openwrt/target/linux/ramips/rt305x/target.mk

#
# Copyright (C) 2009 OpenWrt.org
#

SUBTARGET:=rt305x
BOARDNAME:=RT3x5x/RT5350 based boards
FEATURES+=usb ramdisk small_flash
CPU_TYPE:=24kc

DEFAULT_PACKAGES += kmod-rt2800-soc wpad-basic-mbedtls swconfig

define Target/Description
	Build firmware images for Ralink RT3x5x/RT5350 based boards.
endef
initial support for RT288x/RT305x SVN-Revision: 17439 2009-08-30 19:15:51 +00:00			`#`
			`# Copyright (C) 2009 OpenWrt.org`
			`#`

			`SUBTARGET:=rt305x`
ramips: set correct description for rt305x subtarget Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36775 2013-05-30 15:59:56 +00:00			`BOARDNAME:=RT3x5x/RT5350 based boards`
kernel: only optimized for size if small_flash Add a new config option to allow to select the default compile optimization level for the kernel. Select the optimization for size by default if the small_flash feature is set. Otherwise "Optimize for performance" is set. Add the small_flash feature flag to all (sub)targets which had the optimization for size in their default kernel config. Remove CC_OPTIMIZE_FOR_* symbols from all kernel configs to apply the new setting. Exceptions to the above are: - lantiq, where the optimization for size is only required for the xway_legacy subtarget but was set for the whole target - mediatek, ramips/mt7620 & ramips/mt76x8 where boards should have plenty of space and an optimization for size doesn't make much sense - rb532, which has 128MByte flash Signed-off-by: Mathias Kresin <dev@kresin.me> 2018-07-09 20:48:56 +02:00			`FEATURES+=usb ramdisk small_flash`
ramips: switch from 24kec to 24kc Since the only difference between 24Kec and 24Kc is the addition of DSP ASE support, and we don't use it anymore, there is no need to keep 24Kec as a separate cpu type. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> 2016-08-08 11:27:04 +02:00			`CPU_TYPE:=24kc`
initial support for RT288x/RT305x SVN-Revision: 17439 2009-08-30 19:15:51 +00:00
treewide: replace wpad-basic-wolfssl default The newly merged mbedtls backend is smaller and has fewer ABI related issues than the wolfSSL one. Signed-off-by: Rosen Penev <rosenp@gmail.com> 2022-12-27 20:44:11 -08:00			`DEFAULT_PACKAGES += kmod-rt2800-soc wpad-basic-mbedtls swconfig`
ramips: fix rt2x00 handling of default packages for subtargets Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 41145 2014-06-11 17:01:19 +00:00
initial support for RT288x/RT305x SVN-Revision: 17439 2009-08-30 19:15:51 +00:00			`define Target/Description`
ramips: set correct description for rt305x subtarget Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 36775 2013-05-30 15:59:56 +00:00			`Build firmware images for Ralink RT3x5x/RT5350 based boards.`
initial support for RT288x/RT305x SVN-Revision: 17439 2009-08-30 19:15:51 +00:00			`endef`