ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-30 18:47:06 +00:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity
9f76cda378
openwrt/target/linux/apm821xx/sata/config-default

61 lines
1.4 KiB
Plaintext
Raw Normal View History

apm821xx: add support for the Western Digital MyBook Live Series Hardware Highlights: This patch adds support for Western Digital MyBook Live Series: CPU: AMCC PowerPC UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz) 32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory Board: Apollo-3G - APM82181 Board, 1*SATA DRAM: 256 MB (2x NT5TU64M16GG-AC) FLASH: 512 kB (SST 39VF040) Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! The MyBook Live Duo additionally features a 1x USB 2.0 host port and can support a second hard-drive. This target produces two images for a target. 1. ext4 image The extracted/raw image can be directly installed on the internal HDD via "dd if=img.ext4 of=/dev/sdX". This can either be done in place with the stock MyBook Live firmware via ssh. Or by removing the HDD and writing the image with a different PC. The the compressed images are useful for sysupgrade. 2. recovery.tar image for TFTP and Serial. extract the recovery.tar to a TFTP server directory. On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert: # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self Where 192.168.1.254 is your TFTP server. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-20 13:44:54 +00:00
CONFIG_APOLLO3G=y
CONFIG_ATA=y
CONFIG_ATA_BMDMA=y
kernel: Reorder config files Reorder the kernel configuration files. This was done uisng: ./scripts/kconfig-reorder.sh Link: https://github.com/openwrt/openwrt/pull/16743 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-20 13:31:23 +00:00
CONFIG_ATA_SFF=y
CONFIG_BLK_DEV_DM=y
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_MD=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_PM=y
CONFIG_BROADCOM_PHY=y
apm821xx: disable and move kernel CONFIG_ symbols try to reduce the kernel size by disabling and moving options from the common kernel configuration to the SATA target that doesn't have the constraints. For NAND this has become necessary because as with 5.10 some devices outgrew their kernels. Though, in my tests this didn't help much: just a smidgen over 100kib was saved on the uncompressed kernel. ... running make kernel_oldconfig also removed some other config symbols, mostly those that already set from elsewhere or became obsolete in the meantime. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2021-10-09 22:39:41 +00:00
CONFIG_CRYPTO_MD5_PPC=y
CONFIG_CRYPTO_SHA1_PPC=y
apm821xx: add support for the Western Digital MyBook Live Series Hardware Highlights: This patch adds support for Western Digital MyBook Live Series: CPU: AMCC PowerPC UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz) 32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory Board: Apollo-3G - APM82181 Board, 1*SATA DRAM: 256 MB (2x NT5TU64M16GG-AC) FLASH: 512 kB (SST 39VF040) Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! The MyBook Live Duo additionally features a 1x USB 2.0 host port and can support a second hard-drive. This target produces two images for a target. 1. ext4 image The extracted/raw image can be directly installed on the internal HDD via "dd if=img.ext4 of=/dev/sdX". This can either be done in place with the stock MyBook Live firmware via ssh. Or by removing the HDD and writing the image with a different PC. The the compressed images are useful for sysupgrade. 2. recovery.tar image for TFTP and Serial. extract the recovery.tar to a TFTP server directory. On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert: # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self Where 192.168.1.254 is your TFTP server. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-20 13:44:54 +00:00
CONFIG_EXT4_FS=y
apm821xx: build squashfs-rootfs images for the MBL This patch adds support for squashfs as the root filesystem. advantages: - migrate from a existing -ext4 installation and back with the sysupgrade utility - existing partition layout will not be lost during switch - slightly smaller image size as compared to the -ext4 image. disadvantages: - needs f2fs + tools. This is because fstools rootdisk.c decides based on the partition size (currently root partitions > 100 MiB) f2fs is used as the rootfs_data filesystem. - rootfs_data is placed into the rootfs partition after the squashfs. This makes it difficult for tools that expect a /dev/sda${X} device. It also makes it difficult for data recovery tools as they might not expect to find a embedded partition or will be slightly confused. ... or will not support f2fs. For people with existing build configurations: make sure to include mkf2fs and f2fsck packages into the image. Otherwise the new -squashfs image will only boot from the ram-overlay. Note: All overlay data (configurations/all installed packages/...) will be placed in inside the rootfs partition (i.e. /dev/sda2) just after the squashfs image. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-07-29 09:55:15 +00:00
CONFIG_F2FS_FS=y
