openwrt/package/base-files/Makefile

229 lines
6.9 KiB
Makefile
Raw Normal View History

#
# Copyright (C) 2007-2021 OpenWrt.org
# Copyright (C) 2010 Vertical Communications
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
include $(INCLUDE_DIR)/version.mk
include $(INCLUDE_DIR)/feeds.mk
PKG_NAME:=base-files
PKG_FLAGS:=nonshared
PKG_RELEASE:=$(COMMITCOUNT)
PKG_FILE_DEPENDS:=$(PLATFORM_DIR)/ $(GENERIC_PLATFORM_DIR)/base-files/
PKG_BUILD_DEPENDS:=usign/host ucert/host
PKG_LICENSE:=GPL-2.0
# Extend depends from version.mk
PKG_CONFIG_DEPENDS += \
CONFIG_SIGNED_PACKAGES CONFIG_TARGET_INIT_PATH CONFIG_TARGET_PREINIT_DISABLE_FAILSAFE \
CONFIG_NAND_SUPPORT \
base-files: rename 'sdcard' to 'legacy-sdcard' While an image layout based on MBR and 'bootfs' partition may be easy to understand for users who are very used to the IBM PC and always have the option to access the SD card outside of the device (and hence don't really depend on other recovery methods or dual-boot), in my opinion it's a dead end for many desirable features on embedded systems, especially when managed remotely (and hence without an easy option to access the SD card using another device in case things go wrong, for example). Let me explain: * using a MSDOS/VFAT filesystem to store kernel(s) is problematic, as a single corruption of the bootfs can render the system into a state that it no longer boots at all. This makes dual-boot useless, or at least very tedious to setup with then 2 independent boot partitions to avoid the single point of failure on a "hot" block (the FAT index of the boot partition, written every time a file is changed in bootfs). And well: most targets even store the bootloader environment in a file in that very same FAT filesystem, hence it cannot be used to script a reliable dual-boot method (as loading the environment itself will already fail if the filesystem is corrupted). * loading the kernel uImage from bootfs and using rootfs inside an additional partition means the bootloader can only validate the kernel -- if rootfs is broken or corrupted, this can lead to a reboot loop, which is often a quite costly thing to happen in terms of hardware lifetime. * imitating MBR-boot behavior with a FAT-formatted bootfs partition (like IBM PC in the 80s and 90s) is just one of many choices on embedded targets. There are much better options with modern U-Boot (which is what we use and build from source for all targets booting off SD cards), see examples in mediatek/mt7622 and mediatek/mt7623. Hence rename the 'sdcard' feature to 'legacy-sdcard', and prefix functions with 'legacy_sdcard_' instead of 'sdcard_'. Tested-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-08-07 13:30:53 +00:00
CONFIG_LEGACY_SDCARD_SUPPORT \
CONFIG_CLEAN_IPKG \
CONFIG_PER_FEED_REPO \
$(foreach feed,$(FEEDS_AVAILABLE),CONFIG_FEED_$(feed))
include $(INCLUDE_DIR)/package.mk
ifneq ($(DUMP),1)
STAMP_CONFIGURED:=$(strip $(STAMP_CONFIGURED))_$(shell echo $(CONFIG_TARGET_INIT_PATH) | $(MKHASH) md5)
TARGET:=-$(BOARD)
endif
define Package/base-files
SECTION:=base
CATEGORY:=Base system
DEPENDS:=+netifd +libc +jsonfilter +SIGNED_PACKAGES:usign +SIGNED_PACKAGES:openwrt-keyring +NAND_SUPPORT:ubi-utils +fstools +fwtool
TITLE:=Base filesystem for OpenWrt
URL:=http://openwrt.org/
VERSION:=$(PKG_RELEASE)-$(REVISION)
endef
define Package/base-files/conffiles
/etc/config/
/etc/config/network
/etc/config/system
/etc/dropbear/
/etc/ethers
/etc/group
/etc/hosts
/etc/inittab
/etc/iproute2/rt_protos
/etc/iproute2/rt_tables
/etc/passwd
/etc/profile
/etc/profile.d
/etc/protocols
/etc/rc.local
/etc/services
/etc/shadow
/etc/shells
/etc/shinit
/etc/sysctl.conf
/etc/sysupgrade.conf
$(call $(TARGET)/conffiles)
endef
define Package/base-files/description
This package contains a base filesystem and system scripts for OpenWrt.
