ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-22 06:57:57 +00:00
Code Issues Actions 1 Packages Projects Releases Wiki Activity
998b973157
openwrt/package/boot/uboot-mediatek/Makefile

325 lines
8.5 KiB
Makefile
Raw Normal View History

mediatek: add uboot Signed-off-by: John Crispin <john@phrozen.org>
2020-05-04 14:31:19 +00:00
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
uboot-mediatek: update to v2023.04 Update to next U-Boot timed release. Remove now obsolete patch 100-01-board-mediatek-add-more-network-configurations.patch Default IP addresses are now dealt with in Kconfig, no longer in board- specific C header files. Add patches to restore ANSI support in bootmenu which was broken upstream, always use high-speed mode on serial UART for improved stability and fix an issue with pinconf not being applied on MT7623 resulting in eMMC being inaccessible when booting from micro SD card. In order to keep the size of the bootloader on MT7623 below 512kB remove some unneeded commands on both MT7623 boards. Tested on: * BananaPi BPi-R2 (MT7623N) * BananaPi BPi-R3 (MT7986A) * BananaPi BPi-R64 (MT7622A) * Linksys E8450 (MT7622B) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2023-04-11 23:21:22 +00:00
PKG_VERSION:=2023.04
PKG_HASH:=e31cac91545ff41b71cec5d8c22afd695645cd6e2a442ccdacacd60534069341
uboot-mediatek: update to U-Boot 2023.01 Support for MT7981 and MT7986 has been merged, remove patches. Tested on a couple of MT7986, MT7622 and MT7623 boards. MIPS builds are untested. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2023-01-13 03:13:24 +00:00
PKG_BUILD_DEPENDS:=!(TARGET_ramips||TARGET_mediatek_mt7623):arm-trusted-firmware-tools/host
mediatek: add uboot Signed-off-by: John Crispin <john@phrozen.org>
2020-05-04 14:31:19 +00:00
include $(INCLUDE_DIR)/u-boot.mk
include $(INCLUDE_DIR)/package.mk
include $(INCLUDE_DIR)/host-build.mk
uboot-mediatek: mt7621: use silent stage1 by default Use faster and silent MT7621 stage1 blob by default unless CONFIG_DEBUG is selected. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-08-09 23:23:34 +00:00
MT7621_LOWLEVEL_PRELOADER_URL:=https://raw.githubusercontent.com/mtk-openwrt/mt7621-lowlevel-preloader/a03b07c60bf1ba4add9b671d32caa102fe948180/
uboot-ramips: add support for MT7621, merge into uboot-mediatek * Merge uboot-ramips into uboot-mediatek. * Port support for the RAVPower RP WD009 to U-Boot 2022.07. * Add support for MT7621 and add builds for the reference boards. * Add builds for MT7620 and MT7628 reference boards. This should help to make development of U-Boot-level board support for all MediaTek targets much easier. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-11 20:15:32 +00:00
define Download/mt7621-stage-sram
FILE:=mt7621_stage_sram.bin
URL:=$(MT7621_LOWLEVEL_PRELOADER_URL)
HASH:=1dda68aa089f0ff262e01539b990dea478952e9fb68bcc0a8cd6f76f0135c62e
endef
uboot-mediatek: mt7621: use silent stage1 by default Use faster and silent MT7621 stage1 blob by default unless CONFIG_DEBUG is selected. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-08-09 23:23:34 +00:00
define Download/mt7621-stage-sram-noprint
FILE:=mt7621_stage_sram_noprint.bin
URL:=$(MT7621_LOWLEVEL_PRELOADER_URL)
HASH:=8ee419275144fc298e9444d413d98e965a55d283152a74ea6a1f8de79eb516b6
endef
uboot-ramips: add support for MT7621, merge into uboot-mediatek * Merge uboot-ramips into uboot-mediatek. * Port support for the RAVPower RP WD009 to U-Boot 2022.07. * Add support for MT7621 and add builds for the reference boards. * Add builds for MT7620 and MT7628 reference boards. This should help to make development of U-Boot-level board support for all MediaTek targets much easier. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-11 20:15:32 +00:00
ifdef CONFIG_TARGET_ramips_mt7621
uboot-mediatek: mt7621: use silent stage1 by default Use faster and silent MT7621 stage1 blob by default unless CONFIG_DEBUG is selected. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-08-09 23:23:34 +00:00
ifdef CONFIG_DEBUG
uboot-ramips: add support for MT7621, merge into uboot-mediatek * Merge uboot-ramips into uboot-mediatek. * Port support for the RAVPower RP WD009 to U-Boot 2022.07. * Add support for MT7621 and add builds for the reference boards. * Add builds for MT7620 and MT7628 reference boards. This should help to make development of U-Boot-level board support for all MediaTek targets much easier. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-11 20:15:32 +00:00
$(eval $(call Download,mt7621-stage-sram))
uboot-mediatek: mt7621: use silent stage1 by default Use faster and silent MT7621 stage1 blob by default unless CONFIG_DEBUG is selected. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-08-09 23:23:34 +00:00
else
$(eval $(call Download,mt7621-stage-sram-noprint))
endif
uboot-ramips: add support for MT7621, merge into uboot-mediatek * Merge uboot-ramips into uboot-mediatek. * Port support for the RAVPower RP WD009 to U-Boot 2022.07. * Add support for MT7621 and add builds for the reference boards. * Add builds for MT7620 and MT7628 reference boards. This should help to make development of U-Boot-level board support for all MediaTek targets much easier. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-11 20:15:32 +00:00
endif
mediatek: add uboot Signed-off-by: John Crispin <john@phrozen.org>
2020-05-04 14:31:19 +00:00
define U-Boot/Default
BUILD_TARGET:=mediatek
UBOOT_IMAGE:=u-boot-mtk.bin
uboot-mediatek: mark all packages as hidden They are enabled by selecting devices. Fixes build errors when enabling extra devices without creating a new config from scratch. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-03-04 15:26:54 +00:00
HIDDEN:=1
mediatek: add uboot Signed-off-by: John Crispin <john@phrozen.org>
2020-05-04 14:31:19 +00:00
endef
uboot-ramips: add support for MT7621, merge into uboot-mediatek * Merge uboot-ramips into uboot-mediatek. * Port support for the RAVPower RP WD009 to U-Boot 2022.07. * Add support for MT7621 and add builds for the reference boards. * Add builds for MT7620 and MT7628 reference boards. This should help to make development of U-Boot-level board support for all MediaTek targets much easier. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-11 20:15:32 +00:00
define U-Boot/mt7620_rfb
NAME:=MT7620 Reference Board
UBOOT_CONFIG:=mt7620_rfb
BUILD_DEVICES:=ralink_mt7620a-evb
BUILD_TARGET:=ramips
BUILD_SUBTARGET:=mt7620
UBOOT_IMAGE:=u-boot-with-spl.bin
endef
define U-Boot/mt7620_mt7530_rfb
NAME:=MT7620+MT7530 Reference Board
UBOOT_CONFIG:=mt7620_mt7530_rfb
BUILD_DEVICES:=ralink_mt7620a-mt7530-evb
BUILD_TARGET:=ramips
BUILD_SUBTARGET:=mt7620
UBOOT_IMAGE:=u-boot-with-spl.bin
