openwrt/target/linux/generic/backport-6.6/790-34-v6.10-net-dsa-mt7530-fix-mirroring-frames-received-on-loca.patch

71 lines
2.3 KiB
Diff
Raw Normal View History

From d4097ddef078a113643a6dcde01e99741f852adb Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
Date: Sat, 13 Apr 2024 16:01:39 +0300
Subject: [PATCH 2/5] net: dsa: mt7530: fix mirroring frames received on local
port
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This switch intellectual property provides a bit on the ARL global control
register which controls allowing mirroring frames which are received on the
local port (monitor port). This bit is unset after reset.
This ability must be enabled to fully support the port mirroring feature on
this switch intellectual property.
Therefore, this patch fixes the traffic not being reflected on a port,
which would be configured like below:
tc qdisc add dev swp0 clsact
tc filter add dev swp0 ingress matchall skip_sw \
action mirred egress mirror dev swp0
As a side note, this configuration provides the hairpinning feature for a
single port.
Fixes: 37feab6076aa ("net: dsa: mt7530: add support for port mirroring")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/dsa/mt7530.c | 6 ++++++
drivers/net/dsa/mt7530.h | 4 ++++
2 files changed, 10 insertions(+)
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2480,6 +2480,9 @@ mt7530_setup(struct dsa_switch *ds)
PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
}
+ /* Allow mirroring frames received on the local port (monitor port). */
+ mt7530_set(priv, MT753X_AGC, LOCAL_EN);
+
/* Setup VLAN ID 0 for VLAN-unaware bridges */
ret = mt7530_setup_vlan0(priv);
if (ret)
@@ -2591,6 +2594,9 @@ mt7531_setup_common(struct dsa_switch *d
PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
}
+ /* Allow mirroring frames received on the local port (monitor port). */
+ mt7530_set(priv, MT753X_AGC, LOCAL_EN);
+
/* Flush the FDB table */
ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL);
if (ret < 0)
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -32,6 +32,10 @@ enum mt753x_id {
#define SYSC_REG_RSTCTRL 0x34
#define RESET_MCM BIT(2)
+/* Register for ARL global control */
+#define MT753X_AGC 0xc
+#define LOCAL_EN BIT(7)
+
/* Registers to mac forward control for unknown frames */
#define MT7530_MFC 0x10
#define BC_FFP(x) (((x) & 0xff) << 24)