endef
define ImageConfigOptions
mkdir -p $(1)/lib/preinit
echo 'pi_suppress_stderr="$(CONFIG_TARGET_PREINIT_SUPPRESS_STDERR)"' >$(1)/lib/preinit/00_preinit.conf
echo 'fs_failsafe_wait_timeout=$(if $(CONFIG_TARGET_PREINIT_TIMEOUT),$(CONFIG_TARGET_PREINIT_TIMEOUT),2)' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_init_path="$(TARGET_INIT_PATH)"' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_init_env=$(if $(CONFIG_TARGET_INIT_ENV),$(CONFIG_TARGET_INIT_ENV),"")' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_init_cmd=$(if $(CONFIG_TARGET_INIT_CMD),$(CONFIG_TARGET_INIT_CMD),"/sbin/init")' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_init_suppress_stderr="$(CONFIG_TARGET_INIT_SUPPRESS_STDERR)"' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_ifname=$(if $(CONFIG_TARGET_PREINIT_IFNAME),$(CONFIG_TARGET_PREINIT_IFNAME),"")' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_ip=$(if $(CONFIG_TARGET_PREINIT_IP),$(CONFIG_TARGET_PREINIT_IP),"192.168.1.1")' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_netmask=$(if $(CONFIG_TARGET_PREINIT_NETMASK),$(CONFIG_TARGET_PREINIT_NETMASK),"255.255.255.0")' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_broadcast=$(if $(CONFIG_TARGET_PREINIT_BROADCAST),$(CONFIG_TARGET_PREINIT_BROADCAST),"192.168.1.255")' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_preinit_net_messages="$(CONFIG_TARGET_PREINIT_SHOW_NETMSG)"' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_preinit_no_failsafe_netmsg="$(CONFIG_TARGET_PREINIT_SUPPRESS_FAILSAFE_NETMSG)"' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_preinit_no_failsafe="$(CONFIG_TARGET_PREINIT_DISABLE_FAILSAFE)"' >>$(1)/lib/preinit/00_preinit.conf
endef
define Build/Prepare
mkdir -p $(PKG_BUILD_DIR)
endef
define Build/Compile/Default
endef
Build/Compile = $(Build/Compile/Default)
ifdef CONFIG_SIGNED_PACKAGES
define Build/Configure
[ -s $(BUILD_KEY) -a -s $(BUILD_KEY).pub ] || \
$(STAGING_DIR_HOST)/bin/usign -G -s $(BUILD_KEY) -p $(BUILD_KEY).pub -c "Local build key"
[ -s $(BUILD_KEY).ucert ] || \
$(STAGING_DIR_HOST)/bin/ucert -I -c $(BUILD_KEY).ucert -p $(BUILD_KEY).pub -s $(BUILD_KEY)
endef
ifndef CONFIG_BUILDBOT
define Package/base-files/install-key
mkdir -p $(1)/etc/opkg/keys
$(CP) $(BUILD_KEY).pub $(1)/etc/opkg/keys/`$(STAGING_DIR_HOST)/bin/usign -F -p $(BUILD_KEY).pub`
endef
endif
endif
ifeq ($(CONFIG_NAND_SUPPORT),)
define Package/base-files/nand-support
rm -f $(1)/lib/upgrade/nand.sh
endef
endif
base-files: rename 'sdcard' to 'legacy-sdcard' While an image layout based on MBR and 'bootfs' partition may be easy to understand for users who are very used to the IBM PC and always have the option to access the SD card outside of the device (and hence don't really depend on other recovery methods or dual-boot), in my opinion it's a dead end for many desirable features on embedded systems, especially when managed remotely (and hence without an easy option to access the SD card using another device in case things go wrong, for example). Let me explain: * using a MSDOS/VFAT filesystem to store kernel(s) is problematic, as a single corruption of the bootfs can render the system into a state that it no longer boots