define Package/libopenssl/config
|
|
|
|
|
source "$(SOURCE)/Config.in"
|
|
|
|
|
endef
|
|
|
|
|
|
2007-09-07 08:34:51 +00:00
|
|
|
define Package/openssl/Default/description
|
2010-03-14 01:47:55 +00:00
|
|
|
The OpenSSL Project is a collaborative effort to develop a robust,
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
commercial-grade, full-featured, and Open Source toolkit implementing the
|
|
|
|
|
Transport Layer Security (TLS) protocol as well as a full-strength
|
|
|
|
|
general-purpose cryptography library.
|
2007-09-07 08:34:51 +00:00
|
|
|
endef
|
|
|
|
|
|
2006-06-18 17:46:02 +00:00
|
|
|
define Package/libopenssl
|
2007-09-07 08:34:51 +00:00
|
|
|
$(call Package/openssl/Default)
|
2009-05-26 15:04:50 +00:00
|
|
|
SUBMENU:=SSL
|
2019-02-27 21:39:18 +00:00
|
|
|
DEPENDS:=+OPENSSL_WITH_COMPRESSION:zlib \
|
|
|
|
|
+OPENSSL_ENGINE_BUILTIN_AFALG:kmod-crypto-user \
|
|
|
|
|
+OPENSSL_ENGINE_BUILTIN_DEVCRYPTO:kmod-cryptodev \
|
2023-02-07 21:14:27 +00:00
|
|
|
+OPENSSL_ENGINE_BUILTIN_PADLOCK:kmod-crypto-hw-padlock \
|
2023-02-21 20:55:26 +00:00
|
|
|
+(arm||armeb||mips||mipsel||powerpc||arc):libatomic
|
2006-09-23 13:59:21 +00:00
|
|
|
TITLE+= (libraries)
|
2023-02-07 21:14:27 +00:00
|
|
|
ABI_VERSION:=$(firstword $(subst .,$(space),$(PKG_VERSION)))
|
2010-04-16 10:50:45 +00:00
|
|
|
MENU:=1
|
2007-09-07 08:34:51 +00:00
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define Package/libopenssl/description
|
|
|
|
|
$(call Package/openssl/Default/description)
|
2010-03-14 01:47:55 +00:00
|
|
|
This package contains the OpenSSL shared libraries, needed by other programs.
|
2006-06-18 17:46:02 +00:00
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define Package/openssl-util
|
2006-09-23 13:59:21 +00:00
|
|
|
$(call Package/openssl/Default)
|
|
|
|
|
SECTION:=utils
|
|
|
|
|
CATEGORY:=Utilities
|
2019-01-30 10:42:11 +00:00
|
|
|
DEPENDS:=+libopenssl +libopenssl-conf
|
2006-09-23 13:59:21 +00:00
|
|
|
TITLE+= (utility)
|
2006-06-18 17:46:02 +00:00
|
|
|
endef
|
|
|
|
|
|
2019-01-30 10:42:11 +00:00
|
|
|
define Package/openssl-util/description
|
|
|
|
|
$(call Package/openssl/Default/description)
|
|
|
|
|
This package contains the OpenSSL command-line utility.
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define Package/libopenssl-conf
|
|
|
|
|
$(call Package/openssl/Default)
|
|
|
|
|
SUBMENU:=SSL
|
|
|
|
|
TITLE:=/etc/ssl/openssl.cnf config file
|
|
|
|
|
DEPENDS:=libopenssl
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define Package/libopenssl-conf/conffiles
|
2006-06-18 17:46:02 +00:00
|
|
|
/etc/ssl/openssl.cnf
|
openssl: add legacy provider
This adapts the engine build infrastructure to allow building providers,
and packages the legacy provider. Providers are the successors of
engines, which have been deprecated.
The legacy provider supplies OpenSSL implementations of algorithms that
have been deemed legacy, including DES, IDEA, MDC2, SEED, and Whirlpool.
Even though these algorithms are implemented in a separate package,
their removal makes the regular library smaller by 3%, so the build
options will remain to allow lean custom builds. Their defaults will
change to 'y' if not bulding for a small flash, so that the regular
legacy package will contain a complete set of algorithms.
The engine build and configuration structure was changed to accomodate
providers, and adapt to the new style of openssl.cnf in version 3.0.
There is not a clean upgrade path for the /etc/ssl/openssl.cnf file,
installed by the openssl-conf package. It is recommended to rename or
remove the old config file when flashing an image with the updated
openssl-conf package, then apply the changes manually.
An old openssl.cnf file will silently work, but new engine or provider
packages will not be enabled. Any remaining engine config files under
/etc/ssl/engines.cnf.d can be removed.
