openwrt/target/linux/bcm53xx/base-files/etc/init.d/fastnetwork

45 lines
1.2 KiB
Plaintext
Raw Normal View History

bcm53xx: enable & setup packet steering Packet steering can improve NAT masquarade performance on Northstar by 40-50%. It makes reaching 940-942 Mb/s possible on BCM4708 (and obviously BCM47094 too). Add scripts setting up the most optimal Northstar setup. Below are testing results for running iperf TCP traffic from LAN to WAN. They were used to pick up golden values. ┌──────────┬──────────┬────────────────────┬────────────────────┐ │ eth0 │ br-lan │ flow_offloading=0 │ flow_offloading=1 │ │ │ ├─────────┬──────────┼─────────┬──────────┤ │ rps_cpus │ rps_cpus │ BCM4708 │ BCM47094 │ BCM4708 │ BCM47094 │ ├──────────┼──────────┼─────────┼──────────┼─────────┼──────────┤ │ 0 │ 0 │ 387 │ 671 │ 707 │ 941 │ │ 0 │ 1 │ 343 │ 576 │ 705 │ 941 │ │ 0 │ 2 │ ✓ 574 │ ✓ 941 │ 704 │ 940 │ │ 1 │ 0 │ 320 │ 549 │ 561 │ 941 │ │ 1 │ 1 │ 327 │ 551 │ 553 │ 941 │ │ 1 │ 2 │ 523 │ ✓ 940 │ 559 │ 940 │ │ 2 │ 0 │ 383 │ 652 │ ✓ 940 │ 941 │ │ 2 │ 1 │ 448 │ 754 │ ✓ 942 │ 941 │ │ 2 │ 2 │ 404 │ 655 │ ✓ 941 │ 941 │ └──────────┴──────────┴─────────┴──────────┴─────────┴──────────┘ Above tests were performed with all eth0 interrupts handled by CPU0. Setting "echo 2 > /proc/irq/38/smp_affinity" was tested on BCM4708 but it didn't increased speeds (just required different steering): ┌──────────┬──────────┬───────────┐ │ eth0 │ br-lan │ flow_offl │ │ rx-0 │ rx-0 │ oading=0 │ │ rps_cpus │ rps_cpus │ BCM4708 │ ├──────────┼──────────┼───────────┤ │ 0 │ 0 │ 384 │ │ 0 │ 1 │ ✓ 574 │ │ 0 │ 2 │ 348 │ │ 1 │ 0 │ 383 │ │ 1 │ 1 │ 412 │ │ 1 │ 2 │ 448 │ │ 2 │ 0 │ 321 │ │ 2 │ 1 │ 520 │ │ 2 │ 2 │ 327 │ └──────────┴──────────┴───────────┘ Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit fcbd39689ebfef20c62fe3882d51f3af765e8028)
2022-06-10 08:51:23 +00:00
#!/bin/sh /etc/rc.common
START=25
USE_PROCD=1
start_service() {
reload_service
}
service_triggers() {
procd_add_reload_trigger "network"
procd_add_reload_trigger "firewall"
procd_add_reload_interface_trigger "lan"
}
reload_service() {
local packet_steering="$(uci -q get network.@globals[0].packet_steering)"
local num_cpus="$(grep -c "^processor.*:" /proc/cpuinfo)"
local flow_offloading="$(uci -q get firewall.@defaults[0].flow_offloading)"
local flow_offloading_hw="$(uci -q get firewall.@defaults[0].flow_offloading_hw)"
# Any steering on 1 CPU (BCM47081) worsens network performance
[ "$num_cpus" != 2 ] && return
[ "$packet_steering" != 1 ] && {
echo 0 > /sys/class/net/br-lan/queues/rx-0/rps_cpus
echo 0 > /sys/class/net/eth0/queues/rx-0/rps_cpus
return
}
if [ ${flow_offloading_hw:-0} -gt 0 ]; then
# HW offloading
echo 0 > /sys/class/net/br-lan/queues/rx-0/rps_cpus
echo 0 > /sys/class/net/eth0/queues/rx-0/rps_cpus
elif [ ${flow_offloading:-0} -gt 0 ]; then
# SW offloading
# br-lan setup doesn't seem to matter for offloading case
echo 2 > /sys/class/net/eth0/queues/rx-0/rps_cpus
else
# Default
echo 2 > /sys/class/net/br-lan/queues/rx-0/rps_cpus
echo 0 > /sys/class/net/eth0/queues/rx-0/rps_cpus
fi
}