endef
define U-Boot/mt7621_rfb
NAME:=MT7621 Reference Board
UBOOT_CONFIG:=mt7621_rfb
BUILD_DEVICES:=mediatek_mt7621-eval-board
BUILD_TARGET:=ramips
BUILD_SUBTARGET:=mt7621
UBOOT_IMAGE:=u-boot-mt7621.bin
endef
define U-Boot/mt7621_nand_rfb
NAME:=MT7621 Reference Board (NAND)
UBOOT_CONFIG:=mt7621_nand_rfb
BUILD_DEVICES:=mediatek_mt7621-eval-board
BUILD_TARGET:=ramips
BUILD_SUBTARGET:=mt7621
UBOOT_IMAGE:=u-boot-mt7621.bin
endef
uboot-mediatek: rework support for Bananapi BPi-R64 board Provide U-Boot variants for SD-card as well as eMMC boot, so we can generate whole-disk images for the device. While at it, rename 'mt7622' to 'mt7622-rfb1' to make it less confusing now that more boards are being added. Thanks to Frank Wunderlich (@frank-w) for making that nice SVG image explaining the MMC boot process[1] and for providing the necessary binary header blobs. [1]: https://github.com/frank-w/BPI-R64-ATF Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-02-27 15:14:02 +00:00
define U-Boot/mt7622_rfb1
NAME:=MT7622 Reference Board 1
mediatek: add uboot Signed-off-by: John Crispin <john@phrozen.org>
2020-05-04 14:31:19 +00:00
UBOOT_CONFIG:=mt7622_rfb
uboot-mediatek: select matching U-Boot for board Instead of building all U-Boot variants by default, build only those needed by the selected board(s). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-14 19:07:00 +00:00
BUILD_DEVICES:=mediatek_mt7622-rfb1 mediatek_mt7622-rfb1-ubi
BUILD_SUBTARGET:=mt7622
mediatek: add uboot Signed-off-by: John Crispin <john@phrozen.org>
2020-05-04 14:31:19 +00:00
endef
uboot-mediatek: add support for Linksys E8450 Build U-Boot for the Linksys E8450 in order to have support for UBI. The loader has a default environment with scripts handling the reset button as well as fall-back to recovery firmware. If the loader comes up without a valid environment found in UBI, it will automatically make sure UBI is formatted and create a new environment and proceed to load recovery firmware (either from UBI or via TFTP if recovery is corrupted or unavailable). If the button is held down during power-on, the yellow status LED turns on and the bootloader environment is reset to factory defaults. If the button is released at this point, the recovery firmware (if existing) is loaded from UBI and booted. If the button is continously held down even beyond the point that the yellow LED turned on, the loader will try to load the recovery firmware via TFTP from server 192.168.1.254, write it to UBI and boot. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-01-30 13:58:16 +00:00
define U-Boot/mt7622_linksys_e8450
NAME:=Linksys E8450
UBOOT_CONFIG:=mt7622_linksys_e8450
uboot-mediatek: select matching U-Boot for board Instead of building all U-Boot variants by default, build only those needed by the selected board(s). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-14 19:07:00 +00:00
BUILD_DEVICES:=linksys_e8450-ubi
BUILD_SUBTARGET:=mt7622
uboot-mediatek: add support for Linksys E8450 Build U-Boot for the Linksys E8450 in order to have support for UBI. The loader has a default environment with scripts handling the reset button as well as fall-back to recovery firmware. If the loader comes up without a valid environment found in UBI, it will automatically make sure UBI is formatted and create a new environment and proceed to load recovery firmware (either from UBI or via TFTP if recovery is corrupted or unavailable). If the button is held down during power-on, the yellow status LED turns on and the bootloader environment is reset to factory defaults. If the button is released at this point, the recovery firmware (if existing) is loaded from UBI and booted. If the button is continously held down even beyond the point that the yellow LED turned on, the loader will try to load the recovery firmware via TFTP from server 192.168.1.254, write it to UBI and boot. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-01-30 13:58:16 +00:00
UBOOT_IMAGE:=u-boot.fip
BL2_BOOTDEV:=snand
BL2_DDRBLOB:=1
DEPENDS:=+trusted-firmware-a-mt7622-snand-1ddr
endef
uboot-mediatek: rework support for Bananapi BPi-R64 board Provide U-Boot variants for SD-card as well as eMMC boot, so we can generate whole-disk images for the device. While at it, rename 'mt7622' to 'mt7622-rfb1' to make it less confusing now that more boards are being added. Thanks to Frank Wunderlich (@frank-w) for making that nice SVG image explaining the MMC boot process[1] and for providing the necessary binary header blobs. [1]: https://github.com/frank-w/BPI-R64-ATF Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-02-27 15:14:02 +00:00
define U-Boot/mt7622_bananapi_bpi-r64-emmc
NAME:=BananaPi R64 (eMMC)
UBOOT_CONFIG:=mt7622_bananapi_bpi-r64-emmc
uboot-mediatek: select matching U-Boot for board Instead of building all U-Boot variants by default, build only those needed by the selected board(s). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-14 19:07:00 +00:00
BUILD_DEVICES:=bananapi_bpi-r64
BUILD_SUBTARGET:=mt7622
uboot-mediatek: rework support for Bananapi BPi-R64 board Provide U-Boot variants for SD-card as well as eMMC boot, so we can generate whole-disk images for the device. While at it, rename 'mt7622' to 'mt7622-rfb1' to make it less confusing now that more boards are being added. Thanks to Frank Wunderlich (@frank-w) for making that nice SVG image explaining the MMC boot process[1] and for providing the necessary binary header blobs. [1]: https://github.com/frank-w/BPI-R64-ATF Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-02-27 15:14:02 +00:00
UBOOT_IMAGE:=u-boot.fip
BL2_BOOTDEV:=emmc
BL2_DDRBLOB:=2
DEPENDS:=+trusted-firmware-a-mt7622-emmc-2ddr
endef
define U-Boot/mt7622_bananapi_bpi-r64-sdmmc
NAME:=BananaPi R64 (SDMMC)
UBOOT_CONFIG:=mt7622_bananapi_bpi-r64-sdmmc
uboot-mediatek: select matching U-Boot for board Instead of building all U-Boot variants by default, build only those needed by the selected board(s). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-14 19:07:00 +00:00
BUILD_DEVICES:=bananapi_bpi-r64
BUILD_SUBTARGET:=mt7622
uboot-mediatek: rework support for Bananapi BPi-R64 board Provide U-Boot variants for SD-card as well as eMMC boot, so we can generate whole-disk images for the device. While at it, rename 'mt7622' to 'mt7622-rfb1' to make it less confusing now that more boards are being added. Thanks to Frank Wunderlich (@frank-w) for making that nice SVG image explaining the MMC boot process[1] and for providing the necessary binary header blobs. [1]: https://github.com/frank-w/BPI-R64-ATF Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-02-27 15:14:02 +00:00
UBOOT_IMAGE:=u-boot.fip
BL2_BOOTDEV:=sdmmc