On the build side, the include file used by engine packages was renamed
to openssl-module.mk, so the engine packages in other feeds need to
adapt.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2023-03-10 20:53:25 +00:00
|
|
|
$(if $(CONFIG_OPENSSL_ENGINE_BUILTIN_DEVCRYPTO),/etc/ssl/modules.cnf.d/devcrypto.cnf)
|
|
|
|
|
$(if $(CONFIG_OPENSSL_ENGINE_BUILTIN_PADLOCK),/etc/ssl/modules.cnf.d/padlock.cnf)
|
2006-06-18 17:46:02 +00:00
|
|
|
endef
|
|
|
|
|
|
2019-01-30 10:42:11 +00:00
|
|
|
define Package/libopenssl-conf/description
|
2007-09-07 08:34:51 +00:00
|
|
|
$(call Package/openssl/Default/description)
|
2019-01-30 10:42:11 +00:00
|
|
|
This package installs the OpenSSL configuration file /etc/ssl/openssl.cnf.
|
2007-09-07 08:34:51 +00:00
|
|
|
endef
|
|
|
|
|
|
2023-03-14 21:51:45 +00:00
|
|
|
ifneq ($(CONFIG_OPENSSL_ENGINE_BUILTIN_PADLOCK)$(CONFIG_OPENSSL_ENGINE_BUILTIN_DEVCRYPTO),)
|
|
|
|
|
define Package/libopenssl-conf/postinst
|
|
|
|
|
#!/bin/sh
|
|
|
|
|
|
|
|
|
|
add_engine_config() {
|
|
|
|
|
if [ -z "$${IPKG_INSTROOT}" ] && uci -q get "openssl.$$1" >/dev/null; then
|
|
|
|
|
[ "$$(uci -q get "openssl.$$1.builtin")" = 1 ] && return
|
|
|
|
|
uci set "openssl.$$1.builtin=1" && uci commit openssl
|
|
|
|
|
return
|
|
|
|
|
fi
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
$(if $(CONFIG_OPENSSL_ENGINE_BUILTIN_DEVCRYPTO),add_engine_config devcrypto)
|
|
|
|
|
$(if $(CONFIG_OPENSSL_ENGINE_BUILTIN_PADLOCK),add_engine_config padlock)
|
|
|
|
|
endef
|
|
|
|
|
endif
|
|
|
|
|
|
openssl: add legacy provider
This adapts the engine build infrastructure to allow building providers,
and packages the legacy provider. Providers are the successors of
engines, which have been deprecated.
The legacy provider supplies OpenSSL implementations of algorithms that
have been deemed legacy, including DES, IDEA, MDC2, SEED, and Whirlpool.
Even though these algorithms are implemented in a separate package,
their removal makes the regular library smaller by 3%, so the build
options will remain to allow lean custom builds. Their defaults will
change to 'y' if not bulding for a small flash, so that the regular
legacy package will contain a complete set of algorithms.
The engine build and configuration structure was changed to accomodate
providers, and adapt to the new style of openssl.cnf in version 3.0.
There is not a clean upgrade path for the /etc/ssl/openssl.cnf file,
installed by the openssl-conf package. It is recommended to rename or
remove the old config file when flashing an image with the updated
openssl-conf package, then apply the changes manually.
An old openssl.cnf file will silently work, but new engine or provider
packages will not be enabled. Any remaining engine config files under
/etc/ssl/engines.cnf.d can be removed.
On the build side, the include file used by engine packages was renamed
to openssl-module.mk, so the engine packages in other feeds need to
adapt.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2023-03-10 20:53:25 +00:00
|
|
|
$(eval $(call Package/openssl/add-provider,legacy))
|
|
|
|
|
define Package/libopenssl-legacy
|
|
|
|
|
$(call Package/openssl/Default)
|
|
|
|
|
$(call Package/openssl/module/Default)
|
|
|
|
|
TITLE:=OpenSSL legacy provider
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define Package/libopenssl-legacy/description
|
|
|
|
|
The OpenSSL legacy provider supplies OpenSSL implementations of algorithms that
|
|
|
|
|
have been deemed legacy. Such algorithms have commonly fallen out of use, have
|
|
|
|
|
been deemed insecure by the cryptography community, or something similar. See
|
|
|
|
|
https://www.openssl.org/docs/man3.0/man7/OSSL_PROVIDER-legacy.html
|
|
|
|
|
endef
|
|
|
|
|
|
2022-02-21 00:09:29 +00:00
|
|
|
$(eval $(call Package/openssl/add-engine,afalg))
|
2018-10-24 14:25:00 +00:00
|
|
|
define Package/libopenssl-afalg
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
$(call Package/openssl/Default)
|
2022-02-21 00:09:29 +00:00
|
|
|
$(call Package/openssl/engine/Default)
|
2018-10-24 14:25:00 +00:00
|
|
|
TITLE:=AFALG hardware acceleration engine
|
2022-02-21 00:09:29 +00:00
|
|
|
DEPENDS += @KERNEL_AIO +PACKAGE_libopenssl-afalg:kmod-crypto-user \
|
|
|
|
|
@!OPENSSL_ENGINE_BUILTIN
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
endef
|
|
|
|
|
|
2018-10-24 14:25:00 +00:00
|
|
|
define Package/libopenssl-afalg/description
|
|
|
|
|
This package adds an engine that enables hardware acceleration
|
|
|
|
|
through the AF_ALG kernel interface.
|
openssl: add legacy provider
This adapts the engine build infrastructure to allow building providers,
and packages the legacy provider. Providers are the successors of
engines, which have been deprecated.
The legacy provider supplies OpenSSL implementations of algorithms that
have been deemed legacy, including DES, IDEA, MDC2, SEED, and Whirlpool.