apm821xx: disable and move kernel CONFIG_ symbols try to reduce the kernel size by disabling and moving options from the common kernel configuration to the SATA target that doesn't have the constraints. For NAND this has become necessary because as with 5.10 some devices outgrew their kernels. Though, in my tests this didn't help much: just a smidgen over 100kib was saved on the uncompressed kernel. ... running make kernel_oldconfig also removed some other config symbols, mostly those that already set from elsewhere or became obsolete in the meantime. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2021-10-09 22:39:41 +00:00
CONFIG_FREEZER=y
CONFIG_FW_CACHE=y
kernel: Reorder config files Reorder the kernel configuration files. This was done uisng: ./scripts/kconfig-reorder.sh Link: https://github.com/openwrt/openwrt/pull/16743 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-20 13:31:23 +00:00
CONFIG_GPIO_74XX_MMIO=y
apm821xx: add support for the Western Digital MyBook Live Series Hardware Highlights: This patch adds support for Western Digital MyBook Live Series: CPU: AMCC PowerPC UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz) 32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory Board: Apollo-3G - APM82181 Board, 1*SATA DRAM: 256 MB (2x NT5TU64M16GG-AC) FLASH: 512 kB (SST 39VF040) Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! The MyBook Live Duo additionally features a 1x USB 2.0 host port and can support a second hard-drive. This target produces two images for a target. 1. ext4 image The extracted/raw image can be directly installed on the internal HDD via "dd if=img.ext4 of=/dev/sdX". This can either be done in place with the stock MyBook Live firmware via ssh. Or by removing the HDD and writing the image with a different PC. The the compressed images are useful for sysupgrade. 2. recovery.tar image for TFTP and Serial. extract the recovery.tar to a TFTP server directory. On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert: # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self Where 192.168.1.254 is your TFTP server. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-20 13:44:54 +00:00
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_GENERIC_PLATFORM=y
apm821xx: backport generic HDD led-triggers for WNDR4700 and MBL This patch backports the new generic HDD/SDD led-trigger from 4.8-rc1. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-08-30 17:42:39 +00:00
CONFIG_LEDS_TRIGGER_DISK=y
apm821xx: add support for the Western Digital MyBook Live Series Hardware Highlights: This patch adds support for Western Digital MyBook Live Series: CPU: AMCC PowerPC UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz) 32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory Board: Apollo-3G - APM82181 Board, 1*SATA DRAM: 256 MB (2x NT5TU64M16GG-AC) FLASH: 512 kB (SST 39VF040) Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! The MyBook Live Duo additionally features a 1x USB 2.0 host port and can support a second hard-drive. This target produces two images for a target. 1. ext4 image The extracted/raw image can be directly installed on the internal HDD via "dd if=img.ext4 of=/dev/sdX". This can either be done in place with the stock MyBook Live firmware via ssh. Or by removing the HDD and writing the image with a different PC. The the compressed images are useful for sysupgrade. 2. recovery.tar image for TFTP and Serial. extract the recovery.tar to a TFTP server directory. On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert: # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self Where 192.168.1.254 is your TFTP server. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-20 13:44:54 +00:00
CONFIG_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_MULTIPATH is not set
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
apm821xx: MBL: make mtd chip work The MBL has a 512KiB Microchip SST39VF040 chip for uboot and not much else. Thanks to Ewald who figured out that the "jedec-probe" vs. "jedec-flash" was the wrong binding. With this information and the jedec-probe support enabled => the chip works. | physmap-flash 4fff80000.nor_flash: physmap platform flash device: [mem 0x4fff80000-0x4ffffffff] | Found: SST 39LF040 | 4fff80000.nor_flash: Found 1 x8 devices at 0x0 in 8-bit bank Suggested-by: Ewald Comhaire <e.comhaire@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2022-06-12 09:48:01 +00:00
CONFIG_MTD_JEDECPROBE=y
kernel: Reorder config files Reorder the kernel configuration files. This was done uisng: ./scripts/kconfig-reorder.sh Link: https://github.com/openwrt/openwrt/pull/16743 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-20 13:31:23 +00:00
CONFIG_MTD_PHYSMAP=y
apm821xx: disable and move kernel CONFIG_ symbols try to reduce the kernel size by disabling and moving options from the common kernel configuration to the SATA target that doesn't have the constraints. For NAND this has become necessary because as with 5.10 some devices outgrew their kernels. Though, in my tests this didn't help much: just a smidgen over 100kib was saved on the uncompressed kernel. ... running make kernel_oldconfig also removed some other config symbols, mostly those that already set from elsewhere or became obsolete in the meantime. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2021-10-09 22:39:41 +00:00
CONFIG_PM=y
CONFIG_PM_AUTOSLEEP=y
CONFIG_PM_CLK=y
CONFIG_PM_SLEEP=y
apm821xx: add 6.1 testing kernel refreshed kernel config, otherwise same as 5.15.