BL2_DDRBLOB:=2
DEPENDS:=+trusted-firmware-a-mt7622-sdmmc-2ddr
endef
uboot-mediatek: add spi-nand build for bananapi bpi-r64 Some of bpi-r64 boards have serial NAND attached to SPI bus. Build U-Boot for booting from SPI-NAND. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
2021-04-11 15:59:09 +00:00
define U-Boot/mt7622_bananapi_bpi-r64-snand
NAME:=BananaPi R64 (SNAND)
UBOOT_CONFIG:=mt7622_bananapi_bpi-r64-snand
BUILD_DEVICES:=bananapi_bpi-r64
BUILD_SUBTARGET:=mt7622
UBOOT_IMAGE:=u-boot.fip
BL2_BOOTDEV:=snand
BL2_DDRBLOB:=2
DEPENDS:=+trusted-firmware-a-mt7622-snand-2ddr
endef
uboot-mediatek: add build for Ubiquiti Networks UniFi 6 LR Add U-Boot build for the Ubiquiti Networks UniFi 6 LR access point. This allows updating the bootchain to modern ARM Trusted Firmware 2.4 and U-Boot 2021.04 while keeping as much of the existing flash layout as possible (u-boot-env, factory and eeprom partitions are retained), gaining robust recovery vs. production dual-boot mechanism. Add info for the Winbond W25Q512JV SPI NOR flash used in the device and wait for GPIOs to settle after reset before checking for reset button. I2C connected LED controller is not supported yet. Writing large amounts of data to SPI flash currently doesn't work due to watchdog timeout causing reset before data write completes. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-04-02 11:05:15 +00:00
define U-Boot/mt7622_ubnt_unifi-6-lr
NAME:=Ubiquiti UniFi 6 LR
UBOOT_CONFIG:=mt7622_ubnt_unifi-6-lr
uboot-mediatek: update UniFi 6 LR board name Select matching U-Boot for both v1 and v2 variants. Fixes: 15a02471bb ("mediatek: new target mt7622-ubnt-unifi-6-lr-v1") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-06-16 18:55:02 +00:00
BUILD_DEVICES:=ubnt_unifi-6-lr-v1-ubootmod ubnt_unifi-6-lr-v2-ubootmod
uboot-mediatek: add build for Ubiquiti Networks UniFi 6 LR Add U-Boot build for the Ubiquiti Networks UniFi 6 LR access point. This allows updating the bootchain to modern ARM Trusted Firmware 2.4 and U-Boot 2021.04 while keeping as much of the existing flash layout as possible (u-boot-env, factory and eeprom partitions are retained), gaining robust recovery vs. production dual-boot mechanism. Add info for the Winbond W25Q512JV SPI NOR flash used in the device and wait for GPIOs to settle after reset before checking for reset button. I2C connected LED controller is not supported yet. Writing large amounts of data to SPI flash currently doesn't work due to watchdog timeout causing reset before data write completes. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-04-02 11:05:15 +00:00
BUILD_SUBTARGET:=mt7622
UBOOT_IMAGE:=u-boot.fip
BL2_BOOTDEV:=nor
BL2_DDRBLOB:=2
DEPENDS:=+trusted-firmware-a-mt7622-nor-2ddr
uboot-mediatek: add support for compressed BL3/FIP image MediaTek's ARM Trusted Firmware v2.7+ allows the images inside a FIP structure to be compressed. Make use of that for boards with NOR flash. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-13 20:06:36 +00:00
FIP_COMPRESS:=1
uboot-mediatek: add build for Ubiquiti Networks UniFi 6 LR Add U-Boot build for the Ubiquiti Networks UniFi 6 LR access point. This allows updating the bootchain to modern ARM Trusted Firmware 2.4 and U-Boot 2021.04 while keeping as much of the existing flash layout as possible (u-boot-env, factory and eeprom partitions are retained), gaining robust recovery vs. production dual-boot mechanism. Add info for the Winbond W25Q512JV SPI NOR flash used in the device and wait for GPIOs to settle after reset before checking for reset button. I2C connected LED controller is not supported yet. Writing large amounts of data to SPI flash currently doesn't work due to watchdog timeout causing reset before data write completes. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-04-02 11:05:15 +00:00
endef
mediatek: add U-Boot build for UniElec U7623 Patches submitted upstream at https://patchwork.ozlabs.org/project/uboot/list/?series=189178 Tested on Banana Pi R2 and U7623-06. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2020-07-13 09:37:28 +00:00
define U-Boot/mt7623a_unielec_u7623
NAME:=UniElec U7623 (mt7623)
uboot-mediatek: update build for the U7623-02 board Brings bootmenu and production/recovery dual-boot scheme like on the BPi-R2, BPi-R64, E8450 and UniFi 6 LR. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-08-20 20:12:28 +00:00
BUILD_DEVICES:=unielec_u7623-02
mediatek: add U-Boot build for UniElec U7623 Patches submitted upstream at https://patchwork.ozlabs.org/project/uboot/list/?series=189178 Tested on Banana Pi R2 and U7623-06. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2020-07-13 09:37:28 +00:00
BUILD_SUBTARGET:=mt7623
UBOOT_CONFIG:=mt7623a_unielec_u7623_02
endef
mediatek: add mt7623 u-boot build for Banana Pi R2 For building full SD/eMMC images for Banana Pi R2 we'll want a u-boot image built for that platform. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2020-06-11 18:32:12 +00:00
define U-Boot/mt7623n_bpir2
NAME:=Banana Pi R2 (mt7623)
uboot-mediatek: fix board name of Bananapi BPi-R2 As the board name was changed to be identical to the device tree compatible string (just like for other boards), also reflect that change for U-Boot. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-07-20 15:58:50 +00:00
BUILD_DEVICES:=bananapi_bpi-r2
mediatek: add mt7623 u-boot build for Banana Pi R2 For building full SD/eMMC images for Banana Pi R2 we'll want a u-boot image built for that platform. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2020-06-11 18:32:12 +00:00
BUILD_SUBTARGET:=mt7623
UBOOT_IMAGE:=u-boot.bin
UBOOT_CONFIG:=mt7623n_bpir2
endef
uboot-ramips: add support for MT7621, merge into uboot-mediatek * Merge uboot-ramips into uboot-mediatek. * Port support for the RAVPower RP WD009 to U-Boot 2022.07. * Add support for MT7621 and add builds for the reference boards. * Add builds for MT7620 and MT7628 reference boards. This should help to make development of U-Boot-level board support for all MediaTek targets much easier. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-11 20:15:32 +00:00
define U-Boot/mt7628_rfb
NAME:=MT7628 Reference Board
BUILD_DEVICES:=mediatek_mt7628an-eval-board
BUILD_TARGET:=ramips
BUILD_SUBTARGET:=mt76x8
UBOOT_CONFIG:=mt7628_rfb
UBOOT_IMAGE:=u-boot-with-spl.bin
endef
define U-Boot/ravpower_rp-wd009
NAME:=RAVPower RP-WD009
BUILD_TARGET:=ramips
BUILD_DEVICES:=ravpower_rp-wd009
BUILD_SUBTARGET:=mt76x8
UBOOT_CONFIG:=ravpower-rp-wd009-ram
UBOOT_IMAGE:=u-boot.bin
endef
uboot-mediatek: select matching U-Boot for board Instead of building all U-Boot variants by default, build only those needed by the selected board(s). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-14 19:07:00 +00:00
