mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 21:58:04 +00:00
63 lines
2.3 KiB
Diff
63 lines
2.3 KiB
Diff
|
From 4d2261fe86ce08bbee3c000718000e9f86593d88 Mon Sep 17 00:00:00 2001
|
||
|
From: Jonathan Bell <jonathan@raspberrypi.com>
|
||
|
Date: Wed, 8 Nov 2023 11:52:16 +0000
|
||
|
Subject: [PATCH] drivers: mmc: sdhci: add SPURIOUS_INT_RESP quirk
|
||
|
|
||
|
Certain controllers (dwc-mshc) generate timeout conditions separately to
|
||
|
command-completion conditions, where the end result is interrupts are
|
||
|
separated in time depending on the current SDCLK frequency.
|
||
|
|
||
|
This causes spurious interrupts if SDCLK is slow compared to the CPU's
|
||
|
ability to process and return from interrupt. This occurs during card
|
||
|
probe with an empty slot where all commands that would generate a
|
||
|
response time out.
|
||
|
|
||
|
Add a quirk to squelch command response interrupts when a command
|
||
|
timeout interrupt is received.
|
||
|
|
||
|
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
|
||
|
---
|
||
|
drivers/mmc/host/sdhci.c | 11 +++++++++++
|
||
|
drivers/mmc/host/sdhci.h | 3 +++
|
||
|
2 files changed, 14 insertions(+)
|
||
|
|
||
|
--- a/drivers/mmc/host/sdhci.c
|
||
|
+++ b/drivers/mmc/host/sdhci.c
|
||
|
@@ -1728,6 +1728,12 @@ static bool sdhci_send_command(struct sd
|
||
|
if (host->use_external_dma)
|
||
|
sdhci_external_dma_pre_transfer(host, cmd);
|
||
|
|
||
|
+ if (host->quirks2 & SDHCI_QUIRK2_SPURIOUS_INT_RESP) {
|
||
|
+ host->ier |= SDHCI_INT_RESPONSE;
|
||
|
+ sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
|
||
|
+ sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
|
||
|
+ }
|
||
|
+
|
||
|
sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
|
||
|
|
||
|
return true;
|
||
|
@@ -3330,6 +3336,11 @@ static void sdhci_cmd_irq(struct sdhci_h
|
||
|
if (intmask & SDHCI_INT_TIMEOUT) {
|
||
|
host->cmd->error = -ETIMEDOUT;
|
||
|
sdhci_err_stats_inc(host, CMD_TIMEOUT);
|
||
|
+ if (host->quirks2 & SDHCI_QUIRK2_SPURIOUS_INT_RESP) {
|
||
|
+ host->ier &= ~SDHCI_INT_RESPONSE;
|
||
|
+ sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
|
||
|
+ sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
|
||
|
+ }
|
||
|
} else {
|
||
|
host->cmd->error = -EILSEQ;
|
||
|
if (!mmc_op_tuning(host->cmd->opcode))
|
||
|
--- a/drivers/mmc/host/sdhci.h
|
||
|
+++ b/drivers/mmc/host/sdhci.h
|
||
|
@@ -486,6 +486,9 @@ struct sdhci_host {
|
||
|
#define SDHCI_QUIRK2_NO_SDR50 (1<<20)
|
||
|
#define SDHCI_QUIRK2_NO_SDR104 (1<<21)
|
||
|
|
||
|
+/* Command timeouts may generate a trailing INT_RESPONSE later */
|
||
|
+#define SDHCI_QUIRK2_SPURIOUS_INT_RESP (1<<31)
|
||
|
+
|
||
|
int irq; /* Device IRQ */
|
||
|
void __iomem *ioaddr; /* Mapped address */
|
||
|
phys_addr_t mapbase; /* physical address base */
|