2023-05-28 20:14:53 +00:00
# CONFIG_PM_USERSPACE_AUTOSLEEP is not set
apm821xx: disable and move kernel CONFIG_ symbols try to reduce the kernel size by disabling and moving options from the common kernel configuration to the SATA target that doesn't have the constraints. For NAND this has become necessary because as with 5.10 some devices outgrew their kernels. Though, in my tests this didn't help much: just a smidgen over 100kib was saved on the uncompressed kernel. ... running make kernel_oldconfig also removed some other config symbols, mostly those that already set from elsewhere or became obsolete in the meantime. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2021-10-09 22:39:41 +00:00
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_GC=y
CONFIG_PM_WAKELOCKS_LIMIT=100
kernel: Reorder config files Reorder the kernel configuration files. This was done uisng: ./scripts/kconfig-reorder.sh Link: https://github.com/openwrt/openwrt/pull/16743 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-20 13:31:23 +00:00
CONFIG_PPC4xx_CPM=y
apm821xx: add support for the Western Digital MyBook Live Series Hardware Highlights: This patch adds support for Western Digital MyBook Live Series: CPU: AMCC PowerPC UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz) 32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory Board: Apollo-3G - APM82181 Board, 1*SATA DRAM: 256 MB (2x NT5TU64M16GG-AC) FLASH: 512 kB (SST 39VF040) Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! The MyBook Live Duo additionally features a 1x USB 2.0 host port and can support a second hard-drive. This target produces two images for a target. 1. ext4 image The extracted/raw image can be directly installed on the internal HDD via "dd if=img.ext4 of=/dev/sdX". This can either be done in place with the stock MyBook Live firmware via ssh. Or by removing the HDD and writing the image with a different PC. The the compressed images are useful for sysupgrade. 2. recovery.tar image for TFTP and Serial. extract the recovery.tar to a TFTP server directory. On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert: # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self Where 192.168.1.254 is your TFTP server. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-20 13:44:54 +00:00
CONFIG_PPC_EARLY_DEBUG=y
apm821xx: add 6.1 testing kernel refreshed kernel config, otherwise same as 5.15.