define U-Boot/mt7629_rfb
NAME:=MT7629 Reference Board
mediatek: add U-Boot build for UniElec U7623 Patches submitted upstream at https://patchwork.ozlabs.org/project/uboot/list/?series=189178 Tested on Banana Pi R2 and U7623-06. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2020-07-13 09:37:28 +00:00
BUILD_SUBTARGET:=mt7629
uboot-mediatek: select matching U-Boot for board Instead of building all U-Boot variants by default, build only those needed by the selected board(s). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-14 19:07:00 +00:00
BUILD_DEVICES:=mediatek_mt7629-rfb
mediatek: add U-Boot build for UniElec U7623 Patches submitted upstream at https://patchwork.ozlabs.org/project/uboot/list/?series=189178 Tested on Banana Pi R2 and U7623-06. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2020-07-13 09:37:28 +00:00
UBOOT_CONFIG:=mt7629_rfb
endef
uboot-mediatek: add support for MT798x platforms Import pending patches to support the upcoming Filogic platforms. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-12 02:41:30 +00:00
define U-Boot/mt7986_rfb
NAME:=MT7986 Reference Board
BUILD_SUBTARGET:=filogic
BUILD_DEVICES:=mediatek_mt7986-rfb
UBOOT_CONFIG:=mt7986_rfb
uboot-mediatek: add support for Bananapi BPi-R3 The Bananapi BPi-R3 board can boot from eMMC, SD card, SPI-NAND and SPI-NOR, depending on the position of switches controlling the BOOTSEL bootstrap pins as we as hard-wired chip-select lines. The position of the chip-select switch SW6 decides whether either SD card or eMMC can be accessed, SW5 selects either SPI-NAND or SPI-NOR. Generate U-Boot for all 4 boot options. The SD card version allows installation to SPI-NAND and SPI-NOR (eMMC cannot be accessed simultanously with the SD card), the SPI-NAND version allows installation to eMMC. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-13 03:29:34 +00:00
UBOOT_IMAGE:=u-boot.fip
BL2_BOOTDEV:=sdmmc
BL2_SOC:=mt7986
BL2_DDRTYPE:=ddr4
DEPENDS:=+trusted-firmware-a-mt7986-sdmmc-ddr4
endef
define U-Boot/mt7986_bananapi_bpi-r3-emmc
NAME:=BananaPi BPi-R3
BUILD_SUBTARGET:=filogic
BUILD_DEVICES:=bananapi_bpi-r3
UBOOT_CONFIG:=mt7986a_bpi-r3-emmc
UBOOT_IMAGE:=u-boot.fip
BL2_BOOTDEV:=emmc
BL2_SOC:=mt7986
BL2_DDRTYPE:=ddr4
DEPENDS:=+trusted-firmware-a-mt7986-emmc-ddr4
endef
define U-Boot/mt7986_bananapi_bpi-r3-sdmmc
NAME:=BananaPi BPi-R3
BUILD_SUBTARGET:=filogic
BUILD_DEVICES:=bananapi_bpi-r3
UBOOT_CONFIG:=mt7986a_bpi-r3-sd
UBOOT_IMAGE:=u-boot.fip
BL2_BOOTDEV:=sdmmc
BL2_SOC:=mt7986
BL2_DDRTYPE:=ddr4
DEPENDS:=+trusted-firmware-a-mt7986-sdmmc-ddr4
endef
define U-Boot/mt7986_bananapi_bpi-r3-snand
NAME:=BananaPi BPi-R3
BUILD_SUBTARGET:=filogic
BUILD_DEVICES:=bananapi_bpi-r3
UBOOT_CONFIG:=mt7986a_bpi-r3-snand
UBOOT_IMAGE:=u-boot.fip
BL2_BOOTDEV:=spim-nand
BL2_SOC:=mt7986
BL2_DDRTYPE:=ddr4
DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-ddr4
endef
define U-Boot/mt7986_bananapi_bpi-r3-nor
NAME:=BananaPi BPi-R3
BUILD_SUBTARGET:=filogic
BUILD_DEVICES:=bananapi_bpi-r3
UBOOT_CONFIG:=mt7986a_bpi-r3-nor
UBOOT_IMAGE:=u-boot.fip
BL2_BOOTDEV:=nor
BL2_SOC:=mt7986
BL2_DDRTYPE:=ddr4
DEPENDS:=+trusted-firmware-a-mt7986-nor-ddr4
FIP_COMPRESS:=1
uboot-mediatek: add support for MT798x platforms Import pending patches to support the upcoming Filogic platforms. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-12 02:41:30 +00:00
endef
uboot-mediatek: add support for Xiaomi Redmi Router AX6000 U-Boot flash instructions: 0. OpenWrt U-Boot does not support stock layout, it comes with recovery boot support, automatic tftp recovery and never blocks UART. A new flash layout is introduced, we call it OpenWrt U-Boot layout, stock flash layout and the old OpenWrt layout are not supported. During the whole flash procedure, please do not reboot or power off unless requested explicitly, or you will break your device. 1. Your device should already running OpenWrt. If not, follow the instructions to flash OpenWrt: https://github.com/openwrt/openwrt/pull/11115 2. Backup BL2 Nvram Bdata Factory and FIP in case you break something or in case you want to go back to stock firmware one day. cat /dev/mtdblock0 > /tmp/BL2.bin cat /dev/mtdblock1 > /tmp/Nvram.bin cat /dev/mtdblock2 > /tmp/Bdata.bin cat /dev/mtdblock3 > /tmp/Factory.bin cat /dev/mtdblock4 > /tmp/FIP.bin And save all whose bin files to somewhere safe. Then backup your configurations, since ubiformat for entire mtd device is required to create new ubootenv volume for OpenWrt U-Boot. 3. Run the following cmd to boot into an initramfs with the new OpenWrt U-Boot layout that expand ubi partion to the end of flash: ubiformat /dev/mtd7 -y -f /tmp/ax6000-ubootmod-initramfs-factory.ubi 4. After boot into initramfs, check mtd partion info. The ubi partion should be mtd5 root@OpenWrt:~# cat /proc/mtd dev: size erasesize name mtd0: 00100000 00020000 BL2 mtd1: 00040000 00020000 Nvram mtd2: 00040000 00020000 Bdata mtd3: 00200000 00020000 Factory mtd4: 00200000 00020000 FIP mtd5: 07a80000 00020000 ubi 5. Load kmod-mtd-rw to temporarily make the bootloader partions writable. The kmod-mtd-rw is from the feeds, it is not packed in initramfs-factory by default. To install kmod-mtd-rw via opkg: opkg update && opkg install kmod-mtd-rw Or, download kmod-mtd-rw.ipk from OpenWrt server and install it manually e.g: https://downloads.openwrt.org/snapshots/targets/mediatek/filogic/kmods/ Select your OpenWrt release version and kernel version accordingly. Load kmod-mtd-rw: insmod /lib/modules/$(uname -r)/mtd-rw.ko i_want_a_brick=1 6. Run the following cmd to clean all pending crash dumps in pstore, or OpenWrt U-Boot may boot into NAND recovery or tftp recovery. rm -f /sys/fs/pstore/* 7. Format ubi and create new ubootenv volume: ubidetach -p /dev/mtd5; ubiformat /dev/mtd5 -y; ubiattach -p /dev/mtd5 ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB 8. This is optional. Skip this if you do not want to have NAND recovery boot feature offered by OpenWrt U-Boot. Don't worry, you always have automatic tftp recovery feature enabled. ubimkvol /dev/ubi0 -n 2 -N recovery -s 10MiB ubiupdatevol /dev/ubi0_2 /tmp/ax6000-ubootmod-initramfs-recovery.itb 9. Now, flash new U-Boot. Bye-bye ugly stock U-Boot. mtd write /tmp/ax6000-ubootmod-preloader.bin BL2 mtd write /tmp/ax6000-ubootmod-bl31-uboot.fip FIP 10. Flash the squashfs-sysupgrade.bin as usual: sysupgrade -n /tmp/ax6000-ubootmod-squashfs-sysupgrade.itb Enjoy! Signed-off-by: Furong Xu <xfr@outlook.com>
2022-12-22 02:40:50 +00:00
define U-Boot/mt7986_xiaomi_redmi-router-ax6000
NAME:=Xiaomi Redmi AX6000
BUILD_SUBTARGET:=filogic
BUILD_DEVICES:=xiaomi_redmi-router-ax6000-ubootmod
UBOOT_CONFIG:=mt7986_xiaomi_redmi-ax6000
