openwrt/target/linux/bcm27xx/patches-6.6/950-1166-dmaengine-dw-axi-dmac-Honour-snps-block-size.patch

From 475cddaba6b02584157e1c128a5a6858770a3d06 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.com>
Date: Wed, 10 Jul 2024 14:47:17 +0100
Subject: [PATCH 1166/1215] dmaengine: dw-axi-dmac: Honour snps,block-size

The snps,block-size DT property declares the maximum block size for each
channel of the dw-axi-dmac. However, the driver ignores these when
setting max_seg_size and uses MAX_BLOCK_SIZE (4096) instead.

To take advantage of the efficiencies of larger blocks, calculate the
minimum block size across all channels and use that instead.

See: https://github.com/raspberrypi/linux/issues/6256

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
 drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -1470,6 +1470,7 @@ static int dw_probe(struct platform_devi
 	struct dw_axi_dma *dw;
 	struct dw_axi_dma_hcfg *hdata;
 	struct reset_control *resets;
+	unsigned int max_seg_size;
 	unsigned int flags;
 	u32 i;
 	int ret;
@@ -1585,9 +1586,21 @@ static int dw_probe(struct platform_devi
 	 * Synopsis DesignWare AxiDMA datasheet mentioned Maximum
 	 * supported blocks is 1024. Device register width is 4 bytes.
 	 * Therefore, set constraint to 1024 * 4.
+	 * However, if all channels specify a greater value, use that instead.
 	 */
+
 	dw->dma.dev->dma_parms = &dw->dma_parms;
-	dma_set_max_seg_size(&pdev->dev, MAX_BLOCK_SIZE);
+	max_seg_size = UINT_MAX;
+	for (i = 0; i < dw->hdata->nr_channels; i++) {
+		unsigned int block_size = chip->dw->hdata->block_size[i];
+
+		if (!block_size)
+			block_size = MAX_BLOCK_SIZE;
+		max_seg_size = min(block_size, max_seg_size);
+	}
+
+	dma_set_max_seg_size(&pdev->dev, max_seg_size);
+
 	platform_set_drvdata(pdev, chip);
 
 	pm_runtime_enable(chip->dev);