2018-08-15 08:41:41 +00:00
|
|
|
#
|
|
|
|
|
# Copyright 2018 NXP
|
|
|
|
|
#
|
|
|
|
|
# This is free software, licensed under the GNU General Public License v2.
|
|
|
|
|
# See /LICENSE for more information.
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
define Device/Default
|
|
|
|
|
PROFILES := Default
|
|
|
|
|
IMAGES := firmware.bin
|
|
|
|
|
FILESYSTEMS := ubifs
|
2018-11-20 09:54:49 +00:00
|
|
|
MKUBIFS_OPTS := -m 1 -e 262016 -c 128
|
2018-08-15 08:41:41 +00:00
|
|
|
KERNEL := kernel-bin | gzip | uImage gzip
|
|
|
|
|
KERNEL_LOADADDR := 0x80080000
|
|
|
|
|
KERNEL_ENTRY_POINT := 0x80080000
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define Device/ls1012ardb
|
|
|
|
|
DEVICE_TITLE := LS1012ARDB
|
|
|
|
|
DEVICE_PACKAGES += \
|
|
|
|
|
layerscape-ppfe \
|
2019-05-06 03:26:09 +00:00
|
|
|
tfa-ls1012ardb \
|
2018-08-15 08:41:41 +00:00
|
|
|
kmod-ppfe
|
|
|
|
|
DEVICE_DTS := freescale/fsl-ls1012a-rdb
|
|
|
|
|
UBINIZE_OPTS := -E 5
|
|
|
|
|
BLOCKSIZE := 256KiB
|
|
|
|
|
PAGESIZE := 1
|
|
|
|
|
IMAGE/firmware.bin := \
|
|
|
|
|
ls-clean | \
|
2019-05-06 03:26:09 +00:00
|
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
|
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
|
|
|
ls-append $(1)-uboot-env.bin | pad-to 10M | \
|
2018-08-15 08:41:41 +00:00
|
|
|
ls-append pfe.itb | pad-to 15M | \
|
|
|
|
|
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
|
|
|
|
append-kernel | pad-to 32M | \
|
|
|
|
|
append-ubi | check-size 67108865
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += ls1012ardb
|
|
|
|
|
|
layerscape: add ls1012afrwy support and drop ls1012afrdm
ls1012afrdm was no longer supported in NXP Layerscape SDK.
Instead a new board ls1012afrwy was introduced in LSDK.
This patch is to drop ls1012afrdm and add ls1012afrwy support.
Since only 2MB NOR flash could be used, we just put u-boot
and firmware on NOR flash, and put kernel/dtb/rootfs on SD
card.
The Layerscape FRWY-LS1012A board is an ultra-low-cost
development platform for LS1012A Series Communication
Processors built on Arm Cortex-A53. This tool refines the
FRDM-LS1012A with more features for a better hands-on experience
for IoT, edge computing, and various advanced embedded
applications. Features include easy access to processor I/O,
low-power operation, micro SD card storage, an M2 connector, a
small form factor, and expansion board options via mikroBUS Click
Module. The MicroBUS Module provides easy expansion via hundreds
of powerful modules supporting sensors, actuators, memories,
and displays.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-18 08:56:07 +00:00
|
|
|
define Device/ls1012afrwy
|
|
|
|
|
DEVICE_TITLE := LS1012AFRWY
|
2018-08-15 08:41:41 +00:00
|
|
|
DEVICE_PACKAGES += \
|
|
|
|
|
layerscape-ppfe \
|
2019-05-06 03:26:09 +00:00
|
|
|
tfa-ls1012afrwy \
|
2018-08-15 08:41:41 +00:00
|
|
|
kmod-ppfe
|
layerscape: add ls1012afrwy support and drop ls1012afrdm
ls1012afrdm was no longer supported in NXP Layerscape SDK.
Instead a new board ls1012afrwy was introduced in LSDK.
This patch is to drop ls1012afrdm and add ls1012afrwy support.
Since only 2MB NOR flash could be used, we just put u-boot
and firmware on NOR flash, and put kernel/dtb/rootfs on SD
card.