UBOOT_IMAGE:=u-boot.fip
BL2_BOOTDEV:=spim-nand
BL2_SOC:=mt7986
BL2_DDRTYPE:=ddr4
DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-ddr4
endef
uboot-mediatek: rework support for Bananapi BPi-R64 board Provide U-Boot variants for SD-card as well as eMMC boot, so we can generate whole-disk images for the device. While at it, rename 'mt7622' to 'mt7622-rfb1' to make it less confusing now that more boards are being added. Thanks to Frank Wunderlich (@frank-w) for making that nice SVG image explaining the MMC boot process[1] and for providing the necessary binary header blobs. [1]: https://github.com/frank-w/BPI-R64-ATF Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-02-27 15:14:02 +00:00
UBOOT_TARGETS := \
uboot-ramips: add support for MT7621, merge into uboot-mediatek * Merge uboot-ramips into uboot-mediatek. * Port support for the RAVPower RP WD009 to U-Boot 2022.07. * Add support for MT7621 and add builds for the reference boards. * Add builds for MT7620 and MT7628 reference boards. This should help to make development of U-Boot-level board support for all MediaTek targets much easier. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-11 20:15:32 +00:00
mt7620_mt7530_rfb \
mt7620_rfb \
mt7621_nand_rfb \
mt7621_rfb \
uboot-mediatek: rework support for Bananapi BPi-R64 board Provide U-Boot variants for SD-card as well as eMMC boot, so we can generate whole-disk images for the device. While at it, rename 'mt7622' to 'mt7622-rfb1' to make it less confusing now that more boards are being added. Thanks to Frank Wunderlich (@frank-w) for making that nice SVG image explaining the MMC boot process[1] and for providing the necessary binary header blobs. [1]: https://github.com/frank-w/BPI-R64-ATF Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-02-27 15:14:02 +00:00
mt7622_bananapi_bpi-r64-emmc \
mt7622_bananapi_bpi-r64-sdmmc \
uboot-mediatek: add spi-nand build for bananapi bpi-r64 Some of bpi-r64 boards have serial NAND attached to SPI bus. Build U-Boot for booting from SPI-NAND. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
2021-04-11 15:59:09 +00:00
mt7622_bananapi_bpi-r64-snand \
uboot-mediatek: rework support for Bananapi BPi-R64 board Provide U-Boot variants for SD-card as well as eMMC boot, so we can generate whole-disk images for the device. While at it, rename 'mt7622' to 'mt7622-rfb1' to make it less confusing now that more boards are being added. Thanks to Frank Wunderlich (@frank-w) for making that nice SVG image explaining the MMC boot process[1] and for providing the necessary binary header blobs. [1]: https://github.com/frank-w/BPI-R64-ATF Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-02-27 15:14:02 +00:00
mt7622_linksys_e8450 \
mt7622_rfb1 \
uboot-mediatek: add build for Ubiquiti Networks UniFi 6 LR Add U-Boot build for the Ubiquiti Networks UniFi 6 LR access point. This allows updating the bootchain to modern ARM Trusted Firmware 2.4 and U-Boot 2021.04 while keeping as much of the existing flash layout as possible (u-boot-env, factory and eeprom partitions are retained), gaining robust recovery vs. production dual-boot mechanism. Add info for the Winbond W25Q512JV SPI NOR flash used in the device and wait for GPIOs to settle after reset before checking for reset button. I2C connected LED controller is not supported yet. Writing large amounts of data to SPI flash currently doesn't work due to watchdog timeout causing reset before data write completes. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-04-02 11:05:15 +00:00
mt7622_ubnt_unifi-6-lr \
uboot-mediatek: rework support for Bananapi BPi-R64 board Provide U-Boot variants for SD-card as well as eMMC boot, so we can generate whole-disk images for the device. While at it, rename 'mt7622' to 'mt7622-rfb1' to make it less confusing now that more boards are being added. Thanks to Frank Wunderlich (@frank-w) for making that nice SVG image explaining the MMC boot process[1] and for providing the necessary binary header blobs. [1]: https://github.com/frank-w/BPI-R64-ATF Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-02-27 15:14:02 +00:00
mt7623n_bpir2 \
uboot-mediatek: select matching U-Boot for board Instead of building all U-Boot variants by default, build only those needed by the selected board(s). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-14 19:07:00 +00:00
mt7623a_unielec_u7623 \
uboot-ramips: add support for MT7621, merge into uboot-mediatek * Merge uboot-ramips into uboot-mediatek. * Port support for the RAVPower RP WD009 to U-Boot 2022.07. * Add support for MT7621 and add builds for the reference boards. * Add builds for MT7620 and MT7628 reference boards. This should help to make development of U-Boot-level board support for all MediaTek targets much easier. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-11 20:15:32 +00:00
mt7628_rfb \
ravpower_rp-wd009 \
uboot-mediatek: add support for MT798x platforms Import pending patches to support the upcoming Filogic platforms. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-12 02:41:30 +00:00
mt7629_rfb \
uboot-mediatek: add support for Bananapi BPi-R3 The Bananapi BPi-R3 board can boot from eMMC, SD card, SPI-NAND and SPI-NOR, depending on the position of switches controlling the BOOTSEL bootstrap pins as we as hard-wired chip-select lines. The position of the chip-select switch SW6 decides whether either SD card or eMMC can be accessed, SW5 selects either SPI-NAND or SPI-NOR. Generate U-Boot for all 4 boot options. The SD card version allows installation to SPI-NAND and SPI-NOR (eMMC cannot be accessed simultanously with the SD card), the SPI-NAND version allows installation to eMMC. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-13 03:29:34 +00:00
mt7986_bananapi_bpi-r3-emmc \
mt7986_bananapi_bpi-r3-sdmmc \
mt7986_bananapi_bpi-r3-snand \
mt7986_bananapi_bpi-r3-nor \
