openwrt/target/linux/ramips/dts/mt7628an_minew_g1-c.dts

156 lines
2.4 KiB
Plaintext
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7628an.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Minew G1-C";
compatible = "minew,g1-c", "mediatek,mt7628an-soc";
aliases {
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
led_system: system {
label = "red:system";
gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
gpio-export {
compatible = "gpio-export";
#size-cells = <0>;
ws2812 {
gpio-export,name = "ws2812";
gpio-export,output = <1>;
gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
};
nrf_power {
gpio-export,name = "nrf_power";
gpio-export,output = <1>;
gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
};
};
};
&state_default {
gpio {
groups = "gpio";
function = "gpio";
};
p0led_an {
groups = "p0led_an";
function = "gpio";
};
uart1 {
groups = "uart1";
function = "gpio";
};
wdt {
groups = "wdt";
function = "gpio";
};
};
&spi0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
m25p80@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
};
partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x400>;
};
macaddr_factory_28: macaddr@28 {
reg = <0x28 0x6>;
};
};
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};
};
&ethernet {
nvmem-cells = <&macaddr_factory_28>;
nvmem-cell-names = "mac-address";
};
&esw {
mediatek,portmap = <0x3e>;
};
&wmac {
status = "okay";
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
};
&sdhci {
status = "okay";
cd-inverted;
};