openwrt/package/boot/uboot-layerscape/files/fsl_ls1088a-rdb-uEnv.txt

fdtaddr=0x8f000000
loadaddr=0x88000000
fdt_high=0xa0000000
initrd_high=0xffffffffffffffff
hwconfig=fsl_ddr:bank_intlv=auto
mc_init=sf probe 0:0;sf read 80000000 a00000 300000;sf read 80300000 e00000 100000;fsl_mc start mc 80000000 80300000;sf read 80400000 d00000 100000;fsl_mc apply dpl 80400000
qspi_boot=sf probe 0:0;sf read $fdtaddr f00000 100000;sf read $loadaddr 1000000 1000000;bootm $loadaddr - $fdtaddr
bootargs=root=/dev/mtdblock10 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=20c0000.spi-0:1m(bl2),4m(fip),1m(u-boot-env),4m(reserved-1),3m(mc),1m(dpl),1m(dpc),1m(dtb),16m(kernel),32m(rootfs),49m@0xf00000(firmware)
bootcmd=echo starting openwrt ...;run mc_init;run qspi_boot
bootdelay=3
fsl_bootcmd_mcinitcmd_set=y
layerscape: add u-boot environment support for OpenWrt boot This patch is to implement u-boot environment txt files to support OpenWrt boot for all layerscape devices. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> 2018-07-17 09:42:47 +00:00			`fdtaddr=0x8f000000`
package: layerscape: change loadaddr address At this moment loadaddr in most layerscape boards are configured to 0x81000000. 5.15 kernel on some boards is bigger than 5.10 and it cause error: Loading kernel from FIT Image at 81000000 ... Using 'config-1' configuration Trying 'kernel-1' kernel subimage Description: ARM64 OpenWrt Linux-5.15.112 Created: 2023-05-21 17:39:35 UTC Type: Kernel Image Compression: gzip compressed Data Start: 0x810000ec Data Size: 7513944 Bytes = 7.2 MiB Architecture: AArch64 OS: Linux Load Address: 0x80000000 Entry Point: 0x80000000 Hash algo: crc32 Hash value: 6fd69550 Hash algo: sha1 Hash value: ee34c753ffb615e199a428762824ad4a0aaef90a Verifying Hash Integrity ... crc32+ sha1+ OK Loading fdt from FIT Image at 81000000 ... Using 'config-1' configuration Trying 'fdt-1' fdt subimage Description: ARM64 OpenWrt fsl_ls1088a-rdb-sdboot device tree blob Created: 2023-05-21 17:39:35 UTC Type: Flat Device Tree Compression: uncompressed Data Start: 0x8172a98c Data Size: 19794 Bytes = 19.3 KiB Architecture: AArch64 Hash algo: crc32 Hash value: 59792ba3 Hash algo: sha1 Hash value: 135585a49f86cd85acea559b78b0098ae99d5e12 Verifying Hash Integrity ... crc32+ sha1+ OK Booting using the fdt blob at 0x8172a98c Uncompressing Kernel Image ERROR: new format image overwritten - must RESET the board to recover resetting ... This patch changes loadaddr to 0x88000000 (like LS1012A-FRDM board) to avoid overlapping for bigger images (like initramfs) too. Tested-by: Alexandra Alth <alexandra@alth.de> [LS1088ARDB] Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> 2023-04-18 09:37:04 +00:00			`loadaddr=0x88000000`
layerscape: add u-boot environment support for OpenWrt boot This patch is to implement u-boot environment txt files to support OpenWrt boot for all layerscape devices. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> 2018-07-17 09:42:47 +00:00			`fdt_high=0xa0000000`
			`initrd_high=0xffffffffffffffff`
			`hwconfig=fsl_ddr:bank_intlv=auto`
			`mc_init=sf probe 0:0;sf read 80000000 a00000 300000;sf read 80300000 e00000 100000;fsl_mc start mc 80000000 80300000;sf read 80400000 d00000 100000;fsl_mc apply dpl 80400000`
			`qspi_boot=sf probe 0:0;sf read $fdtaddr f00000 100000;sf read $loadaddr 1000000 1000000;bootm $loadaddr - $fdtaddr`
layerscape: add dtb to sysupgrade At this moment sysupgrade replaces only kernel and rootfs. This patch add dtb part to sysupgrade images to avoid situation when old dtb make system broken. Is possible to sysupgrade older images for NOR devices: 1. Firmware partition in bootargs need to be updated to: "49m@0xf00000(firmware)". Env should be saved after changes. 2. After step one, "sysupgrade -F" will work. Run tested: LS1046A-RDB Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [bump PKG_RELEASE for uboot-layerscape] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> 2020-08-19 10:13:26 +00:00			`bootargs=root=/dev/mtdblock10 rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 mtdparts=20c0000.spi-0:1m(bl2),4m(fip),1m(u-boot-env),4m(reserved-1),3m(mc),1m(dpl),1m(dpc),1m(dtb),16m(kernel),32m(rootfs),49m@0xf00000(firmware)`
layerscape: add u-boot environment support for OpenWrt boot This patch is to implement u-boot environment txt files to support OpenWrt boot for all layerscape devices. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> 2018-07-17 09:42:47 +00:00			`bootcmd=echo starting openwrt ...;run mc_init;run qspi_boot`
			`bootdelay=3`
uboot-layerscape: bump to LSDK-21.08 Update layerscape u-boot package to LSDK-21.08 and drop patches which are no longer needed. The new env variable 'fsl_bootcmd_mcinitcmd_set' is needed to protect the configured bootcmd and mc_init values. See [1] for more informations. [1] https://source.denx.de/u-boot/u-boot/-/commit/b62c174e861bddc3c7131045ed018556645cecb9 Signed-off-by: Martin Schiller <ms@dev.tdt.de> 2021-10-07 06:56:19 +00:00			`fsl_bootcmd_mcinitcmd_set=y`