The Layerscape FRWY-LS1012A board is an ultra-low-cost
development platform for LS1012A Series Communication
Processors built on Arm Cortex-A53. This tool refines the
FRDM-LS1012A with more features for a better hands-on experience
for IoT, edge computing, and various advanced embedded
applications. Features include easy access to processor I/O,
low-power operation, micro SD card storage, an M2 connector, a
small form factor, and expansion board options via mikroBUS Click
Module. The MicroBUS Module provides easy expansion via hundreds
of powerful modules supporting sensors, actuators, memories,
and displays.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-18 08:56:07 +00:00
|
|
|
DEVICE_DTS := freescale/fsl-ls1012a-frwy
|
|
|
|
|
FILESYSTEMS := ext4
|
|
|
|
|
IMAGES := firmware.bin sdcard.img
|
2018-08-15 08:41:41 +00:00
|
|
|
IMAGE/firmware.bin := \
|
|
|
|
|
ls-clean | \
|
2019-05-06 03:26:09 +00:00
|
|
|
ls-append $(1)-bl2.pbl | pad-to 128K | \
|
layerscape: add ls1012afrwy support and drop ls1012afrdm
ls1012afrdm was no longer supported in NXP Layerscape SDK.
Instead a new board ls1012afrwy was introduced in LSDK.
This patch is to drop ls1012afrdm and add ls1012afrwy support.
Since only 2MB NOR flash could be used, we just put u-boot
and firmware on NOR flash, and put kernel/dtb/rootfs on SD
card.
The Layerscape FRWY-LS1012A board is an ultra-low-cost
development platform for LS1012A Series Communication
Processors built on Arm Cortex-A53. This tool refines the
FRDM-LS1012A with more features for a better hands-on experience
for IoT, edge computing, and various advanced embedded
applications. Features include easy access to processor I/O,
low-power operation, micro SD card storage, an M2 connector, a
small form factor, and expansion board options via mikroBUS Click
Module. The MicroBUS Module provides easy expansion via hundreds
of powerful modules supporting sensors, actuators, memories,
and displays.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-18 08:56:07 +00:00
|
|
|
ls-append pfe.itb | pad-to 384K | \
|
2019-05-06 03:26:09 +00:00
|
|
|
ls-append $(1)-fip.bin | pad-to 1856K | \
|
layerscape: add ls1012afrwy support and drop ls1012afrdm
ls1012afrdm was no longer supported in NXP Layerscape SDK.
Instead a new board ls1012afrwy was introduced in LSDK.
This patch is to drop ls1012afrdm and add ls1012afrwy support.
Since only 2MB NOR flash could be used, we just put u-boot
and firmware on NOR flash, and put kernel/dtb/rootfs on SD
card.
The Layerscape FRWY-LS1012A board is an ultra-low-cost
development platform for LS1012A Series Communication
Processors built on Arm Cortex-A53. This tool refines the
FRDM-LS1012A with more features for a better hands-on experience
for IoT, edge computing, and various advanced embedded
applications. Features include easy access to processor I/O,
low-power operation, micro SD card storage, an M2 connector, a
small form factor, and expansion board options via mikroBUS Click
Module. The MicroBUS Module provides easy expansion via hundreds
of powerful modules supporting sensors, actuators, memories,
and displays.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-18 08:56:07 +00:00
|
|
|
ls-append $(1)-uboot-env.bin | pad-to 2048K | \
|
|
|
|
|
check-size 2097153
|
|
|
|
|
IMAGE/sdcard.img := \
|
|
|
|
|
ls-clean | \
|
|
|
|
|
ls-append-sdhead $(1) | pad-to 15M | \
|
2018-08-15 08:41:41 +00:00
|
|
|
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
layerscape: add ls1012afrwy support and drop ls1012afrdm
ls1012afrdm was no longer supported in NXP Layerscape SDK.
Instead a new board ls1012afrwy was introduced in LSDK.
This patch is to drop ls1012afrdm and add ls1012afrwy support.
Since only 2MB NOR flash could be used, we just put u-boot
and firmware on NOR flash, and put kernel/dtb/rootfs on SD
card.
The Layerscape FRWY-LS1012A board is an ultra-low-cost
development platform for LS1012A Series Communication
Processors built on Arm Cortex-A53. This tool refines the
FRDM-LS1012A with more features for a better hands-on experience
for IoT, edge computing, and various advanced embedded
applications. Features include easy access to processor I/O,
low-power operation, micro SD card storage, an M2 connector, a
small form factor, and expansion board options via mikroBUS Click
Module. The MicroBUS Module provides easy expansion via hundreds
of powerful modules supporting sensors, actuators, memories,
and displays.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-18 08:56:07 +00:00
|
|
|
append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
|
|
|
|
|
append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
|
2018-08-15 08:41:41 +00:00
|
|
|
endef
|
layerscape: add ls1012afrwy support and drop ls1012afrdm
ls1012afrdm was no longer supported in NXP Layerscape SDK.
Instead a new board ls1012afrwy was introduced in LSDK.
This patch is to drop ls1012afrdm and add ls1012afrwy support.
