openwrt/target/linux/layerscape/patches-4.4/3022-dt-move-guts-devicetree-doc-out-of-powerpc-directory.patch

From 0e9d79db770196e94869650d7c4d13ea23937138 Mon Sep 17 00:00:00 2001
From: Yangbo Lu <yangbo.lu@nxp.com>
Date: Mon, 25 Jan 2016 14:27:27 +0800
Subject: [PATCH 22/70] dt: move guts devicetree doc out of powerpc directory

Move guts devicetree doc to Documentation/devicetree/bindings/soc/fsl/
since it's used by not only PowerPC but also ARM. And add a specification
for 'little-endian' property.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
---
 .../devicetree/bindings/powerpc/fsl/guts.txt       |   41 ------------------
 Documentation/devicetree/bindings/soc/fsl/guts.txt |   44 ++++++++++++++++++++
 2 files changed, 44 insertions(+), 41 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/powerpc/fsl/guts.txt
 create mode 100644 Documentation/devicetree/bindings/soc/fsl/guts.txt

--- a/Documentation/devicetree/bindings/powerpc/fsl/guts.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* Global Utilities Block
-
-The global utilities block controls power management, I/O device
-enabling, power-on-reset configuration monitoring, general-purpose
-I/O signal configuration, alternate function selection for multiplexed
-signals, and clock control.
-
-Required properties:
-
- - compatible : Should define the compatible device type for
-   global-utilities.
-   Possible compatibles:
-	"fsl,qoriq-device-config-1.0"
-	"fsl,qoriq-device-config-2.0"
-	"fsl,<chip>-device-config"
-	"fsl,<chip>-guts"
- - reg : Offset and length of the register set for the device.
-
-Recommended properties:
-
- - fsl,has-rstcr : Indicates that the global utilities register set
-   contains a functioning "reset control register" (i.e. the board
-   is wired to reset upon setting the HRESET_REQ bit in this register).
-
- - fsl,liodn-bits : Indicates the number of defined bits in the LIODN
-   registers, for those SOCs that have a PAMU device.
-
-Examples:
-	global-utilities@e0000 {	/* global utilities block */
-		compatible = "fsl,mpc8548-guts";
-		reg = <e0000 1000>;
-		fsl,has-rstcr;
-	};
-
-	guts: global-utilities@e0000 {
-		compatible = "fsl,qoriq-device-config-1.0";
-		reg = <0xe0000 0xe00>;
-		fsl,has-rstcr;
-		#sleep-cells = <1>;
-		fsl,liodn-bits = <12>;
-	};
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/guts.txt
@@ -0,0 +1,44 @@
+* Global Utilities Block
+
+The global utilities block controls power management, I/O device
+enabling, power-on-reset configuration monitoring, general-purpose
+I/O signal configuration, alternate function selection for multiplexed
+signals, and clock control.
+
+Required properties:
+
+ - compatible : Should define the compatible device type for
+   global-utilities.
+   Possible compatibles:
+	"fsl,qoriq-device-config-1.0"
+	"fsl,qoriq-device-config-2.0"
+	"fsl,<chip>-device-config"
+	"fsl,<chip>-guts"
+ - reg : Offset and length of the register set for the device.
+
+Recommended properties:
+
+ - fsl,has-rstcr : Indicates that the global utilities register set
+   contains a functioning "reset control register" (i.e. the board
+   is wired to reset upon setting the HRESET_REQ bit in this register).
+
+ - fsl,liodn-bits : Indicates the number of defined bits in the LIODN
+   registers, for those SOCs that have a PAMU device.
+
+ - little-endian : Indicates that the global utilities block is little
+   endian. The default is big endian.
+
+Examples:
+	global-utilities@e0000 {	/* global utilities block */
+		compatible = "fsl,mpc8548-guts";
+		reg = <e0000 1000>;
+		fsl,has-rstcr;
+	};
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,qoriq-device-config-1.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		#sleep-cells = <1>;
+		fsl,liodn-bits = <12>;
+	};