at all. This makes dual-boot useless, or at least very tedious to setup with then 2 independent boot partitions to avoid the single point of failure on a "hot" block (the FAT index of the boot partition, written every time a file is changed in bootfs). And well: most targets even store the bootloader environment in a file in that very same FAT filesystem, hence it cannot be used to script a reliable dual-boot method (as loading the environment itself will already fail if the filesystem is corrupted). * loading the kernel uImage from bootfs and using rootfs inside an additional partition means the bootloader can only validate the kernel -- if rootfs is broken or corrupted, this can lead to a reboot loop, which is often a quite costly thing to happen in terms of hardware lifetime. * imitating MBR-boot behavior with a FAT-formatted bootfs partition (like IBM PC in the 80s and 90s) is just one of many choices on embedded targets. There are much better options with modern U-Boot (which is what we use and build from source for all targets booting off SD cards), see examples in mediatek/mt7622 and mediatek/mt7623. Hence rename the 'sdcard' feature to 'legacy-sdcard', and prefix functions with 'legacy_sdcard_' instead of 'sdcard_'. Tested-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-08-07 13:30:53 +00:00
ifeq ($(CONFIG_LEGACY_SDCARD_SUPPORT),)
define Package/base-files/legacy-sdcard-support
rm -f $(1)/lib/upgrade/legacy-sdcard.sh
endef
endif
define Package/base-files/install
$(CP) ./files/* $(1)/
$(Package/base-files/install-key)
$(Package/base-files/nand-support)
base-files: rename 'sdcard' to 'legacy-sdcard' While an image layout based on MBR and 'bootfs' partition may be easy to understand for users who are very used to the IBM PC and always have the option to access the SD card outside of the device (and hence don't really depend on other recovery methods or dual-boot), in my opinion it's a dead end for many desirable features on embedded systems, especially when managed remotely (and hence without an easy option to access the SD card using another device in case things go wrong, for example). Let me explain: * using a MSDOS/VFAT filesystem to store kernel(s) is problematic, as a single corruption of the bootfs can render the system into a state that it no longer boots at all. This makes dual-boot useless, or at least very tedious to setup with then 2 independent boot partitions to avoid the single point of failure on a "hot" block (the FAT index of the boot partition, written every time a file is changed in bootfs). And well: most targets even store the bootloader environment in a file in that very same FAT filesystem, hence it cannot be used to script a reliable dual-boot method (as loading the environment itself will already fail if the filesystem is corrupted). * loading the kernel uImage from bootfs and using rootfs inside an additional partition means the bootloader can only validate the kernel -- if rootfs is broken or corrupted, this can lead to a reboot loop, which is often a quite costly thing to happen in terms of hardware lifetime. * imitating MBR-boot behavior with a FAT-formatted bootfs partition (like IBM PC in the 80s and 90s) is just one of many choices on embedded targets. There are much better options with modern U-Boot (which is what we use and build from source for all targets booting off SD cards), see examples in mediatek/mt7622 and mediatek/mt7623. Hence rename the 'sdcard' feature to 'legacy-sdcard', and prefix functions with 'legacy_sdcard_' instead of 'sdcard_'. Tested-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-08-07 13:30:53 +00:00