Since only 2MB NOR flash could be used, we just put u-boot
and firmware on NOR flash, and put kernel/dtb/rootfs on SD
card.
The Layerscape FRWY-LS1012A board is an ultra-low-cost
development platform for LS1012A Series Communication
Processors built on Arm Cortex-A53. This tool refines the
FRDM-LS1012A with more features for a better hands-on experience
for IoT, edge computing, and various advanced embedded
applications. Features include easy access to processor I/O,
low-power operation, micro SD card storage, an M2 connector, a
small form factor, and expansion board options via mikroBUS Click
Module. The MicroBUS Module provides easy expansion via hundreds
of powerful modules supporting sensors, actuators, memories,
and displays.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-18 08:56:07 +00:00
|
|
|
TARGET_DEVICES += ls1012afrwy
|
2018-08-15 08:41:41 +00:00
|
|
|
|
|
|
|
|
define Device/ls1043ardb
|
|
|
|
|
DEVICE_TITLE := LS1043ARDB
|
|
|
|
|
DEVICE_PACKAGES += \
|
|
|
|
|
layerscape-fman-ls1043ardb \
|
2019-05-06 03:26:09 +00:00
|
|
|
tfa-ls1043ardb \
|
|
|
|
|
fmc fmc-eth-config
|
2018-08-15 08:41:41 +00:00
|
|
|
DEVICE_DTS := freescale/fsl-ls1043a-rdb-sdk
|
|
|
|
|
FILESYSTEMS := squashfs
|
|
|
|
|
IMAGE/firmware.bin := \
|
|
|
|
|
ls-clean | \
|
2019-05-06 03:26:09 +00:00
|
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
|
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
|
|
|
ls-append $(1)-uboot-env.bin | pad-to 9M | \
|
2018-08-15 08:41:41 +00:00
|
|
|
ls-append $(1)-fman.bin | pad-to 15M | \
|
|
|
|
|
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
|
|
|
|
append-kernel | pad-to 32M | \
|
|
|
|
|
append-rootfs | pad-rootfs | check-size 67108865
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += ls1043ardb
|
|
|
|
|
|
2018-07-18 06:14:40 +00:00
|
|
|
define Device/ls1043ardb-sdboot
|
|
|
|
|
DEVICE_TITLE := LS1043ARDB (SD Card Boot)
|
|
|
|
|
DEVICE_PACKAGES += \
|
|
|
|
|
layerscape-fman-ls1043ardb \
|
2019-05-06 03:26:09 +00:00
|
|
|
tfa-ls1043ardb-sdboot \
|
|
|
|
|
fmc fmc-eth-config
|
2018-07-18 06:14:40 +00:00
|
|
|
DEVICE_DTS := freescale/fsl-ls1043a-rdb-sdk
|
|
|
|
|
FILESYSTEMS := ext4
|
|
|
|
|
IMAGES := sdcard.img
|
|
|
|
|
IMAGE/sdcard.img := \
|
|
|
|
|
ls-clean | \
|
|
|
|
|
ls-append-sdhead $(1) | pad-to 4K | \
|
2019-05-06 03:26:09 +00:00
|
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
|
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
|
|
|
ls-append $(1)-uboot-env.bin | pad-to 9M | \
|
2018-07-18 06:14:40 +00:00
|
|
|
ls-append ls1043ardb-fman.bin | pad-to 15M | \
|
|
|
|
|
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
|
|
|
|
append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
|
|
|
|
|
append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += ls1043ardb-sdboot
|
|
|
|
|
|
2018-08-15 08:41:41 +00:00
|
|
|
define Device/ls1046ardb
|
|
|
|
|
DEVICE_TITLE := LS1046ARDB
|
|
|
|
|
DEVICE_PACKAGES += \
|
|
|
|
|
layerscape-fman-ls1046ardb \
|
2019-05-06 03:26:09 +00:00
|
|
|
tfa-ls1046ardb \
|
|
|
|
|
fmc fmc-eth-config
|
2018-08-15 08:41:41 +00:00
|
|
|
DEVICE_DTS := freescale/fsl-ls1046a-rdb-sdk
|
|
|
|
|
UBINIZE_OPTS := -E 5
|
|
|
|
|
BLOCKSIZE := 256KiB
|
|
|
|
|
PAGESIZE := 1
|
|
|
|
|
IMAGE/firmware.bin := \
