mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 07:22:33 +00:00
76 lines
2.5 KiB
Diff
76 lines
2.5 KiB
Diff
|
From ea59741f2679e30d765b6a9e0d45265e3033a38c Mon Sep 17 00:00:00 2001
|
||
|
|
From: Dave Stevenson <dave.stevenson@raspberrypi.org>
|
||
|
|
Date: Tue, 18 Sep 2018 10:47:38 +0100
|
||
|
|
Subject: [PATCH 418/454] dtoverlays: Correct DT handling camera GPIOs
|
||
|
|
|
||
|
|
The firmware has support for updating overrides with the correct
|
||
|
|
GPIO settings for the camera GPIOs, but the wrong device tree
|
||
|
|
setup ended up being merged.
|
||
|
|
Correct the DT configuration so that the firmware does set it
|
||
|
|
up correctly.
|
||
|
|
|
||
|
|
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
|
||
|
|
---
|
||
|
|
arch/arm/boot/dts/bcm270x.dtsi | 7 +++++++
|
||
|
|
arch/arm/boot/dts/overlays/README | 10 +---------
|
||
|
|
arch/arm/boot/dts/overlays/ov5647-overlay.dts | 12 ++++++++++--
|
||
|
|
3 files changed, 18 insertions(+), 11 deletions(-)
|
||
|
|
|
||
|
|
--- a/arch/arm/boot/dts/bcm270x.dtsi
|
||
|
|
+++ b/arch/arm/boot/dts/bcm270x.dtsi
|
||
|
|
@@ -152,6 +152,13 @@
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
+
|
||
|
|
+ __overrides__ {
|
||
|
|
+ cam0-pwdn-ctrl;
|
||
|
|
+ cam0-pwdn;
|
||
|
|
+ cam0-led-ctrl;
|
||
|
|
+ cam0-led;
|
||
|
|
+ };
|
||
|
|
};
|
||
|
|
|
||
|
|
/* Configure and use the auxilliary interrupt controller */
|
||
|
|
--- a/arch/arm/boot/dts/overlays/README
|
||
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
||
|
|
@@ -1283,15 +1283,7 @@ Info: Omnivision OV5647 camera module.
|
||
|
|
Uses Unicam 1, which is the standard camera connector on most Pi
|
||
|
|
variants.
|
||
|
|
Load: dtoverlay=ov5647,<param>=<val>
|
||
|
|
-Params: cam0-pwdn GPIO used to control the sensor powerdown line.
|
||
|
|
-
|
||
|
|
- cam0-led GPIO used to control the sensor led
|
||
|
|
- Both these fields should be automatically filled
|
||
|
|
- in by the firmware to reflect the default GPIO
|
||
|
|
- configuration of the particular Pi variant in
|
||
|
|
- use.
|
||
|
|
-
|
||
|
|
- i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45.
|
||
|
|
+Params: i2c_pins_28_29 Use pins 28&29 for the I2C instead of 44&45.
|
||
|
|
This is required for Pi B+, 2, 0, and 0W.
|
||
|
|
|
||
|
|
|
||
|
|
--- a/arch/arm/boot/dts/overlays/ov5647-overlay.dts
|
||
|
|
+++ b/arch/arm/boot/dts/overlays/ov5647-overlay.dts
|
||
|
|
@@ -78,9 +78,17 @@
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
+ fragment@5 {
|
||
|
|
+ target-path="/__overrides__";
|
||
|
|
+ __overlay__ {
|
||
|
|
+ cam0-pwdn-ctrl = <&ov5647>,"pwdn-gpios:0";
|
||
|
|
+ cam0-pwdn = <&ov5647>,"pwdn-gpios:4";
|
||
|
|
+ cam0-led-ctrl = <&ov5647>,"pwdn-gpios:12";
|
||
|
|
+ cam0-led = <&ov5647>,"pwdn-gpios:16";
|
||
|
|
+ };
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
__overrides__ {
|
||
|
|
i2c_pins_28_29 = <0>,"+4-5";
|
||
|
|
- cam0-pwdn = <&ov5647>,"pwdn-gpios:4";
|
||
|
|
- cam0-led = <&ov5647>,"pwdn-gpios:16";
|
||
|
|
};
|
||
|
|
};
|