uboot-mediatek: add support for Xiaomi Redmi Router AX6000 U-Boot flash instructions: 0. OpenWrt U-Boot does not support stock layout, it comes with recovery boot support, automatic tftp recovery and never blocks UART. A new flash layout is introduced, we call it OpenWrt U-Boot layout, stock flash layout and the old OpenWrt layout are not supported. During the whole flash procedure, please do not reboot or power off unless requested explicitly, or you will break your device. 1. Your device should already running OpenWrt. If not, follow the instructions to flash OpenWrt: https://github.com/openwrt/openwrt/pull/11115 2. Backup BL2 Nvram Bdata Factory and FIP in case you break something or in case you want to go back to stock firmware one day. cat /dev/mtdblock0 > /tmp/BL2.bin cat /dev/mtdblock1 > /tmp/Nvram.bin cat /dev/mtdblock2 > /tmp/Bdata.bin cat /dev/mtdblock3 > /tmp/Factory.bin cat /dev/mtdblock4 > /tmp/FIP.bin And save all whose bin files to somewhere safe. Then backup your configurations, since ubiformat for entire mtd device is required to create new ubootenv volume for OpenWrt U-Boot. 3. Run the following cmd to boot into an initramfs with the new OpenWrt U-Boot layout that expand ubi partion to the end of flash: ubiformat /dev/mtd7 -y -f /tmp/ax6000-ubootmod-initramfs-factory.ubi 4. After boot into initramfs, check mtd partion info. The ubi partion should be mtd5 root@OpenWrt:~# cat /proc/mtd dev: size erasesize name mtd0: 00100000 00020000 BL2 mtd1: 00040000 00020000 Nvram mtd2: 00040000 00020000 Bdata mtd3: 00200000 00020000 Factory mtd4: 00200000 00020000 FIP mtd5: 07a80000 00020000 ubi 5. Load kmod-mtd-rw to temporarily make the bootloader partions writable. The kmod-mtd-rw is from the feeds, it is not packed in initramfs-factory by default. To install kmod-mtd-rw via opkg: opkg update && opkg install kmod-mtd-rw Or, download kmod-mtd-rw.ipk from OpenWrt server and install it manually e.g: https://downloads.openwrt.org/snapshots/targets/mediatek/filogic/kmods/ Select your OpenWrt release version and kernel version accordingly. Load kmod-mtd-rw: insmod /lib/modules/$(uname -r)/mtd-rw.ko i_want_a_brick=1 6. Run the following cmd to clean all pending crash dumps in pstore, or OpenWrt U-Boot may boot into NAND recovery or tftp recovery. rm -f /sys/fs/pstore/* 7. Format ubi and create new ubootenv volume: ubidetach -p /dev/mtd5; ubiformat /dev/mtd5 -y; ubiattach -p /dev/mtd5 ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB 8. This is optional. Skip this if you do not want to have NAND recovery boot feature offered by OpenWrt U-Boot. Don't worry, you always have automatic tftp recovery feature enabled. ubimkvol /dev/ubi0 -n 2 -N recovery -s 10MiB ubiupdatevol /dev/ubi0_2 /tmp/ax6000-ubootmod-initramfs-recovery.itb 9. Now, flash new U-Boot. Bye-bye ugly stock U-Boot. mtd write /tmp/ax6000-ubootmod-preloader.bin BL2 mtd write /tmp/ax6000-ubootmod-bl31-uboot.fip FIP 10. Flash the squashfs-sysupgrade.bin as usual: sysupgrade -n /tmp/ax6000-ubootmod-squashfs-sysupgrade.itb Enjoy! Signed-off-by: Furong Xu <xfr@outlook.com>
2022-12-22 02:40:50 +00:00
mt7986_xiaomi_redmi-router-ax6000 \
uboot-mediatek: add support for MT798x platforms Import pending patches to support the upcoming Filogic platforms. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-12 02:41:30 +00:00
mt7986_rfb
mediatek: add uboot Signed-off-by: John Crispin <john@phrozen.org>
2020-05-04 14:31:19 +00:00
uboot-ramips: add support for MT7621, merge into uboot-mediatek * Merge uboot-ramips into uboot-mediatek. * Port support for the RAVPower RP WD009 to U-Boot 2022.07. * Add support for MT7621 and add builds for the reference boards. * Add builds for MT7620 and MT7628 reference boards. This should help to make development of U-Boot-level board support for all MediaTek targets much easier. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-11 20:15:32 +00:00
ifdef CONFIG_TARGET_mediatek
uboot-mediatek: add support for Linksys E8450 Build U-Boot for the Linksys E8450 in order to have support for UBI. The loader has a default environment with scripts handling the reset button as well as fall-back to recovery firmware. If the loader comes up without a valid environment found in UBI, it will automatically make sure UBI is formatted and create a new environment and proceed to load recovery firmware (either from UBI or via TFTP if recovery is corrupted or unavailable). If the button is held down during power-on, the yellow status LED turns on and the bootloader environment is reset to factory defaults. If the button is released at this point, the recovery firmware (if existing) is loaded from UBI and booted. If the button is continously held down even beyond the point that the yellow LED turned on, the loader will try to load the recovery firmware via TFTP from server 192.168.1.254, write it to UBI and boot. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-01-30 13:58:16 +00:00
UBOOT_MAKE_FLAGS += $(UBOOT_IMAGE:.fip=.bin)
uboot-ramips: add support for MT7621, merge into uboot-mediatek * Merge uboot-ramips into uboot-mediatek. * Port support for the RAVPower RP WD009 to U-Boot 2022.07. * Add support for MT7621 and add builds for the reference boards. * Add builds for MT7620 and MT7628 reference boards. This should help to make development of U-Boot-level board support for all MediaTek targets much easier. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-11 20:15:32 +00:00
endif
mediatek: add uboot Signed-off-by: John Crispin <john@phrozen.org>
2020-05-04 14:31:19 +00:00
uboot-mediatek: add support for Linksys E8450 Build U-Boot for the Linksys E8450 in order to have support for UBI. The loader has a default environment with scripts handling the reset button as well as fall-back to recovery firmware. If the loader comes up without a valid environment found in UBI, it will automatically make sure UBI is formatted and create a new environment and proceed to load recovery firmware (either from UBI or via TFTP if recovery is corrupted or unavailable). If the button is held down during power-on, the yellow status LED turns on and the bootloader environment is reset to factory defaults. If the button is released at this point, the recovery firmware (if existing) is loaded from UBI and booted. If the button is continously held down even beyond the point that the yellow LED turned on, the loader will try to load the recovery firmware via TFTP from server 192.168.1.254, write it to UBI and boot. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-01-30 13:58:16 +00:00
define Build/fip-image
uboot-mediatek: add support for compressed BL3/FIP image MediaTek's ARM Trusted Firmware v2.7+ allows the images inside a FIP structure to be compressed. Make use of that for boards with NOR flash. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-13 20:06:36 +00:00
$(if $(FIP_COMPRESS),\
uboot-mediatek: add support for Bananapi BPi-R3 The Bananapi BPi-R3 board can boot from eMMC, SD card, SPI-NAND and SPI-NOR, depending on the position of switches controlling the BOOTSEL bootstrap pins as we as hard-wired chip-select lines. The position of the chip-select switch SW6 decides whether either SD card or eMMC can be accessed, SW5 selects either SPI-NAND or SPI-NOR. Generate U-Boot for all 4 boot options. The SD card version allows installation to SPI-NAND and SPI-NOR (eMMC cannot be accessed simultanously with the SD card), the SPI-NAND version allows installation to eMMC. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-13 03:29:34 +00:00