$(Package/base-files/legacy-sdcard-support)
if [ -d $(GENERIC_PLATFORM_DIR)/base-files/. ]; then \
$(CP) $(GENERIC_PLATFORM_DIR)/base-files/* $(1)/; \
fi
if [ -d $(PLATFORM_DIR)/base-files/. ]; then \
$(CP) $(PLATFORM_DIR)/base-files/* $(1)/; \
fi
$(if $(filter-out $(PLATFORM_DIR),$(PLATFORM_SUBDIR)), \
if [ -d $(PLATFORM_SUBDIR)/base-files/. ]; then \
$(CP) $(PLATFORM_SUBDIR)/base-files/* $(1)/; \
2007-12-23 02:13:57 +00:00
fi; \
)
$(VERSION_SED_SCRIPT) \
include, base-files, opkg: introduce version configuration to override the embedded version info of generated images - Introduce new Kconfig symbols VERSION_DIST, VERSION_NICK, VERSION_NUMBER and VERSION_REPO to specify distribution, release name, version and repository for a given build - Introduce include/version.mk to provide common helpers for packages dealing with versions - Make opkg use version.mk to populate the opkg.conf template - Make base-files use version.mk to populate /etc/openwrt_version, /etc/openwrt_release and /etc/banner The available placeholders are: %D .. Replace with $(CONFIG_VERSION_DIST), default to "OpenWrt" %d .. Like %D, but all characters made lowercase and spaces substituted with "_" (e.g. "openwrt") %N .. Replace with $(CONFIG_VERSION_NICK), default to the build tree release (e.g. "Attitude Adjustment") %n .. Like %N, but all characters made lowercase and spaces substituted with "_" (e.g. "attitude_adjustment") %V .. Replace with $(CONFIG_VERSION_NUMBER), default to the build tree release (e.g. "r31262") %v .. Like %V, but all characters made lowercase and spaces substituted with "_" %C .. Replace with $(CONFIG_VERSION_NUMBER), default to "Bleeding Edge" %c .. Like %C, but all characters made lowercase and spaces substituted with "_" (e.g. "bleeding_edge") %U .. Replace with $(CONFIG_VERSION_REPO), default to "http://downloads.openwrt.org/snapshots/trunk/%T/packages" %R .. Replace with the current build tree revision (e.g. "r31262" or "75488c4a05b8033cf69e91874a61852db7ba9c6c") %T .. Replace with the current target (e.g. "ar71xx") %S .. Replace with the current target/subtarget combo (e.g. "adm5120/router_le") SVN-Revision: 31262
2012-04-12 17:31:16 +00:00
$(1)/etc/banner \
$(1)/etc/openwrt_version \
$(1)/usr/lib/os-release
$(VERSION_SED_SCRIPT) \
$(1)/etc/openwrt_release \
$(1)/etc/device_info \
$(1)/usr/lib/os-release