Even though these algorithms are implemented in a separate package,
their removal makes the regular library smaller by 3%, so the build
options will remain to allow lean custom builds. Their defaults will
change to 'y' if not bulding for a small flash, so that the regular
legacy package will contain a complete set of algorithms.
The engine build and configuration structure was changed to accomodate
providers, and adapt to the new style of openssl.cnf in version 3.0.
There is not a clean upgrade path for the /etc/ssl/openssl.cnf file,
installed by the openssl-conf package. It is recommended to rename or
remove the old config file when flashing an image with the updated
openssl-conf package, then apply the changes manually.
An old openssl.cnf file will silently work, but new engine or provider
packages will not be enabled. Any remaining engine config files under
/etc/ssl/engines.cnf.d can be removed.
On the build side, the include file used by engine packages was renamed
to openssl-module.mk, so the engine packages in other feeds need to
adapt.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2023-03-10 20:53:25 +00:00
|
|
|
See https://www.openssl.org/docs/man3.0/man5/config.html#Engine-Configuration
|
2019-03-12 13:16:01 +00:00
|
|
|
and https://openwrt.org/docs/techref/hardware/cryptographic.hardware.accelerators
|
2018-10-24 14:25:00 +00:00
|
|
|
The engine_id is "afalg"
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
endef
|
2007-09-07 08:34:51 +00:00
|
|
|
|
2022-02-21 00:09:29 +00:00
|
|
|
$(eval $(call Package/openssl/add-engine,devcrypto))
|
2019-02-27 21:39:18 +00:00
|
|
|
define Package/libopenssl-devcrypto
|
|
|
|
|
$(call Package/openssl/Default)
|
2022-02-21 00:09:29 +00:00
|
|
|
$(call Package/openssl/engine/Default)
|
2019-02-27 21:39:18 +00:00
|
|
|
TITLE:=/dev/crypto hardware acceleration engine
|
2022-02-21 00:09:29 +00:00
|
|
|
DEPENDS += +PACKAGE_libopenssl-devcrypto:kmod-cryptodev @!OPENSSL_ENGINE_BUILTIN
|
2019-02-27 21:39:18 +00:00
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define Package/libopenssl-devcrypto/description
|
|
|
|
|
This package adds an engine that enables hardware acceleration
|
|
|
|
|
through the /dev/crypto kernel interface.
|
openssl: add legacy provider
This adapts the engine build infrastructure to allow building providers,
and packages the legacy provider. Providers are the successors of
engines, which have been deprecated.
The legacy provider supplies OpenSSL implementations of algorithms that
have been deemed legacy, including DES, IDEA, MDC2, SEED, and Whirlpool.
Even though these algorithms are implemented in a separate package,
their removal makes the regular library smaller by 3%, so the build
options will remain to allow lean custom builds. Their defaults will
change to 'y' if not bulding for a small flash, so that the regular
legacy package will contain a complete set of algorithms.
The engine build and configuration structure was changed to accomodate
providers, and adapt to the new style of openssl.cnf in version 3.0.
There is not a clean upgrade path for the /etc/ssl/openssl.cnf file,
installed by the openssl-conf package. It is recommended to rename or
remove the old config file when flashing an image with the updated
openssl-conf package, then apply the changes manually.
An old openssl.cnf file will silently work, but new engine or provider
packages will not be enabled. Any remaining engine config files under
/etc/ssl/engines.cnf.d can be removed.
On the build side, the include file used by engine packages was renamed
to openssl-module.mk, so the engine packages in other feeds need to
adapt.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2023-03-10 20:53:25 +00:00
|
|
|
See https://www.openssl.org/docs/man3.0/man5/config.html#Engine-Configuration
|
2019-03-12 13:16:01 +00:00
|
|
|
and https://openwrt.org/docs/techref/hardware/cryptographic.hardware.accelerators
|
2019-02-27 21:39:18 +00:00
|
|
|
The engine_id is "devcrypto"
|
|
|
|
|
endef
|
|
|
|
|
|
2022-02-21 00:09:29 +00:00
|
|
|
$(eval $(call Package/openssl/add-engine,padlock))
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
define Package/libopenssl-padlock
|
|
|
|
|
$(call Package/openssl/Default)
|
2022-02-21 00:09:29 +00:00
|
|
|
$(call Package/openssl/engine/Default)
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
TITLE:=VIA Padlock hardware acceleration engine
|
2022-02-21 00:09:29 +00:00
|
|
|
DEPENDS += @TARGET_x86 +PACKAGE_libopenssl-padlock:kmod-crypto-hw-padlock \
|
|
|
|
|
@!OPENSSL_ENGINE_BUILTIN
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
endef
|
2010-01-28 19:28:06 +00:00
|
|
|
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
define Package/libopenssl-padlock/description
|
|
|
|
|
This package adds an engine that enables VIA Padlock hardware acceleration.
|
openssl: add legacy provider
This adapts the engine build infrastructure to allow building providers,
and packages the legacy provider. Providers are the successors of
engines, which have been deprecated.
The legacy provider supplies OpenSSL implementations of algorithms that
have been deemed legacy, including DES, IDEA, MDC2, SEED, and Whirlpool.
Even though these algorithms are implemented in a separate package,
their removal makes the regular library smaller by 3%, so the build
options will remain to allow lean custom builds. Their defaults will
change to 'y' if not bulding for a small flash, so that the regular
legacy package will contain a complete set of algorithms.