2023-05-28 20:14:53 +00:00
# CONFIG_PPC_EARLY_DEBUG_16550 is not set
kernel: Reorder config files Reorder the kernel configuration files. This was done uisng: ./scripts/kconfig-reorder.sh Link: https://github.com/openwrt/openwrt/pull/16743 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-20 13:31:23 +00:00
CONFIG_PPC_EARLY_DEBUG_44x=y
apm821xx: add support for the Western Digital MyBook Live Series Hardware Highlights: This patch adds support for Western Digital MyBook Live Series: CPU: AMCC PowerPC UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz) 32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory Board: Apollo-3G - APM82181 Board, 1*SATA DRAM: 256 MB (2x NT5TU64M16GG-AC) FLASH: 512 kB (SST 39VF040) Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! The MyBook Live Duo additionally features a 1x USB 2.0 host port and can support a second hard-drive. This target produces two images for a target. 1. ext4 image The extracted/raw image can be directly installed on the internal HDD via "dd if=img.ext4 of=/dev/sdX". This can either be done in place with the stock MyBook Live firmware via ssh. Or by removing the HDD and writing the image with a different PC. The the compressed images are useful for sysupgrade. 2. recovery.tar image for TFTP and Serial. extract the recovery.tar to a TFTP server directory. On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert: # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self Where 192.168.1.254 is your TFTP server. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-20 13:44:54 +00:00
CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x4
CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300
kernel: Reorder config files Reorder the kernel configuration files. This was done uisng: ./scripts/kconfig-reorder.sh Link: https://github.com/openwrt/openwrt/pull/16743 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-20 13:31:23 +00:00
# CONFIG_PPC_EARLY_DEBUG_MEMCONS is not set
apm821xx: clean up gpio-hogs convert the usb and both sata port power related gpio-hogs to what they really are: fixed-regulators. The ethernet phy-reset gpio-hog is replaced by a proper upstream (4.15+) reset-gpios property in the mdio-node. So this will work eventually. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-07-29 09:55:17 +00:00
CONFIG_REGULATOR_FIXED_VOLTAGE=y
kernel: Reorder config files Reorder the kernel configuration files. This was done uisng: ./scripts/kconfig-reorder.sh Link: https://github.com/openwrt/openwrt/pull/16743 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-10-20 13:31:23 +00:00
CONFIG_SATA_DWC=y
# CONFIG_SATA_DWC_DEBUG is not set
# CONFIG_SATA_DWC_OLD_DMA is not set
CONFIG_SATA_PMP=y
CONFIG_SCSI=y
apm821xx: disable and move kernel CONFIG_ symbols try to reduce the kernel size by disabling and moving options from the common kernel configuration to the SATA target that doesn't have the constraints. For NAND this has become necessary because as with 5.10 some devices outgrew their kernels. Though, in my tests this didn't help much: just a smidgen over 100kib was saved on the uncompressed kernel. ... running make kernel_oldconfig also removed some other config symbols, mostly those that already set from elsewhere or became obsolete in the meantime. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2021-10-09 22:39:41 +00:00
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
apm821xx: MBL DUO-only: enable USB-Storage for boot from USB support it is possible to boot and run OpenWrt from an image on an USB-Stick on the MyBook Live DUO. (No, the MyBook Live Single does NOT have an USB-Port and attempts at enabling it sadly all failed... so far). To do that: First, prepare a USB-Stick by writing the raw and uncompressed OpenWRT factory image for the device onto the stick (i.e. # gunzip -c openwrt-*wd_mybooklive*-factory.img.gz > /dev/sd$XX). Then enter the u-boot via an attached TTL/CMOS 3.3V cable adapter and give the following commands a try in the: usb start; sata init ext2load usb 0:1 ${fdt_addr_r} /boot/apollo3g.dtb ext2load usb 0:1 ${kernel_addr_r} /boot/uImage setenv bootargs 'root=/dev/sdc2 rw rootfstype=squashfs,ext4 rootdelay=5' run addtty; bootm ${kernel_addr_r} - ${fdt_addr_r} Notes: - booting from USB-Sticks takes a long time! Be prepared to wait a few minutes. (~3 minutes for 4 MiB /boot/uImage file on a USB 2.0 Stick) - the bootargs part 'root=/dev/sdX2' depends on how many HDDs/SSDs are slotted in. (if none: then use sda, if one: sdb. if two: sdc) - rootdelay is important as the storage on the USB-Sticks do not show up fast enough. 5 seconds might be excessive though. - it's possible to concat these commands together in one line and write it into u-boot's "bootcmd" environment variable and save the environment to make the device to always boot from USB from then on. if you have accidentally overridden the 'bootcmd' and want to return to 'spec' enter the following commands : setenv bootcmd 'run boot_sata_script_ap2nc' saveenv Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2024-02-17 20:16:12 +00:00
CONFIG_USB=y
CONFIG_USB_COMMON=y
CONFIG_USB_DWC2=y
CONFIG_USB_DWC2_HOST=y
CONFIG_USB_ROLE_SWITCH=y
CONFIG_USB_STORAGE=y
Reference in New Issue Copy Permalink