xz -f -e -k -9 -C crc32 $(STAGING_DIR_IMAGE)/$(if $(BL2_SOC),$(BL2_SOC),$(BUILD_SUBTARGET))-$(BL2_BOOTDEV)-$(if $(BL2_DDRTYPE),$(BL2_DDRTYPE)-)$(if $(BL2_DDRBLOB),$(BL2_DDRBLOB)ddr-)bl31.bin ;\
uboot-mediatek: add support for compressed BL3/FIP image MediaTek's ARM Trusted Firmware v2.7+ allows the images inside a FIP structure to be compressed. Make use of that for boards with NOR flash. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-13 20:06:36 +00:00
xz -f -e -k -9 -C crc32 $(PKG_BUILD_DIR)/u-boot.bin \
)
uboot-mediatek: add support for Linksys E8450 Build U-Boot for the Linksys E8450 in order to have support for UBI. The loader has a default environment with scripts handling the reset button as well as fall-back to recovery firmware. If the loader comes up without a valid environment found in UBI, it will automatically make sure UBI is formatted and create a new environment and proceed to load recovery firmware (either from UBI or via TFTP if recovery is corrupted or unavailable). If the button is held down during power-on, the yellow status LED turns on and the bootloader environment is reset to factory defaults. If the button is released at this point, the recovery firmware (if existing) is loaded from UBI and booted. If the button is continously held down even beyond the point that the yellow LED turned on, the loader will try to load the recovery firmware via TFTP from server 192.168.1.254, write it to UBI and boot. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-01-30 13:58:16 +00:00
$(STAGING_DIR_HOST)/bin/fiptool create \
uboot-mediatek: add support for Bananapi BPi-R3 The Bananapi BPi-R3 board can boot from eMMC, SD card, SPI-NAND and SPI-NOR, depending on the position of switches controlling the BOOTSEL bootstrap pins as we as hard-wired chip-select lines. The position of the chip-select switch SW6 decides whether either SD card or eMMC can be accessed, SW5 selects either SPI-NAND or SPI-NOR. Generate U-Boot for all 4 boot options. The SD card version allows installation to SPI-NAND and SPI-NOR (eMMC cannot be accessed simultanously with the SD card), the SPI-NAND version allows installation to eMMC. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-13 03:29:34 +00:00
--soc-fw $(STAGING_DIR_IMAGE)/$(if $(BL2_SOC),$(BL2_SOC),$(BUILD_SUBTARGET))-$(BL2_BOOTDEV)-$(if $(BL2_DDRTYPE),$(BL2_DDRTYPE)-)$(if $(BL2_DDRBLOB),$(BL2_DDRBLOB)ddr-)bl31.bin$(if $(FIP_COMPRESS),.xz) \
uboot-mediatek: add support for compressed BL3/FIP image MediaTek's ARM Trusted Firmware v2.7+ allows the images inside a FIP structure to be compressed. Make use of that for boards with NOR flash. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-13 20:06:36 +00:00
--nt-fw $(PKG_BUILD_DIR)/u-boot.bin$(if $(FIP_COMPRESS),.xz) \
uboot-mediatek: add support for Linksys E8450 Build U-Boot for the Linksys E8450 in order to have support for UBI. The loader has a default environment with scripts handling the reset button as well as fall-back to recovery firmware. If the loader comes up without a valid environment found in UBI, it will automatically make sure UBI is formatted and create a new environment and proceed to load recovery firmware (either from UBI or via TFTP if recovery is corrupted or unavailable). If the button is held down during power-on, the yellow status LED turns on and the bootloader environment is reset to factory defaults. If the button is released at this point, the recovery firmware (if existing) is loaded from UBI and booted. If the button is continously held down even beyond the point that the yellow LED turned on, the loader will try to load the recovery firmware via TFTP from server 192.168.1.254, write it to UBI and boot. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-01-30 13:58:16 +00:00
$(PKG_BUILD_DIR)/u-boot.fip
endef
uboot-ramips: add support for MT7621, merge into uboot-mediatek * Merge uboot-ramips into uboot-mediatek. * Port support for the RAVPower RP WD009 to U-Boot 2022.07. * Add support for MT7621 and add builds for the reference boards. * Add builds for MT7620 and MT7628 reference boards. This should help to make development of U-Boot-level board support for all MediaTek targets much easier. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-11 20:15:32 +00:00
ifdef CONFIG_TARGET_ramips_mt7621
define Build/Prepare
$(call Build/Prepare/Default)
uboot-mediatek: mt7621: use silent stage1 by default Use faster and silent MT7621 stage1 blob by default unless CONFIG_DEBUG is selected. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-08-09 23:23:34 +00:00
ifdef CONFIG_DEBUG
uboot-ramips: add support for MT7621, merge into uboot-mediatek * Merge uboot-ramips into uboot-mediatek. * Port support for the RAVPower RP WD009 to U-Boot 2022.07. * Add support for MT7621 and add builds for the reference boards. * Add builds for MT7620 and MT7628 reference boards. This should help to make development of U-Boot-level board support for all MediaTek targets much easier. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-11 20:15:32 +00:00
$(CP) $(DL_DIR)/mt7621_stage_sram.bin $(PKG_BUILD_DIR)/
uboot-mediatek: mt7621: use silent stage1 by default Use faster and silent MT7621 stage1 blob by default unless CONFIG_DEBUG is selected. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-08-09 23:23:34 +00:00
else
$(CP) $(DL_DIR)/mt7621_stage_sram_noprint.bin $(PKG_BUILD_DIR)/mt7621_stage_sram.bin
endif
uboot-ramips: add support for MT7621, merge into uboot-mediatek * Merge uboot-ramips into uboot-mediatek. * Port support for the RAVPower RP WD009 to U-Boot 2022.07. * Add support for MT7621 and add builds for the reference boards. * Add builds for MT7620 and MT7628 reference boards. This should help to make development of U-Boot-level board support for all MediaTek targets much easier. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-11 20:15:32 +00:00
endef
endif
uboot-mediatek: update to 2021.10 U-Boot 2021.10 has been released. Rebase mediatek patches on top of new release and remove some patches which have been merged upstream. Tested on Bananapi BPi-R2 (mt7623), Bananapi BPi-R64 (mt7622) and Linksys E8450 (mt7622). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-08-19 02:57:00 +00:00
define Build/Configure
$(call Build/Configure/U-Boot)
sed -i 's/CONFIG_TOOLS_LIBCRYPTO=y/# CONFIG_TOOLS_LIBCRYPTO is not set/' $(PKG_BUILD_DIR)/.config
endef