The engine build and configuration structure was changed to accomodate
providers, and adapt to the new style of openssl.cnf in version 3.0.
There is not a clean upgrade path for the /etc/ssl/openssl.cnf file,
installed by the openssl-conf package. It is recommended to rename or
remove the old config file when flashing an image with the updated
openssl-conf package, then apply the changes manually.
An old openssl.cnf file will silently work, but new engine or provider
packages will not be enabled. Any remaining engine config files under
/etc/ssl/engines.cnf.d can be removed.
On the build side, the include file used by engine packages was renamed
to openssl-module.mk, so the engine packages in other feeds need to
adapt.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2023-03-10 20:53:25 +00:00
|
|
|
See https://www.openssl.org/docs/man3.0/man5/config.html#Engine-Configuration
|
2019-03-12 13:16:01 +00:00
|
|
|
and https://openwrt.org/docs/techref/hardware/cryptographic.hardware.accelerators
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
The engine_id is "padlock"
|
|
|
|
|
endef
|
|
|
|
|
|
2023-02-07 21:14:27 +00:00
|
|
|
OPENSSL_OPTIONS:= shared no-tests
|
2018-10-24 14:25:00 +00:00
|
|
|
|
|
|
|
|
ifndef CONFIG_OPENSSL_WITH_BLAKE2
|
|
|
|
|
OPENSSL_OPTIONS += no-blake2
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
ifndef CONFIG_OPENSSL_WITH_CHACHA_POLY1305
|
|
|
|
|
OPENSSL_OPTIONS += no-chacha no-poly1305
|
2018-10-24 19:28:59 +00:00
|
|
|
else
|
|
|
|
|
ifdef CONFIG_OPENSSL_PREFER_CHACHA_OVER_GCM
|
|
|
|
|
OPENSSL_OPTIONS += -DOPENSSL_PREFER_CHACHA_OVER_GCM
|
|
|
|
|
endif
|
2018-10-24 14:25:00 +00:00
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
ifndef CONFIG_OPENSSL_WITH_ASYNC
|
|
|
|
|
OPENSSL_OPTIONS += no-async
|
|
|
|
|
endif
|
2010-01-28 19:28:06 +00:00
|
|
|
|
2013-07-24 12:37:55 +00:00
|
|
|
ifndef CONFIG_OPENSSL_WITH_EC2M
|
|
|
|
|
OPENSSL_OPTIONS += no-ec2m
|
|
|
|
|
endif
|
|
|
|
|
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
ifndef CONFIG_OPENSSL_WITH_ERROR_MESSAGES
|
|
|
|
|
OPENSSL_OPTIONS += no-err
|
|
|
|
|
endif
|
|
|
|
|
|
2018-10-24 14:25:00 +00:00
|
|
|
ifndef CONFIG_OPENSSL_WITH_TLS13
|
|
|
|
|
OPENSSL_OPTIONS += no-tls1_3
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
ifndef CONFIG_OPENSSL_WITH_ARIA
|
|
|
|
|
OPENSSL_OPTIONS += no-aria
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
ifndef CONFIG_OPENSSL_WITH_SM234
|
|
|
|
|
OPENSSL_OPTIONS += no-sm2 no-sm3 no-sm4
|
|
|
|
|
endif
|
|
|
|
|
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
ifndef CONFIG_OPENSSL_WITH_CAMELLIA
|
|
|
|
|
OPENSSL_OPTIONS += no-camellia
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
ifndef CONFIG_OPENSSL_WITH_IDEA
|
|
|
|
|
OPENSSL_OPTIONS += no-idea
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
ifndef CONFIG_OPENSSL_WITH_SEED
|
|
|
|
|
OPENSSL_OPTIONS += no-seed
|
2014-10-30 13:11:04 +00:00
|
|
|
endif
|
|
|
|
|
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
ifndef CONFIG_OPENSSL_WITH_MDC2
|
|
|
|
|
OPENSSL_OPTIONS += no-mdc2
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
ifndef CONFIG_OPENSSL_WITH_WHIRLPOOL
|
|
|
|
|
OPENSSL_OPTIONS += no-whirlpool
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
ifndef CONFIG_OPENSSL_WITH_CMS
|
|
|
|
|
OPENSSL_OPTIONS += no-cms
|
|
|
|
|
endif
|
|
|
|
|
|
2018-10-24 14:25:00 +00:00
|
|
|
ifndef CONFIG_OPENSSL_WITH_RFC3779
|
|
|
|
|
OPENSSL_OPTIONS += no-rfc3779
|
2015-12-09 22:26:40 +00:00
|
|
|
endif
|
|
|
|
|
|
2018-10-30 19:38:34 +00:00
|
|
|
ifdef CONFIG_OPENSSL_NO_DEPRECATED
|
2016-05-19 11:52:45 +00:00
|
|
|
OPENSSL_OPTIONS += no-deprecated
|
|
|
|
|
endif
|
|
|
|
|
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
ifeq ($(CONFIG_OPENSSL_OPTIMIZE_SPEED),y)
|
|
|
|
|
TARGET_CFLAGS := $(filter-out -O%,$(TARGET_CFLAGS)) -O3
|
openssl: avoid OPENSSL_SMALL_FOOTPRINT, no-asm
Building openssl with OPENSSL_SMALL_FOOTPRINT yelds only from 1% to 3%
decrease in size, dropping performance from 2% to 91%, depending on the
target and algorithm.
