openwrt/package/boot/uboot-kirkwood/patches/701-phy-mv88e61xx-add-support-for-RGMII-TX-RX-delay.patch

49 lines
1.7 KiB
Diff
Raw Normal View History

From 940e9a5828480e4185c9a276ad7f35a4069a2393 Mon Sep 17 00:00:00 2001
From: Pawel Dembicki <paweldembicki@gmail.com>
Date: Thu, 23 Jan 2020 22:04:15 +0100
Subject: [PATCH 1/2] phy: mv88e61xx: add support for RGMII TX/RX delay
Clock delay in RGMII is required for some boards.
This patch introduce CONFIG_MV88E61XX_CPU_PORT_TX_DELAY and
CONFIG_MV88E61XX_CPU_PORT_RX_DELAY defines, which are setting
proper bits in PORT_REG_PHYS_CTRL register.
Cc: Chris Packham <judge.packham@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
---
drivers/net/phy/mv88e61xx.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
--- a/drivers/net/phy/mv88e61xx.c
+++ b/drivers/net/phy/mv88e61xx.c
@@ -94,6 +94,8 @@
#define PORT_REG_STATUS_CMODE_1000BASE_X 0x9
#define PORT_REG_STATUS_CMODE_SGMII 0xa
+#define PORT_REG_PHYS_CTRL_RGMII_RX_DELAY BIT(15)
+#define PORT_REG_PHYS_CTRL_RGMII_TX_DELAY BIT(14)
#define PORT_REG_PHYS_CTRL_PCS_AN_EN BIT(10)
#define PORT_REG_PHYS_CTRL_PCS_AN_RST BIT(9)
#define PORT_REG_PHYS_CTRL_FC_VALUE BIT(7)
@@ -747,9 +749,16 @@ static int mv88e61xx_fixed_port_setup(st
PORT_REG_PHYS_CTRL_SPD1000;
}
- if (port == CONFIG_MV88E61XX_CPU_PORT)
+ if (port == CONFIG_MV88E61XX_CPU_PORT) {
val |= PORT_REG_PHYS_CTRL_LINK_VALUE |
PORT_REG_PHYS_CTRL_LINK_FORCE;
+#if defined(CONFIG_MV88E61XX_CPU_PORT_RX_DELAY)
+ val |= PORT_REG_PHYS_CTRL_RGMII_RX_DELAY;
+#endif
+#if defined(CONFIG_MV88E61XX_CPU_PORT_TX_DELAY)
+ val |= PORT_REG_PHYS_CTRL_RGMII_TX_DELAY;
+#endif
+ }
return mv88e61xx_port_write(phydev, port, PORT_REG_PHYS_CTRL,
val);