openwrt/target/linux/bcm27xx/patches-6.1/950-0998-media-rp1-cfe-Fix-width-height-in-cfe_start_channel.patch

From 84c9958dd71b8a4dcf16cbf6fdb867c668652634 Mon Sep 17 00:00:00 2001
From: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Date: Wed, 27 Sep 2023 16:00:39 +0300
Subject: [PATCH] media: rp1: cfe: Fix width & height in cfe_start_channel()

The logic for handling width & height in cfe_start_channel() is somewhat
odd and, afaics, broken. The code reads:

bool start_fe = is_fe_enabled(cfe) &&
                test_all_nodes(cfe, NODE_ENABLED, NODE_STREAMING);

if (start_fe || is_image_output_node(node)) {
        width = node->fmt.fmt.pix.width;
        height = node->fmt.fmt.pix.height;
}

cfe_start_channel() is called for all video nodes that will be used. So
this means that if, say, fe_stats is enabled as the last node, start_fe
will be true, and width and height will be taken from fe_stats' node.
The width and height will thus contain garbage, which then gets
programmed to the csi2 registers.

It seems that this often still works fine, though, probably if the width
& height are large enough.

Drop the above code, and instead get the width & height from the csi2
subdev's sink pad for the csi2 channel that is used. For metadata the
width & height will be 0 as before.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
---
 drivers/media/platform/raspberrypi/rp1_cfe/cfe.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

--- a/drivers/media/platform/raspberrypi/rp1_cfe/cfe.c
+++ b/drivers/media/platform/raspberrypi/rp1_cfe/cfe.c
@@ -763,20 +763,16 @@ static void cfe_start_channel(struct cfe
 	struct v4l2_mbus_framefmt *source_fmt;
 	const struct cfe_fmt *fmt;
 	unsigned long flags;
-	unsigned int width = 0, height = 0;
 	bool start_fe = is_fe_enabled(cfe) &&
 			test_all_nodes(cfe, NODE_ENABLED, NODE_STREAMING);
 
 	cfe_dbg("%s: [%s]\n", __func__, node_desc[node->id].name);
 
-	if (start_fe || is_image_output_node(node)) {
-		width = node->fmt.fmt.pix.width;
-		height = node->fmt.fmt.pix.height;
-	}
-
 	state = v4l2_subdev_lock_and_get_active_state(&cfe->csi2.sd);
 
 	if (start_fe) {
+		unsigned int width, height;
+
 		WARN_ON(!is_fe_enabled(cfe));
 		cfe_dbg("%s: %s using csi2 channel %d\n",
 			__func__, node_desc[FE_OUT0].name,
@@ -785,6 +781,9 @@ static void cfe_start_channel(struct cfe
 		source_fmt = v4l2_subdev_get_pad_format(&cfe->csi2.sd, state, cfe->fe_csi2_channel);
 		fmt = find_format_by_code(source_fmt->code);
 
+		width = source_fmt->width;
+		height = source_fmt->height;
+
 		/*
 		 * Start the associated CSI2 Channel as well.
 		 *
@@ -800,6 +799,8 @@ static void cfe_start_channel(struct cfe
 	}
 
 	if (is_csi2_node(node)) {
+		unsigned int width = 0, height = 0;
+
 		u32 mode = CSI2_MODE_NORMAL;
 
 		source_fmt = v4l2_subdev_get_pad_format(&cfe->csi2.sd, state,
@@ -807,6 +808,9 @@ static void cfe_start_channel(struct cfe
 		fmt = find_format_by_code(source_fmt->code);
 
 		if (is_image_output_node(node)) {
+			width = source_fmt->width;
+			height = source_fmt->height;
+
 			if (node->fmt.fmt.pix.pixelformat ==
 					fmt->remap[CFE_REMAP_16BIT])
 				mode = CSI2_MODE_REMAP;