include, base-files, opkg: introduce version configuration to override the embedded version info of generated images - Introduce new Kconfig symbols VERSION_DIST, VERSION_NICK, VERSION_NUMBER and VERSION_REPO to specify distribution, release name, version and repository for a given build - Introduce include/version.mk to provide common helpers for packages dealing with versions - Make opkg use version.mk to populate the opkg.conf template - Make base-files use version.mk to populate /etc/openwrt_version, /etc/openwrt_release and /etc/banner The available placeholders are: %D .. Replace with $(CONFIG_VERSION_DIST), default to "OpenWrt" %d .. Like %D, but all characters made lowercase and spaces substituted with "_" (e.g. "openwrt") %N .. Replace with $(CONFIG_VERSION_NICK), default to the build tree release (e.g. "Attitude Adjustment") %n .. Like %N, but all characters made lowercase and spaces substituted with "_" (e.g. "attitude_adjustment") %V .. Replace with $(CONFIG_VERSION_NUMBER), default to the build tree release (e.g. "r31262") %v .. Like %V, but all characters made lowercase and spaces substituted with "_" %C .. Replace with $(CONFIG_VERSION_NUMBER), default to "Bleeding Edge" %c .. Like %C, but all characters made lowercase and spaces substituted with "_" (e.g. "bleeding_edge") %U .. Replace with $(CONFIG_VERSION_REPO), default to "http://downloads.openwrt.org/snapshots/trunk/%T/packages" %R .. Replace with the current build tree revision (e.g. "r31262" or "75488c4a05b8033cf69e91874a61852db7ba9c6c") %T .. Replace with the current target (e.g. "ar71xx") %S .. Replace with the current target/subtarget combo (e.g. "adm5120/router_le") SVN-Revision: 31262
2012-04-12 17:31:16 +00:00
$(SED) "s#%PATH%#$(TARGET_INIT_PATH)#g" \
$(1)/sbin/hotplug-call \
$(1)/etc/preinit \
$(1)/etc/profile
mkdir -p $(1)/CONTROL
mkdir -p $(1)/dev
mkdir -p $(1)/etc/config
mkdir -p $(1)/etc/crontabs
mkdir -p $(1)/etc/rc.d
mkdir -p $(1)/overlay
mkdir -p $(1)/lib/firmware
$(if $(LIB_SUFFIX),-$(LN) lib $(1)/lib$(LIB_SUFFIX))
mkdir -p $(1)/mnt
mkdir -p $(1)/proc
mkdir -p $(1)/tmp
mkdir -p $(1)/usr/lib
$(if $(LIB_SUFFIX),-$(LN) lib $(1)/usr/lib$(LIB_SUFFIX))
mkdir -p $(1)/usr/bin
mkdir -p $(1)/sys
mkdir -p $(1)/www
mkdir -p $(1)/root
$(LN) /proc/mounts $(1)/etc/mtab
ifeq ($(CONFIG_TARGET_ROOTFS_PERSIST_VAR),n)
rm -f $(1)/var
$(LN) tmp $(1)/var
else
mkdir -p $(1)/var
$(LN) /tmp/run $(1)/var/run
endif
mkdir -p $(1)/etc
$(LN) /tmp/resolv.conf /tmp/TZ /tmp/localtime $(1)/etc/
chmod 0600 $(1)/etc/shadow
chmod 1777 $(1)/tmp
$(call ImageConfigOptions,$(1))
$(call Package/base-files/install-target,$(1))
for conffile in $(1)/etc/config/*; do \
if [ -f "$$$$conffile" ]; then \
grep "$$$${conffile##$(1)}" $(1)/CONTROL/conffiles || \
echo "$$$${conffile##$(1)}" >> $(1)/CONTROL/conffiles; \
fi \
done
$(if $(CONFIG_INCLUDE_CONFIG), \
echo -e "# Build configuration for board $(BOARD)/$(SUBTARGET)/$(PROFILE)\n" >$(1)/etc/build.config; \
cat $(BIN_DIR)/config.buildinfo >>$(1)/etc/build.config; \
cat $(BIN_DIR)/feeds.buildinfo >>$(1)/etc/build.feeds; \
cat $(BIN_DIR)/version.buildinfo >>$(1)/etc/build.version)
$(if $(CONFIG_CLEAN_IPKG),, \
mkdir -p $(1)/etc/opkg; \
$(call FeedSourcesAppend,$(1)/etc/opkg/distfeeds.conf); \
$(VERSION_SED_SCRIPT) $(1)/etc/opkg/distfeeds.conf)
$(if $(CONFIG_IPK_FILES_CHECKSUMS),, \
rm -f $(1)/sbin/pkg_check)
$(if $(CONFIG_TARGET_PREINIT_DISABLE_FAILSAFE), \
rm -f $(1)/etc/banner.failsafe,)
endef
ifneq ($(DUMP),1)
-include $(PLATFORM_DIR)/base-files.mk
-include $(PLATFORM_SUBDIR)/base-files.mk
endif
$(eval $(call BuildPackage,base-files))