For example, using AES256-GCM with 1456-bytes operations, X86_64 appears
to be the least affected with 2% performance penalty and 1% reduction in
size; mips drops performance by 13%, size by 3%; Arm drops 29% in
performance, 2% in size.
On aarch64, it slows down ghash so much that I consider it broken
(-91%). SMALL_FOOTPRINT will reduce AES256-GCM performance by 88%, and
size by only 1%. It makes an AES-capable CPU run AES128-GCM at 35% of
the speed of Chacha20-Poly1305:
Block-size=1456 bytes AES256-GCM AES128-GCM ChaCha20-Poly1305
SMALL_FOOTPRINT 62014.44 65063.23 177090.50
regular 504220.08 565630.28 182706.16
OpenSSL 1.1.1 numbers are about the same, so this should have been
noticed a long time ago.
This creates an option to use OPENSSL_SMALL_FOOTPRINT, but it is turned
off by default unless SMALL_FLASH or LOW_MEMORY_FOOTPRINT is used.
Compiling with -O3 instead of -Os, for comparison, will increase size by
about 14-15%, with no measureable effect on AES256-GCM performance, and
about 2% increase in Chacha20-Poly1305 performance on Aarch64.
There are no Arm devices with the small flash feature, so drop the
conditional default. The package is built on phase2, so even if we
include an Arm device with small flash later, a no-asm library would
have to be built from source anyway.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2023-03-10 20:21:11 +00:00
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
ifeq ($(CONFIG_OPENSSL_SMALL_FOOTPRINT),y)
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
OPENSSL_OPTIONS += -DOPENSSL_SMALL_FOOTPRINT
|
|
|
|
|
endif
|
|
|
|
|
|
|
|
|
|
ifdef CONFIG_OPENSSL_ENGINE
|
2019-02-27 21:39:18 +00:00
|
|
|
ifdef CONFIG_OPENSSL_ENGINE_BUILTIN
|
|
|
|
|
OPENSSL_OPTIONS += disable-dynamic-engine
|
|
|
|
|
ifndef CONFIG_OPENSSL_ENGINE_BUILTIN_AFALG
|
|
|
|
|
OPENSSL_OPTIONS += no-afalgeng
|
|
|
|
|
endif
|
|
|
|
|
ifdef CONFIG_OPENSSL_ENGINE_BUILTIN_DEVCRYPTO
|
|
|
|
|
OPENSSL_OPTIONS += enable-devcryptoeng
|
|
|
|
|
endif
|
|
|
|
|
ifndef CONFIG_OPENSSL_ENGINE_BUILTIN_PADLOCK
|
2023-02-07 21:14:27 +00:00
|
|
|
OPENSSL_OPTIONS += no-padlockeng
|
2019-02-27 21:39:18 +00:00
|
|
|
endif
|
|
|
|
|
else
|
|
|
|
|
ifdef CONFIG_PACKAGE_libopenssl-devcrypto
|
|
|
|
|
OPENSSL_OPTIONS += enable-devcryptoeng
|
|
|
|
|
endif
|
|
|
|
|
ifndef CONFIG_PACKAGE_libopenssl-afalg
|
|
|
|
|
OPENSSL_OPTIONS += no-afalgeng
|
|
|
|
|
endif
|
|
|
|
|
ifndef CONFIG_PACKAGE_libopenssl-padlock
|
2023-02-07 21:14:27 +00:00
|
|
|
OPENSSL_OPTIONS += no-padlockeng
|
2019-02-27 21:39:18 +00:00
|
|
|
endif
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
endif
|
|
|
|
|
else
|
|
|
|
|
OPENSSL_OPTIONS += no-engine
|
|
|
|
|
endif
|
|
|
|
|
|
2016-09-26 20:00:04 +00:00
|
|
|
ifndef CONFIG_OPENSSL_WITH_DTLS
|
2018-10-24 14:25:00 +00:00
|
|
|
OPENSSL_OPTIONS += no-dtls
|
2016-09-26 20:00:04 +00:00
|
|
|
endif
|
|
|
|
|
|
2016-05-19 13:59:55 +00:00
|
|
|
ifdef CONFIG_OPENSSL_WITH_COMPRESSION
|
|
|
|
|
OPENSSL_OPTIONS += zlib-dynamic
|
|
|
|
|
else
|
|
|
|
|
OPENSSL_OPTIONS += no-comp
|
|
|
|
|
endif
|
|
|
|
|
|
2016-05-20 11:39:12 +00:00
|
|
|
ifndef CONFIG_OPENSSL_WITH_NPN
|
|
|
|
|
OPENSSL_OPTIONS += no-nextprotoneg
|
|
|
|
|
endif
|
|
|
|
|
|
2016-05-20 15:23:28 +00:00
|
|
|
ifndef CONFIG_OPENSSL_WITH_PSK
|
|
|
|
|
OPENSSL_OPTIONS += no-psk
|
|
|
|
|
endif
|
|
|
|
|
|
2016-06-10 10:02:15 +00:00
|
|
|
ifndef CONFIG_OPENSSL_WITH_SRP
|
|
|
|
|
OPENSSL_OPTIONS += no-srp
|
|
|
|
|
endif
|
|
|
|
|
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
ifndef CONFIG_OPENSSL_WITH_ASM
|
|
|
|
|
OPENSSL_OPTIONS += no-asm
|
2017-11-04 19:45:30 +00:00
|
|
|
endif
|
|
|
|
|
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
ifdef CONFIG_i386
|
|
|
|
|
ifndef CONFIG_OPENSSL_WITH_SSE2
|
|
|
|
|
OPENSSL_OPTIONS += no-sse2
|
2012-09-24 15:23:57 +00:00
|
|
|
endif
|
