ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-21 06:33:41 +00:00
Code Issues Actions 7 Packages Projects Releases Wiki Activity
960f5f94d7
openwrt/package/firmware/layerscape/ppfe-firmware/Makefile

53 lines
1.3 KiB
Makefile
Raw Normal View History

layerscape: add 64b/32b target for ls1012ardb device The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:18:23 +00:00
#
# Copyright (C) 2016 Jiang Yutang <jiangyutang1978@gmail.com>
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
PKG_NAME:=ppfe
ppfe-firmware: Bump to lf-6.6.3-1.0.0 Bump ppfe-firmware package to lf-6.6.3-1.0.0 Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2024-03-18 09:49:55 +00:00
PKG_VERSION:=6.6.3.1.0.0
ppfe-firmware: Bump to lf-6.1.1-1.0.0 and switch to github The default location of ppfe-firmware has been changed from codeuaurora to github. Also use the latest tag for Layerscape Linux Development POC from NXP. Tested on: * NXP FRWY-LS1012A Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch> (reset PKG_RELEASE) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2023-04-12 09:33:37 +00:00
PKG_RELEASE:=1
layerscape: add 64b/32b target for ls1012ardb device The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:18:23 +00:00
PKG_SOURCE_PROTO:=git
ppfe-firmware: Bump to lf-6.1.1-1.0.0 and switch to github The default location of ppfe-firmware has been changed from codeuaurora to github. Also use the latest tag for Layerscape Linux Development POC from NXP. Tested on: * NXP FRWY-LS1012A Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch> (reset PKG_RELEASE) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2023-04-12 09:33:37 +00:00
PKG_SOURCE_URL:=https://github.com/nxp-qoriq/qoriq-engine-pfe-bin
ppfe-firmware: Bump to lf-6.6.3-1.0.0 Bump ppfe-firmware package to lf-6.6.3-1.0.0 Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2024-03-18 09:49:55 +00:00
PKG_SOURCE_VERSION:=lf-6.6.3-1.0.0
PKG_MIRROR_HASH:=836da0d1ace6c5896c434940b5f06ae9ddcb871959e9f5aa3df75d67e39aec41
packages: mark packages depending on a target as nonshared The packages can't be build as shared packages due to the unmet dependencies. Fixes FS#418. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-19 08:18:57 +00:00
treewide: Mark packages nonshared if they depend on @TARGET_ This marks all packages which depend on a target with @TARGET nonshared. If they are not marked nonshared they would be build by the SDK build and if this happens with a different SDK, then the SDK from the target the package depends on, the package would not be added to the index. This should fix the image builder for some of these packages. This should fix the image builder at least for bcm27xx/bcm2710 and bcm4908/generic. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-05-02 22:35:38 +00:00
PKG_FLAGS:=nonshared
layerscape: add 64b/32b target for ls1012ardb device The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:18:23 +00:00
include $(INCLUDE_DIR)/package.mk
layerscape: support LSDK ppfe This patch is to use ppfe git tree on LSDK github instead of private git tree, and support the latest ppfe on ls1012ardb. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-26 07:33:00 +00:00
RSTRIP:=:
STRIP:=:
layerscape: add 64b/32b target for ls1012ardb device The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:18:23 +00:00
layerscape: support LSDK ppfe This patch is to use ppfe git tree on LSDK github instead of private git tree, and support the latest ppfe on ls1012ardb. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-26 07:33:00 +00:00
define Package/layerscape-ppfe
SECTION:=firmware
CATEGORY:=Firmware
TITLE:=NXP Layerscape PPFE firmware
layerscape: update ppfe-firmware to LSDK-18.06 This patch is to update ppfe-firmware to LSDK-18.06 release. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-07-02 08:33:35 +00:00
DEPENDS:=@TARGET_layerscape
layerscape: support LSDK ppfe This patch is to use ppfe git tree on LSDK github instead of private git tree, and support the latest ppfe on ls1012ardb. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-26 07:33:00 +00:00
CONFIG_FW:=ls1012a/u-boot/pfe_fw_sbl.itb
CONFIG_BIN1:=ls1012a/slow_path/ppfe_class_ls1012a.elf
CONFIG_BIN2:=ls1012a/slow_path/ppfe_tmu_ls1012a.elf
layerscape: update ppfe firmware to LSDK1712 Updated ppfe firmware to NXP LSDK1712 release. Used ppfe firmware git tree on NXP github since it was migrated here from qoriq-open-source github. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2018-01-18 08:36:49 +00:00
CONFIG_LIC:=NXP-Binary-EULA.txt
layerscape: add 64b/32b target for ls1012ardb device The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:18:23 +00:00
endef
define Build/Compile
endef
layerscape: support LSDK ppfe This patch is to use ppfe git tree on LSDK github instead of private git tree, and support the latest ppfe on ls1012ardb. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-26 07:33:00 +00:00
define Package/layerscape-ppfe/install
$(INSTALL_DIR) $(STAGING_DIR_IMAGE)
$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(CONFIG_FW) \
$(STAGING_DIR_IMAGE)/pfe.itb
$(INSTALL_DIR) $(1)/lib/firmware/
$(INSTALL_DATA) \
$(PKG_BUILD_DIR)/$(CONFIG_BIN1) \
$(PKG_BUILD_DIR)/$(CONFIG_BIN2) \
$(PKG_BUILD_DIR)/$(CONFIG_LIC) \
$(1)/lib/firmware/
layerscape: add 64b/32b target for ls1012ardb device The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-28 16:18:23 +00:00
endef
layerscape: support LSDK ppfe This patch is to use ppfe git tree on LSDK github instead of private git tree, and support the latest ppfe on ls1012ardb. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2017-10-26 07:33:00 +00:00
$(eval $(call BuildPackage,layerscape-ppfe))
Reference in New Issue Copy Permalink