openwrt/target/linux/bcm27xx/patches-6.1/950-0650-media-dt-bindings-media-i2c-Add-mono-version-to-IMX2.patch

From 695dadec7459162f4945320081c9c4d2712406a4 Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Thu, 16 Feb 2023 00:29:49 +0200
Subject: [PATCH] media: dt-bindings: media: i2c: Add mono version to
 IMX290 bindings

Should be upstream commit f0c720ff2d21

The IMX290 module is available as either monochrome or colour and
the variant is not detectable at runtime.

Add a new compatible string for the monochrome version, based on the
full device name IMX290LLR. For consistency, add a new compatible string
for the colour version based on the IMX290LQR full device name, and
deprecate the current ambiguous compatible string.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
 .../bindings/media/i2c/sony,imx290.yaml       | 24 +++++++++++++------
 1 file changed, 17 insertions(+), 7 deletions(-)

--- a/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml
@@ -12,15 +12,25 @@ maintainers:
 
 description: |-
   The Sony IMX290 is a 1/2.8-Inch CMOS Solid-state image sensor with Square
-  Pixel for Color Cameras. It is programmable through I2C and 4-wire
-  interfaces. The sensor output is available via CMOS logic parallel SDR
-  output, Low voltage LVDS DDR output and CSI-2 serial data output. The CSI-2
-  bus is the default. No bindings have been defined for the other busses.
+  Pixel, available in either mono or colour variants. It is programmable
+  through I2C and 4-wire interfaces.
+
+  The sensor output is available via CMOS logic parallel SDR output, Low voltage
+  LVDS DDR output and CSI-2 serial data output. The CSI-2 bus is the default.
+  No bindings have been defined for the other busses.
+
+  imx290lqr is the full model identifier for the colour variant. "sony,imx290"
+  is treated the same as this as it was the original compatible string.
+  imx290llr is the mono version of the sensor.
 
 properties:
   compatible:
-    enum:
-      - sony,imx290
+    oneOf:
+      - enum:
+          - sony,imx290lqr # Colour
+          - sony,imx290llr # Monochrome
+      - const: sony,imx290
+        deprecated: true
 
   reg:
     maxItems: 1
@@ -101,7 +111,7 @@ examples:
         #size-cells = <0>;
 
         imx290: camera-sensor@1a {
-            compatible = "sony,imx290";
+            compatible = "sony,imx290lqr";
             reg = <0x1a>;
 
             pinctrl-names = "default";