openwrt/target/linux/generic/backport-5.15/733-v6.2-02-net-mediatek-sgmii-ensure-the-SGMII-PHY-is-powered-d.patch

From 7ff82416de8295c61423ef6fd75f052d3837d2f7 Mon Sep 17 00:00:00 2001
From: Alexander Couzens <lynxis@fe80.eu>
Date: Wed, 1 Feb 2023 19:23:29 +0100
Subject: [PATCH] net: mediatek: sgmii: ensure the SGMII PHY is powered down on
 configuration
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The code expect the PHY to be in power down which is only true after reset.
Allow changes of the SGMII parameters more than once.

Only power down when reconfiguring to avoid bouncing the link when there's
no reason to - based on code from Russell King.

There are cases when the SGMII_PHYA_PWD register contains 0x9 which
prevents SGMII from working. The SGMII still shows link but no traffic
can flow. Writing 0x0 to the PHYA_PWD register fix the issue. 0x0 was
taken from a good working state of the SGMII interface.

Fixes: 42c03844e93d ("net-next: mediatek: add support for MediaTek MT7622 SoC")
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
[ bmork: rebased and squashed into one patch ]
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
---
 drivers/net/ethernet/mediatek/mtk_eth_soc.h |  2 ++
 drivers/net/ethernet/mediatek/mtk_sgmii.c   | 39 +++++++++++++++------
 2 files changed, 30 insertions(+), 11 deletions(-)

--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -1062,11 +1062,13 @@ struct mtk_soc_data {
  * @regmap:            The register map pointing at the range used to setup
  *                     SGMII modes
  * @ana_rgc3:          The offset refers to register ANA_RGC3 related to regmap
+ * @interface:         Currently configured interface mode
  * @pcs:               Phylink PCS structure
  */
 struct mtk_pcs {
 	struct regmap	*regmap;
 	u32             ana_rgc3;
+	phy_interface_t	interface;
 	struct phylink_pcs pcs;
 };
 
--- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
@@ -24,6 +24,10 @@ static int mtk_pcs_setup_mode_an(struct
 {
 	unsigned int val;
 
+	regmap_read(mpcs->regmap, mpcs->ana_rgc3, &val);
+	val &= ~RG_PHY_SPEED_MASK;
+	regmap_write(mpcs->regmap, mpcs->ana_rgc3, val);
+
 	/* Setup the link timer and QPHY power up inside SGMIISYS */
 	regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER,
 		     SGMII_LINK_TIMER_DEFAULT);
@@ -36,9 +40,6 @@ static int mtk_pcs_setup_mode_an(struct
 	val |= SGMII_AN_RESTART;
 	regmap_write(mpcs->regmap, SGMSYS_PCS_CONTROL_1, val);
 
-	regmap_read(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, &val);
-	val &= ~SGMII_PHYA_PWD;
-	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, val);
 
 	return 0;
 
@@ -69,11 +70,6 @@ static int mtk_pcs_setup_mode_force(stru
 	val |= SGMII_SPEED_1000;
 	regmap_write(mpcs->regmap, SGMSYS_SGMII_MODE, val);
 
-	/* Release PHYA power down state */
-	regmap_read(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, &val);
-	val &= ~SGMII_PHYA_PWD;
-	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, val);
-
 	return 0;
 }
 
@@ -85,12 +81,32 @@ static int mtk_pcs_config(struct phylink
 	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
 	int err = 0;
 
+	if (mpcs->interface != interface) {
+		/* PHYA power down */
+		regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
+				   SGMII_PHYA_PWD, SGMII_PHYA_PWD);
+
+		mpcs->interface = interface;
+	}
+
 	/* Setup SGMIISYS with the determined property */
 	if (interface != PHY_INTERFACE_MODE_SGMII)
 		err = mtk_pcs_setup_mode_force(mpcs, interface);
 	else if (phylink_autoneg_inband(mode))
 		err = mtk_pcs_setup_mode_an(mpcs);
 
+	/* Release PHYA power down state
+	 * Only removing bit SGMII_PHYA_PWD isn't enough.
+	 * There are cases when the SGMII_PHYA_PWD register contains 0x9 which
+	 * prevents SGMII from working. The SGMII still shows link but no traffic
+	 * can flow. Writing 0x0 to the PHYA_PWD register fix the issue. 0x0 was
+	 * taken from a good working state of the SGMII interface.
+	 * Unknown how much the QPHY needs but it is racy without a sleep.
+	 * Tested on mt7622 & mt7986.
+	 */
+	usleep_range(50, 100);
+	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, 0);
+
 	return err;
 }
 
@@ -145,6 +161,7 @@ int mtk_sgmii_init(struct mtk_sgmii *ss,
 			return PTR_ERR(ss->pcs[i].regmap);
 
 		ss->pcs[i].pcs.ops = &mtk_pcs_ops;
+		ss->pcs[i].interface = PHY_INTERFACE_MODE_NA;
 	}
 
 	return 0;