uboot-mediatek: add support for Linksys E8450 Build U-Boot for the Linksys E8450 in order to have support for UBI. The loader has a default environment with scripts handling the reset button as well as fall-back to recovery firmware. If the loader comes up without a valid environment found in UBI, it will automatically make sure UBI is formatted and create a new environment and proceed to load recovery firmware (either from UBI or via TFTP if recovery is corrupted or unavailable). If the button is held down during power-on, the yellow status LED turns on and the bootloader environment is reset to factory defaults. If the button is released at this point, the recovery firmware (if existing) is loaded from UBI and booted. If the button is continously held down even beyond the point that the yellow LED turned on, the loader will try to load the recovery firmware via TFTP from server 192.168.1.254, write it to UBI and boot. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-01-30 13:58:16 +00:00
define Build/Compile
$(call Build/Compile/U-Boot)
uboot-mediatek: fix extraneous right parens Fixes following warning: Makefile:310: extraneous text after 'ifeq' directive Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-09-13 07:06:50 +00:00
ifeq ($(UBOOT_IMAGE),u-boot.fip)
uboot-mediatek: add support for Linksys E8450 Build U-Boot for the Linksys E8450 in order to have support for UBI. The loader has a default environment with scripts handling the reset button as well as fall-back to recovery firmware. If the loader comes up without a valid environment found in UBI, it will automatically make sure UBI is formatted and create a new environment and proceed to load recovery firmware (either from UBI or via TFTP if recovery is corrupted or unavailable). If the button is held down during power-on, the yellow status LED turns on and the bootloader environment is reset to factory defaults. If the button is released at this point, the recovery firmware (if existing) is loaded from UBI and booted. If the button is continously held down even beyond the point that the yellow LED turned on, the loader will try to load the recovery firmware via TFTP from server 192.168.1.254, write it to UBI and boot. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-01-30 13:58:16 +00:00
$(call Build/fip-image)
endif
endef
# don't stage files to bindir, let target/linux/mediatek/image/*.mk do that
uboot-ramips: add support for MT7621, merge into uboot-mediatek * Merge uboot-ramips into uboot-mediatek. * Port support for the RAVPower RP WD009 to U-Boot 2022.07. * Add support for MT7621 and add builds for the reference boards. * Add builds for MT7620 and MT7628 reference boards. This should help to make development of U-Boot-level board support for all MediaTek targets much easier. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-11 20:15:32 +00:00
ifdef CONFIG_TARGET_mediatek
uboot-mediatek: add support for Linksys E8450 Build U-Boot for the Linksys E8450 in order to have support for UBI. The loader has a default environment with scripts handling the reset button as well as fall-back to recovery firmware. If the loader comes up without a valid environment found in UBI, it will automatically make sure UBI is formatted and create a new environment and proceed to load recovery firmware (either from UBI or via TFTP if recovery is corrupted or unavailable). If the button is held down during power-on, the yellow status LED turns on and the bootloader environment is reset to factory defaults. If the button is released at this point, the recovery firmware (if existing) is loaded from UBI and booted. If the button is continously held down even beyond the point that the yellow LED turned on, the loader will try to load the recovery firmware via TFTP from server 192.168.1.254, write it to UBI and boot. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-01-30 13:58:16 +00:00
define Package/u-boot/install
endef
uboot-ramips: add support for MT7621, merge into uboot-mediatek * Merge uboot-ramips into uboot-mediatek. * Port support for the RAVPower RP WD009 to U-Boot 2022.07. * Add support for MT7621 and add builds for the reference boards. * Add builds for MT7620 and MT7628 reference boards. This should help to make development of U-Boot-level board support for all MediaTek targets much easier. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-07-11 20:15:32 +00:00
endif
uboot-mediatek: add support for Linksys E8450 Build U-Boot for the Linksys E8450 in order to have support for UBI. The loader has a default environment with scripts handling the reset button as well as fall-back to recovery firmware. If the loader comes up without a valid environment found in UBI, it will automatically make sure UBI is formatted and create a new environment and proceed to load recovery firmware (either from UBI or via TFTP if recovery is corrupted or unavailable). If the button is held down during power-on, the yellow status LED turns on and the bootloader environment is reset to factory defaults. If the button is released at this point, the recovery firmware (if existing) is loaded from UBI and booted. If the button is continously held down even beyond the point that the yellow LED turned on, the loader will try to load the recovery firmware via TFTP from server 192.168.1.254, write it to UBI and boot. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-01-30 13:58:16 +00:00
mediatek: add uboot Signed-off-by: John Crispin <john@phrozen.org>
2020-05-04 14:31:19 +00:00
define Build/InstallDev
$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
uboot-mediatek: add support for Linksys E8450 Build U-Boot for the Linksys E8450 in order to have support for UBI. The loader has a default environment with scripts handling the reset button as well as fall-back to recovery firmware. If the loader comes up without a valid environment found in UBI, it will automatically make sure UBI is formatted and create a new environment and proceed to load recovery firmware (either from UBI or via TFTP if recovery is corrupted or unavailable). If the button is held down during power-on, the yellow status LED turns on and the bootloader environment is reset to factory defaults. If the button is released at this point, the recovery firmware (if existing) is loaded from UBI and booted. If the button is continously held down even beyond the point that the yellow LED turned on, the loader will try to load the recovery firmware via TFTP from server 192.168.1.254, write it to UBI and boot. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-01-30 13:58:16 +00:00
$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(UBOOT_IMAGE) $(STAGING_DIR_IMAGE)/$(BUILD_VARIANT)-$(UBOOT_IMAGE)
mediatek: add uboot Signed-off-by: John Crispin <john@phrozen.org>
2020-05-04 14:31:19 +00:00
endef
$(eval $(call BuildPackage/U-Boot))
Reference in New Issue Copy Permalink