|
|
|
|
|
ls-clean | \
|
2019-05-06 03:26:09 +00:00
|
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
|
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
|
|
|
ls-append $(1)-uboot-env.bin | pad-to 9M | \
|
2018-08-15 08:41:41 +00:00
|
|
|
ls-append $(1)-fman.bin | pad-to 15M | \
|
|
|
|
|
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
|
|
|
|
append-kernel | pad-to 32M | \
|
|
|
|
|
append-ubi | check-size 67108865
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += ls1046ardb
|
|
|
|
|
|
2018-07-18 06:14:40 +00:00
|
|
|
define Device/ls1046ardb-sdboot
|
|
|
|
|
DEVICE_TITLE := LS1046ARDB (SD Card Boot)
|
|
|
|
|
DEVICE_PACKAGES += \
|
|
|
|
|
layerscape-fman-ls1046ardb \
|
2019-05-06 03:26:09 +00:00
|
|
|
tfa-ls1046ardb-sdboot \
|
|
|
|
|
fmc fmc-eth-config
|
2018-07-18 06:14:40 +00:00
|
|
|
DEVICE_DTS := freescale/fsl-ls1046a-rdb-sdk
|
|
|
|
|
FILESYSTEMS := ext4
|
|
|
|
|
IMAGES := sdcard.img
|
|
|
|
|
IMAGE/sdcard.img := \
|
|
|
|
|
ls-clean | \
|
|
|
|
|
ls-append-sdhead $(1) | pad-to 4K | \
|
2019-05-06 03:26:09 +00:00
|
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
|
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
|
|
|
ls-append $(1)-uboot-env.bin | pad-to 9M | \
|
2018-07-18 06:14:40 +00:00
|
|
|
ls-append ls1046ardb-fman.bin | pad-to 15M | \
|
|
|
|
|
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
|
|
|
|
append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
|
|
|
|
|
append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += ls1046ardb-sdboot
|
|
|
|
|
|
2018-08-15 08:41:41 +00:00
|
|
|
define Device/ls1088ardb
|
|
|
|
|
DEVICE_TITLE := LS1088ARDB
|
|
|
|
|
DEVICE_PACKAGES += \
|
|
|
|
|
layerscape-mc-ls1088ardb \
|
|
|
|
|
layerscape-dpl-ls1088ardb \
|
2019-05-06 03:26:09 +00:00
|
|
|
tfa-ls1088ardb \
|
2018-08-15 08:41:41 +00:00
|
|
|
restool
|
|
|
|
|
DEVICE_DTS := freescale/fsl-ls1088a-rdb
|
|
|
|
|
UBINIZE_OPTS := -E 5
|
|
|
|
|
BLOCKSIZE := 256KiB
|
|
|
|
|
PAGESIZE := 1
|
|
|
|
|
IMAGE/firmware.bin := \
|
|
|
|
|
ls-clean | \
|
2019-05-06 03:26:09 +00:00
|
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
|
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
|
|
|
ls-append $(1)-uboot-env.bin | pad-to 10M | \
|
2018-08-15 08:41:41 +00:00
|
|
|
ls-append $(1)-mc.itb | pad-to 13M | \
|
|
|
|
|
ls-append $(1)-dpl.dtb | pad-to 14M | \
|
|
|
|
|
ls-append $(1)-dpc.dtb | pad-to 15M | \
|
|
|
|
|
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
|
|
|
|
append-kernel | pad-to 32M | \
|
|
|
|
|
append-ubi | check-size 67108865
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += ls1088ardb
|
|
|
|
|
|
2018-07-18 06:14:40 +00:00
|
|
|
define Device/ls1088ardb-sdboot
|
|
|
|
|
DEVICE_TITLE := LS1088ARDB (SD Card Boot)
|
|
|
|
|
DEVICE_PACKAGES += \
|
|
|
|
|
layerscape-mc-ls1088ardb \
|
|
|
|
|
layerscape-dpl-ls1088ardb \
|
2019-05-06 03:26:09 +00:00
|
|
|
tfa-ls1088ardb-sdboot \
|
2018-07-18 06:14:40 +00:00
|
|
|
restool
|
|
|
|
|
DEVICE_DTS := freescale/fsl-ls1088a-rdb
|
|
|
|
|
FILESYSTEMS := ext4
|
|
|
|
|
IMAGES := sdcard.img
|
|
|
|
|
IMAGE/sdcard.img := \
|
|
|
|
|
ls-clean | \
|
|
|
|
|
ls-append-sdhead $(1) | pad-to 4K | \
|
2019-05-06 03:26:09 +00:00
|
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
|
