openwrt/target/linux/brcm2708/patches-4.14/950-0307-Enable-AES-AES-bit-slice-and-AES-NEON-engines-on-arm.patch

From d6e7ba1d656451d196d3175780e819abad063edf Mon Sep 17 00:00:00 2001
From: eccgecko <36884529+eccgecko@users.noreply.github.com>
Date: Wed, 23 May 2018 19:22:33 +0200
Subject: [PATCH 307/454] Enable AES, AES bit slice, and AES NEON engines on
 arm64

---
 arch/arm64/configs/bcmrpi3_defconfig | 3 +++
 1 file changed, 3 insertions(+)

--- a/arch/arm64/configs/bcmrpi3_defconfig
+++ b/arch/arm64/configs/bcmrpi3_defconfig
@@ -1274,5 +1274,8 @@ CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_LZ4=m
 CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_ARM64_CRYPTO=y
+CONFIG_CRYPTO_AES_ARM64=m
+CONFIG_CRYPTO_AES_ARM64_BS=m
+CONFIG_CRYPTO_AES_ARM64_NEON_BLK=m
 CONFIG_CRC_ITU_T=y
 CONFIG_LIBCRC32C=y
brcm2708: add kernel 4.14 support Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> 2018-11-10 11:03:18 +00:00			`From d6e7ba1d656451d196d3175780e819abad063edf Mon Sep 17 00:00:00 2001`
			`From: eccgecko <36884529+eccgecko@users.noreply.github.com>`
			`Date: Wed, 23 May 2018 19:22:33 +0200`
			`Subject: [PATCH 307/454] Enable AES, AES bit slice, and AES NEON engines on`
			`arm64`

			`---`
			`arch/arm64/configs/bcmrpi3_defconfig \| 3 +++`
			`1 file changed, 3 insertions(+)`

			`--- a/arch/arm64/configs/bcmrpi3_defconfig`
			`+++ b/arch/arm64/configs/bcmrpi3_defconfig`
			`@@ -1274,5 +1274,8 @@ CONFIG_CRYPTO_DES=y`
			`CONFIG_CRYPTO_LZ4=m`
			`CONFIG_CRYPTO_USER_API_SKCIPHER=m`
			`CONFIG_ARM64_CRYPTO=y`
			`+CONFIG_CRYPTO_AES_ARM64=m`
			`+CONFIG_CRYPTO_AES_ARM64_BS=m`
			`+CONFIG_CRYPTO_AES_ARM64_NEON_BLK=m`
			`CONFIG_CRC_ITU_T=y`
			`CONFIG_LIBCRC32C=y`