2012-06-18 23:54:08 +00:00
|
|
|
endif
|
2006-09-23 13:59:21 +00:00
|
|
|
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
OPENSSL_TARGET:=linux-$(call qstrip,$(CONFIG_ARCH))-openwrt
|
|
|
|
|
|
2021-05-09 20:28:15 +00:00
|
|
|
STAMP_CONFIGURED := $(STAMP_CONFIGURED)_$(shell echo $(OPENSSL_OPTIONS) | $(MKHASH) md5)
|
2014-03-09 13:19:29 +00:00
|
|
|
|
2006-06-11 00:41:05 +00:00
|
|
|
define Build/Configure
|
|
|
|
|
(cd $(PKG_BUILD_DIR); \
|
2012-06-18 23:54:08 +00:00
|
|
|
./Configure $(OPENSSL_TARGET) \
|
2006-09-23 13:59:21 +00:00
|
|
|
--prefix=/usr \
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
--libdir=lib \
|
2006-09-23 13:59:21 +00:00
|
|
|
--openssldir=/etc/ssl \
|
2020-11-28 21:06:33 +00:00
|
|
|
--cross-compile-prefix="$(TARGET_CROSS)" \
|
2023-06-14 09:25:03 +00:00
|
|
|
$(TARGET_CFLAGS) \
|
2007-09-03 05:00:38 +00:00
|
|
|
$(TARGET_CPPFLAGS) \
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
$(TARGET_LDFLAGS) \
|
2019-02-27 21:06:44 +00:00
|
|
|
$(OPENSSL_OPTIONS) && \
|
|
|
|
|
{ [ -f $(STAMP_CONFIGURED) ] || make clean; } \
|
2006-06-11 00:41:05 +00:00
|
|
|
)
|
2014-03-09 13:19:25 +00:00
|
|
|
endef
|
|
|
|
|
|
2023-02-02 20:16:21 +00:00
|
|
|
TARGET_CFLAGS += $(FPIC)
|
2014-03-09 13:19:25 +00:00
|
|
|
|
|
|
|
|
define Build/Compile
|
2013-09-10 12:09:13 +00:00
|
|
|
+$(MAKE) $(PKG_JOBS) -C $(PKG_BUILD_DIR) \
|
2010-03-14 01:47:55 +00:00
|
|
|
CC="$(TARGET_CC)" \
|
2018-10-24 14:25:00 +00:00
|
|
|
SOURCE_DATE_EPOCH=$(SOURCE_DATE_EPOCH) \
|
2010-03-14 01:47:55 +00:00
|
|
|
OPENWRT_OPTIMIZATION_FLAGS="$(TARGET_CFLAGS)" \
|
|
|
|
|
$(OPENSSL_MAKEFLAGS) \
|
|
|
|
|
all
|
2006-10-18 22:12:24 +00:00
|
|
|
$(MAKE) -C $(PKG_BUILD_DIR) \
|
2012-03-18 19:46:01 +00:00
|
|
|
CC="$(TARGET_CC)" \
|
2018-10-24 14:25:00 +00:00
|
|
|
DESTDIR="$(PKG_INSTALL_DIR)" \
|
2009-12-16 02:03:20 +00:00
|
|
|
$(OPENSSL_MAKEFLAGS) \
|
2018-10-24 14:25:00 +00:00
|
|
|
install_sw install_ssldirs
|
2006-06-11 00:41:05 +00:00
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define Build/InstallDev
|
2010-03-14 01:47:55 +00:00
|
|
|
$(INSTALL_DIR) $(1)/usr/include
|
2007-09-28 01:45:11 +00:00
|
|
|
$(CP) $(PKG_INSTALL_DIR)/usr/include/openssl $(1)/usr/include/
|
2010-03-14 01:47:55 +00:00
|
|
|
$(INSTALL_DIR) $(1)/usr/lib/
|
2007-09-28 01:45:11 +00:00
|
|
|
$(CP) $(PKG_INSTALL_DIR)/usr/lib/lib{crypto,ssl}.{a,so*} $(1)/usr/lib/
|
2010-03-14 01:47:55 +00:00
|
|
|
$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
|
2007-09-28 01:45:11 +00:00
|
|
|
$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/{openssl,libcrypto,libssl}.pc $(1)/usr/lib/pkgconfig/
|
2012-01-18 14:48:16 +00:00
|
|
|
[ -n "$(TARGET_LDFLAGS)" ] && $(SED) 's#$(TARGET_LDFLAGS)##g' $(1)/usr/lib/pkgconfig/{openssl,libcrypto,libssl}.pc || true
|
2006-06-11 00:41:05 +00:00
|
|
|
endef
|
2006-09-23 13:59:21 +00:00
|
|
|
|
2006-06-11 00:41:05 +00:00
|
|
|
define Package/libopenssl/install
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
$(INSTALL_DIR) $(1)/etc/ssl/certs
|
|
|
|
|
$(INSTALL_DIR) $(1)/etc/ssl/private
|
|
|
|
|
chmod 0700 $(1)/etc/ssl/private
|
2006-11-23 00:29:07 +00:00
|
|
|
$(INSTALL_DIR) $(1)/usr/lib
|
2009-06-29 20:48:58 +00:00
|
|
|
$(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/lib/libcrypto.so.* $(1)/usr/lib/
|
|
|
|
|
$(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/lib/libssl.so.* $(1)/usr/lib/
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
$(if $(CONFIG_OPENSSL_ENGINE),$(INSTALL_DIR) $(1)/usr/lib/$(ENGINES_DIR))
|
2006-06-11 00:41:05 +00:00
|
|
|
endef
|
|
|
|
|
|
2019-01-30 10:42:11 +00:00
|
|
|
define Package/libopenssl-conf/install
|
openssl: add legacy provider
This adapts the engine build infrastructure to allow building providers,
and packages the legacy provider. Providers are the successors of
engines, which have been deprecated.