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
|
|
|
ls-append $(1)-uboot-env.bin | pad-to 10M | \
|
2018-07-18 06:14:40 +00:00
|
|
|
ls-append ls1088ardb-mc.itb | pad-to 13M | \
|
|
|
|
|
ls-append ls1088ardb-dpl.dtb | pad-to 14M | \
|
|
|
|
|
ls-append ls1088ardb-dpc.dtb | pad-to 15M | \
|
|
|
|
|
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
|
|
|
|
append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
|
|
|
|
|
append-rootfs | check-size $(LS_SD_IMAGE_SIZE)
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += ls1088ardb-sdboot
|
|
|
|
|
|
2018-08-15 08:41:41 +00:00
|
|
|
define Device/ls2088ardb
|
|
|
|
|
DEVICE_TITLE := LS2088ARDB
|
|
|
|
|
DEVICE_PACKAGES += \
|
|
|
|
|
layerscape-mc-ls2088ardb \
|
|
|
|
|
layerscape-dpl-ls2088ardb \
|
2019-05-06 03:26:09 +00:00
|
|
|
tfa-ls2088ardb \
|
2018-08-15 08:41:41 +00:00
|
|
|
restool
|
|
|
|
|
DEVICE_DTS := freescale/fsl-ls2088a-rdb
|
|
|
|
|
FILESYSTEMS := squashfs
|
|
|
|
|
IMAGE/firmware.bin := \
|
|
|
|
|
ls-clean | \
|
2019-05-06 03:26:09 +00:00
|
|
|
ls-append $(1)-bl2.pbl | pad-to 1M | \
|
|
|
|
|
ls-append $(1)-fip.bin | pad-to 5M | \
|
|
|
|
|
ls-append $(1)-uboot-env.bin | pad-to 10M | \
|
2018-08-15 08:41:41 +00:00
|
|
|
ls-append $(1)-mc.itb | pad-to 13M | \
|
|
|
|
|
ls-append $(1)-dpl.dtb | pad-to 14M | \
|
|
|
|
|
ls-append $(1)-dpc.dtb | pad-to 15M | \
|
|
|
|
|
ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
|
|
|
|
|
append-kernel | pad-to 32M | \
|
|
|
|
|
append-rootfs | pad-rootfs | check-size 67108865
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += ls2088ardb
|
|
|
|
|
|
2019-02-26 06:47:42 +00:00
|
|
|
define Device/traverse-ls1043
|
2018-08-15 08:41:41 +00:00
|
|
|
KERNEL_NAME := Image
|
|
|
|
|
KERNEL_SUFFIX := -kernel.itb
|
|
|
|
|
KERNEL_INSTALL := 1
|
|
|
|
|
FDT_LOADADDR = 0x90000000
|
|
|
|
|
FILESYSTEMS := ubifs
|
2019-02-26 06:47:42 +00:00
|
|
|
DEVICE_TITLE := Traverse LS1043 Boards
|
2018-08-15 08:41:41 +00:00
|
|
|
DEVICE_PACKAGES += \
|
|
|
|
|
layerscape-fman-ls1043ardb \
|
2019-02-26 06:47:42 +00:00
|
|
|
uboot-envtools \
|
2018-08-15 08:41:41 +00:00
|
|
|
kmod-i2c-core kmod-i2c-mux-pca954x \
|
2019-02-26 06:47:42 +00:00
|
|
|
kmod-hwmon-core \
|
2018-08-15 08:41:41 +00:00
|
|
|
kmod-gpio-pca953x kmod-input-gpio-keys-polled \
|
|
|
|
|
kmod-rtc-isl1208
|
|
|
|
|
DEVICE_DESCRIPTION = \
|
|
|
|
|
Build images for Traverse LS1043 boards. This generates a single image \
|
|
|
|
|
capable of booting on any of the boards in this family.
|
|
|
|
|
DEVICE_DTS = freescale/traverse-ls1043s
|
|
|
|
|
DEVICE_DTS_DIR = $(LINUX_DIR)/arch/arm64/boot/dts
|
|
|
|
|
DEVICE_DTS_CONFIG = ls1043s
|
|
|
|
|
KERNEL := kernel-bin | gzip | traverse-fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb $$(FDT_LOADADDR)
|
|
|
|
|
KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb $$(FDT_LOADADDR)
|
2019-02-26 06:47:42 +00:00
|
|
|
IMAGES = root sysupgrade.bin
|
2018-08-15 08:41:41 +00:00
|
|
|
IMAGE/root = append-rootfs
|
2019-02-26 06:47:42 +00:00
|
|
|
IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
|
2018-11-20 09:54:49 +00:00
|
|
|
MKUBIFS_OPTS := -m 2048 -e 124KiB -c 4096
|
2018-08-15 08:41:41 +00:00
|
|
|
endef
|
2019-02-26 06:47:42 +00:00
|
|
|
TARGET_DEVICES += traverse-ls1043
|
