openwrt/target/linux/bmips/dts/bcm6369-netgear-evg2000.dts

244 lines
3.6 KiB
Plaintext
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
#include "bcm6368.dtsi"
/ {
model = "Netgear EVG2000";
compatible = "netgear,evg2000", "brcm,bcm6369", "brcm,bcm6368";
aliases {
led-boot = &led_power_green;
led-failsafe = &led_power_red;
led-running = &led_power_green;
led-upgrade = &led_power_green;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
wps {
label = "wps";
gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
led-2 {
label = "green:voip2";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
led-4 {
label = "red:internet";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
led-5 {
label = "green:internet";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
led-14 {
label = "green:voip1";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
led-15 {
function = LED_FUNCTION_USB;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
led_power_green: led-22 {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
led_power_red: led-23 {
function = LED_FUNCTION_POWER;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
panic-indicator;
};
led-24 {
function = LED_FUNCTION_LAN;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
};
led-27 {
function = LED_FUNCTION_WAN;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
};
};
bcm4322-sprom {
compatible = "brcm,ssb-sprom";
pci-bus = <0>;
pci-dev = <1>;
nvmem-cells = <&macaddr_cfe_6a0 1>;
nvmem-cell-names = "mac-address";
brcm,sprom = "brcm/bcm4322-sprom.bin";
brcm,sprom-fixups = <219 0xec08>;
};
};
&ehci {
status = "okay";
};
&ethernet {
status = "okay";
nvmem-cells = <&macaddr_cfe_6a0 0>;
nvmem-cell-names = "mac-address";
};
&mdio_ext {
switch@1e {
compatible = "brcm,bcm53115";
reg = <30>;
dsa,member = <1 0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "wan";
};
port@1 {
reg = <1>;
label = "lan1";
};
port@2 {
reg = <2>;
label = "lan2";
};
port@3 {
reg = <3>;
label = "lan3";
};
port@4 {
reg = <4>;
label = "lan4";
};
port@8 {
reg = <8>;
phy-mode = "rgmii";
ethernet = <&switch0port5>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
};
&switch0 {
dsa,member = <0 0>;
ports {
switch0port5: port@5 {
reg = <5>;
label = "extsw";
phy-mode = "rgmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
&pflash {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "CFE";
reg = <0x000000 0x020000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_cfe_6a0: macaddr@6a0 {
compatible = "mac-base";
reg = <0x6a0 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
partition@20000 {
label = "firmware";
reg = <0x020000 0xf40000>;
compatible = "brcm,bcm963xx-imagetag";
};
partition@f60000 {
label = "board_data";
reg = <0xf60000 0x080000>;
read-only;
};
partition@fe0000 {
label = "nvram";
reg = <0xfe0000 0x020000>;
};
};
};
&ohci {
status = "okay";
};
&pci {
status = "okay";
};
&uart0 {
status = "okay";
};
&usbh {
status = "okay";
};