The legacy provider supplies OpenSSL implementations of algorithms that
have been deemed legacy, including DES, IDEA, MDC2, SEED, and Whirlpool.
Even though these algorithms are implemented in a separate package,
their removal makes the regular library smaller by 3%, so the build
options will remain to allow lean custom builds. Their defaults will
change to 'y' if not bulding for a small flash, so that the regular
legacy package will contain a complete set of algorithms.
The engine build and configuration structure was changed to accomodate
providers, and adapt to the new style of openssl.cnf in version 3.0.
There is not a clean upgrade path for the /etc/ssl/openssl.cnf file,
installed by the openssl-conf package. It is recommended to rename or
remove the old config file when flashing an image with the updated
openssl-conf package, then apply the changes manually.
An old openssl.cnf file will silently work, but new engine or provider
packages will not be enabled. Any remaining engine config files under
/etc/ssl/engines.cnf.d can be removed.
On the build side, the include file used by engine packages was renamed
to openssl-module.mk, so the engine packages in other feeds need to
adapt.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2023-03-10 20:53:25 +00:00
|
|
|
$(INSTALL_DIR) $(1)/etc/ssl/modules.cnf.d $(1)/etc/config $(1)/etc/init.d
|
2006-06-11 00:41:05 +00:00
|
|
|
$(CP) $(PKG_INSTALL_DIR)/etc/ssl/openssl.cnf $(1)/etc/ssl/
|
2022-02-21 00:09:30 +00:00
|
|
|
$(INSTALL_BIN) ./files/openssl.init $(1)/etc/init.d/openssl
|
|
|
|
|
$(SED) 's!%ENGINES_DIR%!/usr/lib/$(ENGINES_DIR)!' $(1)/etc/init.d/openssl
|
|
|
|
|
touch $(1)/etc/config/openssl
|
2024-06-09 01:02:30 +00:00
|
|
|
$(if $(CONFIG_OPENSSL_ENGINE),,
|
|
|
|
|
$(SED) 's!engines = engines_sect!#&!' $(1)/etc/ssl/openssl.cnf)
|
2022-02-21 00:09:29 +00:00
|
|
|
$(if $(CONFIG_OPENSSL_ENGINE_BUILTIN_DEVCRYPTO),
|
openssl: add legacy provider
This adapts the engine build infrastructure to allow building providers,
and packages the legacy provider. Providers are the successors of
engines, which have been deprecated.
The legacy provider supplies OpenSSL implementations of algorithms that
have been deemed legacy, including DES, IDEA, MDC2, SEED, and Whirlpool.
Even though these algorithms are implemented in a separate package,
their removal makes the regular library smaller by 3%, so the build
options will remain to allow lean custom builds. Their defaults will
change to 'y' if not bulding for a small flash, so that the regular
legacy package will contain a complete set of algorithms.
The engine build and configuration structure was changed to accomodate
providers, and adapt to the new style of openssl.cnf in version 3.0.
There is not a clean upgrade path for the /etc/ssl/openssl.cnf file,
installed by the openssl-conf package. It is recommended to rename or
remove the old config file when flashing an image with the updated
openssl-conf package, then apply the changes manually.
An old openssl.cnf file will silently work, but new engine or provider
packages will not be enabled. Any remaining engine config files under
/etc/ssl/engines.cnf.d can be removed.
On the build side, the include file used by engine packages was renamed
to openssl-module.mk, so the engine packages in other feeds need to
adapt.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2023-03-10 20:53:25 +00:00
|
|
|
$(CP) ./files/devcrypto.cnf $(1)/etc/ssl/modules.cnf.d/
|
2023-06-01 07:22:26 +00:00
|
|
|
echo -e "config engine 'devcrypto'\n\toption enabled '1'\n\toption builtin '1'" >> $(1)/etc/config/openssl)
|
2022-02-21 00:09:29 +00:00
|
|
|
$(if $(CONFIG_OPENSSL_ENGINE_BUILTIN_PADLOCK),
|
openssl: add legacy provider
This adapts the engine build infrastructure to allow building providers,
and packages the legacy provider. Providers are the successors of
engines, which have been deprecated.
