openwrt/target/linux/bcm27xx/patches-5.10/950-0646-drm-vc4-Leverage-the-load-tracker-on-the-BCM2711.patch

122 lines
3.9 KiB
Diff
Raw Normal View History

From e404d30f2b14a83f223aab6c92da2a52d1c91f61 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime@cerno.tech>
Date: Mon, 21 Jun 2021 17:19:22 +0200
Subject: [PATCH] drm/vc4: Leverage the load tracker on the BCM2711
The load tracker was initially designed to report and warn about a load
too high for the HVS. To do so, it computes for each plane the impact
it's going to have on the HVS, and will warn (if it's enabled) if we go
over what the hardware can process.
While the limits being used are a bit irrelevant to the BCM2711, the
algorithm to compute the HVS load will be one component used in order to
compute the core clock rate on the BCM2711.
Let's remove the hooks to prevent the load tracker to do its
computation, but since we don't have the same limits, don't check them
against them, and prevent the debugfs file to enable it from being
created.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
drivers/gpu/drm/vc4/vc4_debugfs.c | 7 +++++--
drivers/gpu/drm/vc4/vc4_drv.h | 3 ---
drivers/gpu/drm/vc4/vc4_kms.c | 16 +++++-----------
drivers/gpu/drm/vc4/vc4_plane.c | 3 ---
4 files changed, 10 insertions(+), 19 deletions(-)
--- a/drivers/gpu/drm/vc4/vc4_debugfs.c
+++ b/drivers/gpu/drm/vc4/vc4_debugfs.c
@@ -7,6 +7,7 @@
#include <linux/circ_buf.h>
#include <linux/ctype.h>
#include <linux/debugfs.h>
+#include <linux/platform_device.h>
#include "vc4_drv.h"
#include "vc4_regs.h"
@@ -26,8 +27,10 @@ vc4_debugfs_init(struct drm_minor *minor
struct vc4_dev *vc4 = to_vc4_dev(minor->dev);
struct vc4_debugfs_info_entry *entry;
- debugfs_create_bool("hvs_load_tracker", S_IRUGO | S_IWUSR,
- minor->debugfs_root, &vc4->load_tracker_enabled);
+ if (!of_device_is_compatible(vc4->hvs->pdev->dev.of_node,
+ "brcm,bcm2711-vc5"))
+ debugfs_create_bool("hvs_load_tracker", S_IRUGO | S_IWUSR,
+ minor->debugfs_root, &vc4->load_tracker_enabled);
list_for_each_entry(entry, &vc4->debugfs_list, link) {
drm_debugfs_create_files(&entry->info, 1,
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -205,9 +205,6 @@ struct vc4_dev {
int power_refcount;
- /* Set to true when the load tracker is supported. */
- bool load_tracker_available;
-
/* Set to true when the load tracker is active. */
bool load_tracker_enabled;
--- a/drivers/gpu/drm/vc4/vc4_kms.c
+++ b/drivers/gpu/drm/vc4/vc4_kms.c
@@ -598,9 +598,6 @@ static int vc4_load_tracker_atomic_check
struct drm_plane *plane;
int i;
- if (!vc4->load_tracker_available)
- return 0;
-
priv_state = drm_atomic_get_private_obj_state(state,
&vc4->load_tracker);
if (IS_ERR(priv_state))
@@ -675,9 +672,6 @@ static void vc4_load_tracker_obj_fini(st
{
struct vc4_dev *vc4 = to_vc4_dev(dev);
- if (!vc4->load_tracker_available)
- return;
-
drm_atomic_private_obj_fini(&vc4->load_tracker);
}
@@ -685,9 +679,6 @@ static int vc4_load_tracker_obj_init(str
{
struct vc4_load_tracker_state *load_state;
- if (!vc4->load_tracker_available)
- return 0;
-
load_state = kzalloc(sizeof(*load_state), GFP_KERNEL);
if (!load_state)
return -ENOMEM;
@@ -891,9 +882,12 @@ int vc4_kms_load(struct drm_device *dev)
"brcm,bcm2711-vc5");
int ret;
+ /*
+ * The limits enforced by the load tracker aren't relevant for
+ * the BCM2711, but the load tracker computations are used for
+ * the core clock rate calculation.
+ */
if (!is_vc5) {
- vc4->load_tracker_available = true;
-
/* Start with the load tracker enabled. Can be
* disabled through the debugfs load_tracker file.
*/
--- a/drivers/gpu/drm/vc4/vc4_plane.c
+++ b/drivers/gpu/drm/vc4/vc4_plane.c
kernel: Refresh on 5.10.138 Refresh all patches on top of kernel 5.10.138. The following patches were applied upstream: bcm27xx/patches-5.10/950-0311-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch bcm27xx/patches-5.10/950-0317-vc4_hdmi-Remove-firmware-logic-for-MAI-threshold-set.patch bcm27xx/patches-5.10/950-0346-drm-vc4-A-present-but-empty-dmas-disables-audio.patch bcm27xx/patches-5.10/950-0354-drm-vc4-Add-the-2711-HVS-as-a-suitable-DMA-node.patch bcm27xx/patches-5.10/950-0413-drm-vc4-hdmi-Don-t-access-the-connector-state-in-res.patch bcm27xx/patches-5.10/950-0505-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch bcm27xx/patches-5.10/950-0512-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch bcm27xx/patches-5.10/950-0560-drm-vc4-drv-Remove-the-DSI-pointer-in-vc4_drv.patch bcm27xx/patches-5.10/950-0561-drm-vc4-dsi-Use-snprintf-for-the-PHY-clocks-instead-.patch bcm27xx/patches-5.10/950-0562-drm-vc4-dsi-Introduce-a-variant-structure.patch bcm27xx/patches-5.10/950-0565-drm-vc4-Correct-pixel-order-for-DSI0.patch bcm27xx/patches-5.10/950-0566-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch bcm27xx/patches-5.10/950-0567-drm-vc4-Fix-dsi0-interrupt-support.patch bcm27xx/patches-5.10/950-0568-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch bcm27xx/patches-5.10/950-0647-drm-vc4-Fix-timings-for-interlaced-modes.patch bcm27xx/patches-5.10/950-0695-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch Upstream sets the pixel clock to 340MHz now, do not set it to 600MHz any more. bcm27xx/patches-5.10/950-0576-drm-vc4-hdmi-Raise-the-maximum-clock-rate.patch Fixes: 89956c653252 ("kernel: bump 5.10 to 5.10.138") Fixes: 4209c33ae27d ("kernel: bump 5.10 to 5.10.137") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-08-28 13:09:23 +00:00
@@ -535,9 +535,6 @@ static void vc4_plane_calc_load(struct d
struct vc4_dev *vc4;
vc4 = to_vc4_dev(state->plane->dev);
- if (!vc4->load_tracker_available)
- return;
-
vc4_state = to_vc4_plane_state(state);
crtc_state = drm_atomic_get_existing_crtc_state(state->state,
state->crtc);