The legacy provider supplies OpenSSL implementations of algorithms that
have been deemed legacy, including DES, IDEA, MDC2, SEED, and Whirlpool.
Even though these algorithms are implemented in a separate package,
their removal makes the regular library smaller by 3%, so the build
options will remain to allow lean custom builds. Their defaults will
change to 'y' if not bulding for a small flash, so that the regular
legacy package will contain a complete set of algorithms.
The engine build and configuration structure was changed to accomodate
providers, and adapt to the new style of openssl.cnf in version 3.0.
There is not a clean upgrade path for the /etc/ssl/openssl.cnf file,
installed by the openssl-conf package. It is recommended to rename or
remove the old config file when flashing an image with the updated
openssl-conf package, then apply the changes manually.
An old openssl.cnf file will silently work, but new engine or provider
packages will not be enabled. Any remaining engine config files under
/etc/ssl/engines.cnf.d can be removed.
On the build side, the include file used by engine packages was renamed
to openssl-module.mk, so the engine packages in other feeds need to
adapt.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2023-03-10 20:53:25 +00:00
|
|
|
$(CP) ./files/padlock.cnf $(1)/etc/ssl/modules.cnf.d/
|
2023-06-01 07:22:26 +00:00
|
|
|
echo -e "\nconfig engine 'padlock'\n\toption enabled '1'\n\toption builtin '1'" >> $(1)/etc/config/openssl)
|
2019-01-30 10:42:11 +00:00
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define Package/openssl-util/install
|
2006-11-23 00:29:07 +00:00
|
|
|
$(INSTALL_DIR) $(1)/usr/bin
|
2007-12-09 18:53:06 +00:00
|
|
|
$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/openssl $(1)/usr/bin/
|
2006-06-11 00:41:05 +00:00
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
$(eval $(call BuildPackage,libopenssl))
|
2019-01-30 10:42:11 +00:00
|
|
|
$(eval $(call BuildPackage,libopenssl-conf))
|
2018-10-24 14:25:00 +00:00
|
|
|
$(eval $(call BuildPackage,libopenssl-afalg))
|
2019-02-27 21:39:18 +00:00
|
|
|
$(eval $(call BuildPackage,libopenssl-devcrypto))
|
openssl: add legacy provider
This adapts the engine build infrastructure to allow building providers,
and packages the legacy provider. Providers are the successors of
engines, which have been deprecated.
The legacy provider supplies OpenSSL implementations of algorithms that
have been deemed legacy, including DES, IDEA, MDC2, SEED, and Whirlpool.
Even though these algorithms are implemented in a separate package,
their removal makes the regular library smaller by 3%, so the build
options will remain to allow lean custom builds. Their defaults will
change to 'y' if not bulding for a small flash, so that the regular
legacy package will contain a complete set of algorithms.
The engine build and configuration structure was changed to accomodate
providers, and adapt to the new style of openssl.cnf in version 3.0.
There is not a clean upgrade path for the /etc/ssl/openssl.cnf file,
installed by the openssl-conf package. It is recommended to rename or
remove the old config file when flashing an image with the updated
openssl-conf package, then apply the changes manually.
An old openssl.cnf file will silently work, but new engine or provider
packages will not be enabled. Any remaining engine config files under
/etc/ssl/engines.cnf.d can be removed.
On the build side, the include file used by engine packages was renamed
to openssl-module.mk, so the engine packages in other feeds need to
adapt.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2023-03-10 20:53:25 +00:00
|
|
|
$(eval $(call BuildPackage,libopenssl-legacy))
|
openssl: add configuration options, disable ssl3
Adds the following configuration options:
* using optimized assembler code (was always on before)
* use of x86 SSE2 instructions
* dyanic engine support
* include error messages
* Camellia, Gost, Idea, MDC2, Seed & Whirlpool algorithms
* RFC3779, CMS protocols
* VIA padlock hardware acceleration engine
Installs openssl.cnf with the library as it is used by engines
independent of the openssl util.
Fixes DTLS option that was innefective before.
Disables insecure SSL3 protocol and SHA0.
Adds openwrt-specific targets to Configure script, including asm support
for i386, ppc and mips64.
Strips building dirs from CFLAGS shown in binary.
Skips the fuzz directory during build.
Removed include/crypto/devcrypto.h that was included here, to use the
cryptodev-linux package, now that it was been moved from the packages
feed to the main openwrt repository.
This decreses the size of the ipk binray on MIPS32 by about 3.3%:
old:
706.957 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
199.294 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
new:
693.941 bin/packages/mips_24kc/base/libopenssl1.0.0_1.0.2q-2_mips_24kc.ipk
193.827 bin/packages/mips_24kc/base/openssl-util_1.0.2q-2_mips_24kc.ipk
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
2018-10-22 14:32:56 +00:00
|
|
|
$(eval $(call BuildPackage,libopenssl-padlock))
|
2006-06-11 00:41:05 +00:00
|
|
|
$(eval $(call BuildPackage,openssl-util))
|
